giriiş
The Mopeka PRO+ Long Range Ultrasonic Wireless Propane Tank Monitor provides accurate, real-time propane level readings for residential and commercial tanks up to 2000 gallons. Utilizing advanced ultrasonic technology, this device wirelessly transmits tank level data via Bluetooth to your mobile device, offering convenience and peace of mind. This manual outlines the steps for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your Mopeka PRO+ sensor.
Kurmak
1. Prepare the Tank Surface
Ensure the bottom of your propane tank is clean and free of dirt, rust, or debris. A smooth, clean surface is crucial for accurate sensor readings. For tanks with a welding seam on the bottom, a Mopeka Seam Adapter (sold separately) may be required to ensure a secure and precise fit, and the most accurate reading.
Image: Mopeka PRO+ sensor attached to the underside of a propane tank.
2. Attach the Sensor
The Mopeka PRO+ sensor features integrated magnets for easy attachment. Place the sensor firmly onto the center of the underside of your tank. For non-magnetic tanks (e.g., aluminum), an optional adhesive mounting collar is available separately.
Image: Mopeka PRO+ sensor and the Mopeka Co-Pilot app interface on a smartphone.
3. Download and Pair with the Mopeka Co-Pilot App
Download the free Mopeka Co-Pilot app from the Apple App Store or Google Play Store. Once installed, open the app and follow the on-screen instructions to pair your sensor via Bluetooth.
Image: Propane tank with sensor, illustrating the availability of the Mopeka Co-Pilot app on both Apple App Store and Google Play.
Monitörü Çalıştırma
Real-time Level Monitoring
Once paired, the Mopeka Co-Pilot app will display the current propane level as a percentage. The sensor provides highly accurate readings, down to 0.01 of an inch, for various commodities and LPG tank sizes up to 2000 gallons.
Extended Range and Connectivity
The PRO+ sensor offers an RF signal range of up to 1000 feet. For extended range or remote monitoring, the sensor can be paired with a Mopeka Wi-Fi Bridge (sold separately). The Wi-Fi Bridge allows you to access tank data from anywhere via the Mopeka Co-Pilot app, by uploading sensor data to the cloud.
Image: Diagram illustrating the key features of the Mopeka PRO+ sensor, including its long-range capabilities and cloud integration.
Customizable Alarms
The Mopeka Co-Pilot app allows you to set customizable alarms. These alarms can notify you when your tank level drops below a certain percentage, ensuring you never unexpectedly run out of propane.
Image: The Mopeka PRO+ sensor positioned to monitor a large residential propane tank, highlighting the benefit of always knowing your propane level.
Bakım
- Pil Değişimi: The Mopeka PRO+ sensor uses replaceable AAA batteries, offering a battery life of up to five years. When the app indicates low battery, replace the batteries promptly to ensure continuous monitoring.
- Sensör Temizleme: Periodically inspect the sensor and the tank surface where it is attached. Clean any accumulated dirt or debris to maintain optimal contact and accurate readings.
- Çevresel Hususlar: The sensor is designed to withstand harsh outdoor elements. However, extreme temperatures or heavy snow/ice accumulation around the sensor area may temporarily affect signal strength or readings. Ensure the sensor area is clear for best performance.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Yanlış Okumalar | Improper sensor placement; tank seam interference; dirty tank surface. | Ensure sensor is centered and flush. Use a Mopeka Seam Adapter if a seam is present. Clean the tank bottom thoroughly. |
| Bluetooth Bağlantısı Yok | Out of range; Bluetooth disabled on device; sensor battery low. | Move closer to the tank. Enable Bluetooth. Check and replace sensor batteries. |
| App Not Updating | App not running in background; Wi-Fi Bridge connectivity issues (if applicable). | Ensure app is open or allowed to run in background. Check Wi-Fi Bridge connection and power. |
| Sensör Algılanmadı | Sensor not powered on; battery dead; sensor malfunction. | Verify sensor is powered. Replace batteries. If issue persists, contact Mopeka support. |
Özellikler
| Özellik | Detay |
|---|---|
| Marka | Mopeka |
| Örnek | M1015002A |
| Sensör Tipi | Ultrasonik |
| Tank Kapasitesi | 2000 galona kadar |
| İletişim | Bluetooth (Long Range), Wi-Fi (with optional Bridge) |
| Menzil | Up to 1000 feet (RF signal) |
| Pil Türü | 2 adet AAA pil (dahil) |
| Pil Ömrü | 5 yıla kadar |
| Montaj | Magnetic attachment (optional adhesive collar for non-magnetic tanks) |
| Çalışma Sıcaklığı | -50°F ila 140°F (-45°C ila 60°C) |
Image: Visual representation of Mopeka PRO+ product specifications.
Garanti ve Destek
The Mopeka PRO+ Long Range sensor comes with a 3-year warranty from the manufacturer, Mopeka Products, LLC. For detailed warranty information, technical support, or to purchase accessories like the Seam Adapter or Wi-Fi Bridge, please visit the official Mopeka website or refer to the comprehensive Installation Manual.
You can access the official Installation Manual (PDF) Burada.
