Lepro 40ft RGB LED Strip Lights User Manual

1. Giriş

Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.

Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.

2. Kutuda Neler Var?

Lütfen paket içeriğini kontrol ederek tüm öğelerin mevcut olduğundan emin olun:

• 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
• 1 x 44-Key IR Remote Control
• 1 x 24V Power Adapter (US Plug)

3. Güvenlik Bilgileri

Read all safety instructions before installation and use. Keep this manual for future reference.

• Sadece İç Mekanda Kullanım: This product is designed for indoor use and is not waterproof.
• Güç Kaynağı: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
• Kurulum Yüzeyi: Ensure the installation surface is clean, dry, and smooth for optimal adhesive performance.
• Şeridi Kesmek: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
• Aşırı Isınmayı Önleyin: Do not coil the LED strip tightly when powered on, as this can cause overheating.
• Çocuklar ve Evcil Hayvanlar: Ürünü ve bileşenlerini çocukların ve evcil hayvanların erişemeyeceği yerde saklayın.

4. Kurulum ve Yükleme

Doğru kurulum için şu adımları izleyin:

1. Yüzeyi Hazırlayın: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
2. Ölçün ve (gerekirse) kesin: Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
3. Şeridi takın: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
4. Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
5. Gücü bağlayın: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
6. Uzaktan Etkinleştir: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.

Figure 2: Visual guide for LED strip installation steps.

Figure 3: Connection diagram and remote activation.

Figure 4: 3M Adhesive and Fixing Clips.

5. Kullanım Talimatları

Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.

Figure 5: 44-Key IR Remote Control Layout.

Uzaktan Kumanda Fonksiyonları:

• Açık/Kapalı: Power button to turn the lights on or off.
• Parlaklık Ayarı: Kullanın ↑ Ve ↓ buttons to increase or decrease brightness.
• Renk Seçimi: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
• DIY Colors: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
  • Bir'e basın Kendin Yap düğme.
  • Kullanın ↑ Ve ↓ arrows next to R, G, B to adjust the intensity of each primary color.
  • aynı basın Kendin Yap button again to save your custom color.
• Mod Seçimi: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
  • FLAŞ: Jumps between colors.
  • SOLMA3/SOLMA7: Fades between 3 or 7 colors.
  • JUMP3/JUMP7: Jumps between 3 or 7 colors.
  • OTO: Tüm modlar arasında geçiş yapar.
  • HIZLI/YAVAŞ: Dinamik modların hızını ayarlar.

Figure 6: Remote control in use for ambient lighting.

6. Bakım

Proper maintenance ensures the longevity of your LED strip lights.

• Temizlik: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
• Depolamak: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
• Bükülmekten Kaçının: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.

7. Sorun Giderme

Sorunlarla karşılaşırsanız aşağıdaki yaygın sorunlara ve çözümlere bakın:

8. Özellikler

Figure 7: ETL Listed 24V Power Adapter.

9. Garanti ve Destek

Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro webalan.

İletişim Bilgileri:

• Webalan: www.lepro.com (Lütfen resmi bilgileri kontrol edin) web(En güncel iletişim bilgileri için lütfen siteyi ziyaret edin.)
• E-posta: Ürün ambalajına bakın veya webalan.