1. Giriş
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.
Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.
2. Güvenlik Bilgileri
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- Montaj sırasında daima güvenlik gözlüğü gibi uygun güvenlik ekipmanlarını kullanın.
- Use only the tools specified in the installation guide.
- Küçük parçaları çocuklardan uzak tutun.
- Do not modify the product in any way, as this may compromise its security features and void the warranty.
3. Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:
- Dış Kulp Takımı Montajı
- Interior Accent Lever Assembly
- Mandal Mekanizması
- Grev plakası
- Montaj Vidaları ve Bağlantı Elemanları
- Kurulum Şablonu (eğer dahilse)
- Anahtarlar (varsa)
4. Kurulum ve Kurulum
The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.
4.1 Kapı Hazırlığı
- Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
- If replacing an existing handleset, remove the old hardware.
4.2 Installing the Latch
- Insert the latch into the edge bore hole of the door.
- Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.
4.3 Installing the Exterior Handleset
- Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
- Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.
4.4 Installing the Interior Lever
- Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
- Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.
4.5 Karşılık Plakasının Takılması
- Align the strike plate with the latch bolt on the door frame.
- Mark and chisel out the necessary area for a flush fit, if required.
- Secure the strike plate with the provided screws.
5. Kullanım Talimatları
To operate your Schlage Addison Handleset:
- Kilitlemek için: From the interior, rotate the thumbturn to the locked position. From the exterior, insert the key and turn to lock.
- Kilidini Açmak İçin: From the interior, rotate the thumbturn to the unlocked position. From the exterior, insert the key and turn to unlock.
- Açmak için: Depress the thumbpiece on the exterior handleset or the lever on the interior to retract the latch bolt.
6. Bakım
Proper maintenance ensures the longevity and smooth operation of your handleset.
- Temizlik: Sap setini yumuşak bir bezle düzenli olarak temizleyin.amp Kumaşı aşındırıcı temizleyicilerden, çözücülerden veya sert kimyasallardan uzak tutun; bunlar cilaya zarar verebilir.
- Yağlama: Periodically apply a small amount of graphite-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt.
- Sıkma: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Lever/Thumbpiece is stiff or sticky | Lack of lubrication, dirt buildup, misaligned components | Apply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation. |
| Anahtar düzgün dönmüyor | Dirt in keyway, worn key, lock mechanism needs lubrication | Apply graphite lubricant to the keyway. Try a spare key. |
| Kapı düzgün kapanmıyor. | Strike plate misalignment, latch bolt obstruction | Adjust the strike plate position. Ensure no debris is blocking the latch bolt. |
| Handleset feels loose | Mounting screws are loose | Görünen tüm montaj vidalarını sıkın. |
8. Özellikler
- Model Numarası: 163604
- Marka: SCHLAGE
- Malzeme: Metal
- Renk: Saten Nikel
- Sona ermek: Saten
- Stil: Modern
- Ürün Ölçüleri: 16.51 x 20.32 x 52.07 cm (6.5 x 8 x 20.5 inç)
- Ürün Ağırlığı: 2.04 kg (4.5 lbs)
- Sap Tipi: Kaldıraç
- Özellik: Easy to Install, Patented adjustable bottom thru-bolt
- Üretici: Allegion Canada Inc
- Menşei ülke: Meksika
9. Garanti ve Destek
Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage websitesine bakın veya ürününüzle birlikte gelen garanti belgesine bakın.
Daha fazla yardım için lütfen şu adresi ziyaret edin: SCHLAGE Mağazası.
