JBL CONTROL 52

JBL Professional Control 52 Surface-Mount Satellite Speaker

Model: CONTROL 52

Kullanım Kılavuzu

giriiş

The JBL Professional Control 52 is a stylish surface-mount satellite loudspeaker designed for subwoofer-satellite loudspeaker systems. It delivers superb high-fidelity sound through a low-distortion 60 mm (2.5 inch) driver. Key features include a secondary bucking magnet for high efficiency, a rubber half-roll surround for enhanced bass performance, a 19 mm (0.75 inch) copper-clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for consistent impedance and extended high-frequency response. The included wall bracket allows for angling the speaker up to 45 degrees off-axis, providing flexible placement options.

Temel Özellikler

Kutuda Neler Var?

Kurulum ve Yükleme

The Control 52 satellite speakers are designed for surface mounting and come with all necessary brackets for installation. Ensure you have appropriate tools and follow local building codes for secure mounting.

JBL Control 52 Satellite Speaker, front view

Şekil 1: Ön view of the JBL Control 52 Satellite Speaker.

Hoparlörlerin Montajı

  1. Montaj Yerini Belirleyin: Choose a location on a wall or other suitable surface that provides optimal sound dispersion and is structurally sound. The speakers can be angled up to 45 degrees.
  2. Braketleri Takın: Use the included wall-mount brackets. Securely attach the brackets to the chosen surface using appropriate screws and anchors (not included, depending on wall material).
  3. Kablolamayı Bağlayın: Hoparlör kablolarını bağlayın amplifier to the binding posts on the back of each Control 52 speaker. Ensure correct polarity (red to positive, black to negative).
  4. Hoparlörleri Monte Edin: Attach the Control 52 speakers to the installed brackets. The design allows for various orientations (vertical or horizontal) and angles.
Pair of JBL Control 52 Satellite Speakers with wall mounts

Figure 2: A pair of JBL Control 52 Satellite Speakers, showing the integrated wall mounts.

Kablolama Bağlantıları

The Control 52 speakers are passive and require an external amplifier. Connect the speaker wires to the spring-loaded terminals on the rear of each speaker. Match the positive (+) terminal on the speaker to the positive (+) terminal on your amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on your ampcankurtaran.

Taraf view of JBL Control 52 Satellite Speaker showing mounting bracket

Şekil 3: Yan view of the JBL Control 52 Satellite Speaker, highlighting the adjustable mounting bracket.

Video Guide: Speaker Wiring and Mounting

Video 1: This video demonstrates general speaker wiring and mounting techniques, which can be applied to the JBL Control 52 speakers. It shows how to connect speaker cables and secure speakers using brackets.

Kullanım Talimatları

Doğru şekilde kurulup uyumlu bir cihaza bağlandıktan sonra amplifier, the JBL Control 52 speakers are ready for use. These speakers are designed to work as part of a subwoofer-satellite system, meaning they handle mid-range and high frequencies, while a separate subwoofer handles the bass.

Açma/Kapatma

The Control 52 speakers are passive and do not have their own power switch. They are powered by the connected amplifier. Turn your amplifier on or off to control the speakers.

Ses Kontrolü

Sesi aşağıdaki komutları kullanarak ayarlayın. amplifier or audio source. Avoid setting the volume too high, which can cause distortion and potentially damage the speakers.

Optimum Yerleştirme

For the best audio experience, position the speakers to create a balanced sound field. Experiment with the angling feature of the wall brackets to direct sound towards the primary listening area. When used with a subwoofer, ensure the subwoofer is placed in a location that provides even bass distribution throughout the room.

Bakım

Regular maintenance helps ensure the longevity and optimal performance of your JBL Control 52 speakers.

Sorun giderme

If you experience issues with your JBL Control 52 speakers, refer to the following common troubleshooting steps:

SorunOlası NedenÇözüm
Hoparlörlerden ses gelmiyor
  • Amplifier is off or muted.
  • Incorrect speaker wiring.
  • Audio source not playing or improperly connected.
  • Emin olmak amplifier is on and volume is up, not muted.
  • Check all speaker wire connections for correct polarity (+ to + and - to -).
  • Verify audio source is active and connected correctly to the ampcankurtaran.
Bozuk veya net olmayan ses
  • Volume too high on amphayat veya kaynak.
  • Hoparlör kablosu hasarlı.
  • Uygunsuz amplif ayarları.
  • Ses seviyesini azaltın ampLifier veya ses kaynağı.
  • Hoparlör kablolarını hasar açısından kontrol edin ve gerekirse değiştirin.
  • Kontrol etmek amplifier settings (e.g., tone controls, crossover settings) to ensure they are appropriate for satellite speakers.
Bir hoparlör çalışmıyor
  • Loose or incorrect wiring for that speaker.
  • Hoparlör arızalı.
  • Check wiring connections for the non-working speaker.
  • Swap the non-working speaker with a working one to determine if the speaker itself is faulty.

Özellikler

Model AdıKONTROL 52
MarkaJBL
Hoparlör TipiSatellite Speaker (for Subwoofer-Satellite Loudspeaker System)
Montaj TipiYüzey Montajı
Konuşmacı Ampkimlik TürüPasif
Empedans16 Ohm
Frekans Tepkisi140 Hz – 20 kHz
Hoparlör Maksimum Çıkış Gücü600 Watt (Tepe)
Woofer Çapı60 mm (2.5 inç)
Tweeter Çapı19 mm (0.75 inç)
Ürün Boyutları2"D x 5"W x 3"H (approximate, per speaker)
Ürün Ağırlığı3.7 pound (hoparlör başına)
RenkSiyah
MalzemeAlüminyum
İç/Dış Mekan KullanımıKapalı
Bağlantı TeknolojisiKablolu
Önerilen KullanımlarSurround Ses Sistemleri için
UPC050036905190

Garanti ve Destek

The JBL Professional Control 52 Surface-Mount Satellite Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official JBL webalan.

For technical support, service, or additional product information, please contact JBL customer service or visit the Amazon'da JBL Mağazası.

İlgili Belgeler - KONTROL 52

Önview JBL 5000 Serisi Sinema Sistemleri: Kullanıcı Kılavuzu ve Teknik Özellikler
JBL 5000 Serisi Sinema Sistemleri için kapsamlı kullanıcı kılavuzu; sistem yapılandırmalarını, dijital kontrolü, bağlantıları, güç gereksinimlerini, hoparlör yerleşimini ve 5671, 5672 ve 5674 modelleri için teknik özellikleri ayrıntılı olarak açıklamaktadır.
Önview JBL Control 416C/T Standart Kapsama Serisi Tavan Hoparlörü - Teknik Özellikler
Ticari ve profesyonel ses kurulumları için tasarlanmış 6.5 ​​inçlik iki yönlü koaksiyel tavan hoparlörü JBL Control 416C/T'nin ayrıntılı teknik özellikleri, özellikleri ve performans verileri.
Önview JBL 4367 Kullanım Kılavuzu: 15 inç 2 Yönlü Ayaklı Hoparlör
Bu kullanım kılavuzu, 15 inçlik 2 yollu zemin tipi hoparlör olan JBL 4367 hakkında ayrıntılı bilgi sunmaktadır. Optimum ses performansı için kurulum, yerleştirme, bağlantılar, kontroller ve bakım hakkında bilgi edinin.
Önview JBL JS-120 Hoparlör Standı - Özellikler, Teknik Özellikler ve Montaj
JBL JS-120 Hoparlör Standı hakkında özellikleri, teknik özellikleri, uyumlu hoparlör modelleri ve montaj talimatları dahil olmak üzere ayrıntılı bilgiler. Gelişmiş ses performansı ve kararlılığı için tasarlanmıştır.
Önview JBL 5000 Serisi Sinema Sistemleri Profesyonel Ekran Kanalı Hoparlörleri için Kullanıcı Kılavuzu
JBL 5000 Serisi Sinema Sistemleri (modeller 5671, 5672, 5674) için kapsamlı kullanıcı kılavuzu. Profesyonel sinema ses sistemleri için kurulum, yapılandırma, dijital kontrol, bağlantılar, güç, yerleştirme ve ayrıntılı teknik özellikleri kapsar.
Önview JBL STX812M Teknik Kılavuzu ve Özellikleri
JBL STX812M profesyonel hoparlör için akustik, elektriksel ve fiziksel özellikler, bağlantı şemaları ve bileşen parça listeleri de dahil olmak üzere ayrıntılı teknik kılavuz ve özellikler.