Supermicro X11SSH-F-O Motherboard User Manual

giriiş

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Supermicro X11SSH-F-O Micro ATX Server Motherboard. Designed for server applications, this motherboard features an LGA1151 socket, Intel C236 chipset, and supports DDR4 memory. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

Ürün Bittiview

The Supermicro X11SSH-F-O is a high-performance Micro ATX motherboard built for server environments, offering robust features and reliable operation.

Şekil 1: Yukarıdan aşağıya view of the Supermicro X11SSH-F-O Motherboard, showing the CPU socket, RAM slots, PCIe slots, and various connectors.

Temel Özellikler:

• Soket: LGA1151
• Yonga seti: Intel C236
• Hafıza: 4x 288pin DDR4-2133/ 1866/ 1600 DIMM Slots, ECC, Unbuffered, Max Capacity of 64GB
• Slotlar: 1x PCI-Express 3.0 x16 Slot (runs at x8), 2x PCI-Express 3.0 x8 Slots (one runs at x4)
• SATA: 8x SATA3 Ports, Support RAID 0, 1, 5, 10
• Form Faktörü: MicroATX, 9.6 x 9.6 inch / 24.4 x 24.4 cm
• LAN: Dual Intel I210-AT Gigabit Ethernet Controller

Kurulum ve Yükleme

Kuruluma başlamadan önce sisteminizin kapalı olduğundan ve prizden çıkarılmış olduğundan emin olun. Statik deşarjı önlemek için anakartı daima kenarlarından tutun.

1. Şasinin Hazırlanması

Ensure your computer chassis is compatible with the Micro ATX form factor. Install the I/O shield provided with the motherboard into the chassis's I/O opening.

2. CPU Kurulumu

1. Anakart üzerinde LGA1151 CPU soketini bulun.
2. Gently push down the load lever and pull it out to open the CPU socket retention frame.
3. Carefully align the CPU with the socket, ensuring the golden triangle on the CPU matches the triangle mark on the socket. Do not force the CPU into the socket.
4. Lower the retention frame and push the load lever back into place to secure the CPU.
5. İşlemciye termal macun uygulayın ve işlemci soğutucusunu üreticinin talimatlarına göre takın.

3. Bellek (RAM) Kurulumu

1. Dört DDR4 DIMM yuvasını bulun.
2. DIMM yuvasının her iki ucundaki klipsleri açın.
3. DDR4 bellek modülündeki çentiği DIMM yuvasındaki anahtarla hizalayın.
4. Bellek modülünü, klipsler yerine oturana kadar yuvaya sıkıca yerleştirin. Her iki klipsin de tamamen kapalı olduğundan emin olun.

4. Anakart Montajı

1. Install standoffs in the chassis at the locations corresponding to the motherboard's mounting holes.
2. Carefully place the motherboard onto the standoffs, aligning the mounting holes.
3. Anakartı vidalarla sabitleyin, ancak çok fazla sıkmamaya dikkat edin.

5. Çevre Birimlerini Bağlama

• Güç kaynağınızdan gelen 24 pinli ATX güç konektörünü ve 8 pinli CPU güç konektörünü anakartınıza bağlayın.
• Depolama sürücülerinizden gelen SATA veri kablolarını anakart üzerindeki SATA3 portlarına bağlayın.
• Connect front panel connectors (power button, reset button, HDD LED, power LED, USB ports, audio) to their respective headers on the motherboard. Refer to the motherboard's silkscreen labels for correct orientation.
• Install any necessary PCI-Express expansion cards (e.g., graphics card, network card) into the available PCIe slots and secure them.

Kullanım Talimatları

İlk Önyükleme ve BIOS/UEFI Kurulumu

1. After connecting all components and peripherals, connect your monitor, keyboard, and mouse.
2. Güç kablosunu prize takın ve güç kaynağını açın.
3. Kasanın üzerindeki güç düğmesine basın.
4. Güç Açma Kendi Kendini Sınama (POST) işlemi sırasında, aşağıdaki tuşa art arda basın. SİL or F2 key (or as indicated on screen) to enter the BIOS/UEFI setup utility.
5. In the BIOS/UEFI, you can configure boot order, system time, enable/disable integrated peripherals, and set up RAID configurations if desired. Save changes and exit to proceed with operating system installation.

İşletim Sistemi Kurulumu

Insert your operating system installation media (USB drive or DVD) and follow the on-screen prompts to install the OS. Ensure all necessary drivers for the motherboard's chipset, LAN, and other components are installed after the OS is set up. These drivers are typically available on the Supermicro support webalan.

Bakım

Düzenli bakım, anakartınızın ve sisteminizin uzun ömürlü ve istikrarlı çalışmasını sağlamaya yardımcı olur.

• Toz Giderimi: Periodically clean dust from inside your computer chassis using compressed air. Pay special attention to CPU cooler fins, fan blades, and heatsinks on the motherboard. Ensure fans are not spinning when cleaning with compressed air.
• BIOS/UEFI Güncellemeleri: Supermicro'yu kontrol edin website for the latest BIOS/UEFI updates. Updates can improve stability, add new features, or fix bugs. Follow the update instructions carefully to avoid system damage.
• Sürücü Güncellemeleri: Keep your system drivers (chipset, LAN, etc.) updated to ensure compatibility and optimal performance.
• Çevre Kontrolü: Operate the system in a well-ventilated area with stable temperature and humidity to prevent overheating and component degradation.

Sorun giderme

Bu bölümde karşılaşabileceğiniz yaygın sorunlara çözümler sunulmaktadır.

No Power / No Boot

• Güç Bağlantılarını Kontrol Edin: Ensure the 24-pin ATX and 8-pin CPU power connectors are securely seated on the motherboard. Verify the power supply is switched on and connected to a working outlet.
• Ön Panel Bağlantıları: Kasa üzerindeki güç düğmesi kablosunun anakartın ön panel başlığına doğru şekilde bağlı olduğundan emin olun.
• Parça Yeniden Takma: Reseat the CPU, RAM modules, and any expansion cards. Loose connections can prevent the system from booting.
• CMOS'u temizle: If the system powers on but doesn't display anything, try clearing the CMOS. Refer to the motherboard's specific instructions for locating the CMOS clear jumper or button.

Sistem Kararsızlığı / Çökmeleri

• Aşırı Isınma: Ensure CPU cooler and chassis fans are functioning correctly. Check CPU and system temperatures using monitoring software. Clean dust if necessary.
• Bellek Sorunları: Run a memory diagnostic tool (e.g., MemTest86) to check for faulty RAM modules. Try booting with one RAM stick at a time to isolate a potentially bad module.
• Sürücü Çatışmaları: Ensure all drivers are up-to-date and compatible with your operating system. Uninstall recently installed drivers if issues started after an update.

Özellikler

Detailed technical specifications for the Supermicro X11SSH-F-O Motherboard.

Garanti ve Destek

For detailed warranty information, please refer to the warranty card included with your product or visit the official Supermicro website. Supermicro provides technical support and resources for their products.

Supermicro Official Webalan: www.supermicro.com

On the support section of their website, you can find:

• Latest drivers and BIOS/UEFI updates
• Additional documentation and FAQs
• Teknik destek iletişim bilgileri