Philips 7388 20 Watt 6 Volt Halojen Ampul Kullanım Kılavuzu

giriiş

This manual provides essential information for the safe and effective use of your Philips 7388 20 Watt 6 Volt Halogen Bulb. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the product.

The Philips 7388 halogen bulb is designed to produce a comfortable, warm white light, maintaining its luminous efficiency throughout its operational life. It features a G4 socket and is suitable for various lighting applications.

Güvenlik Bilgileri

Her zaman aşağıdaki güvenlik önlemlerine uyun:

• Kapat: Always disconnect power to the fixture before installing, removing, or cleaning the bulb.
• Dikkatli Kullanın: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling.
• Temastan kaçının: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if necessary.
• Doğru Cilttage: Armatürün hacmini kontrol edin.tage, ampulün hacmiyle eşleşir.tage (6 Volts). Using an incorrect voltagAmpule veya armatüre zarar verebilir.
• Uygun Armatür: Use only in fixtures designed for halogen bulbs and with appropriate wattage derecelendirme.
• İmha etmek: Kullanılmış ampulleri yerel yönetmeliklere uygun şekilde atın.

Kurulum ve Yükleme

Doğru kurulum için şu adımları izleyin:

1. Step 1: Power Disconnection
   Ensure the power supply to the lighting fixture is turned off at the circuit breaker or by unplugging the fixture.
2. Step 2: Remove Old Bulb (if applicable)
   If replacing an existing bulb, allow it to cool completely. Gently pull the old G4 bulb straight out from its socket.
3. Step 3: Prepare New Bulb
   Carefully remove the new Philips 7388 bulb from its packaging. Avoid touching the glass envelope with bare hands. If you accidentally touch it, wipe it clean with a lint-free cloth moistened with rubbing alcohol.
4. Step 4: Insert New Bulb
   Align the two pins of the G4 bulb with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
5. Adım 5: Gücü Geri Yükle
   Ampul güvenli bir şekilde takıldıktan sonra armatüre tekrar güç verin.
6. Adım 6: Test
   Doğru çalışıp çalışmadığını doğrulamak için ışık anahtarını açın.

Kullanım Talimatları

The Philips 7388 halogen bulb operates immediately upon receiving power. No special operating procedures are required beyond turning the fixture's power switch on or off.

• Karartma: If used with a compatible dimmer switch, the brightness of the bulb can be adjusted. Ensure the dimmer is rated for halogen or incandescent loads and matches the bulb's voltage ve netage.
• Isı çıkışı: Halogen bulbs produce heat. Ensure adequate ventilation around the fixture to prevent overheating.

Bakım

Minimal maintenance is required for the Philips 7388 halogen bulb.

• Temizlik: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
• Yenisiyle değiştirme: When the bulb reaches the end of its life, replace it following the "Setup and Installation" steps. Always use a bulb with the same specifications (20W, 6V, G4 base) to ensure compatibility and safety.

Sorun giderme

If your Philips 7388 bulb is not functioning as expected, consider the following:

• Ampul yanmıyor:
  • Aydınlatma armatürüne giden güç kaynağının açık olup olmadığını kontrol edin.
  • Ensure the bulb is correctly seated in the G4 socket.
  • Inspect the bulb for any visible damage or a broken filament. If damaged, replace the bulb.
  • Test the fixture with a known working bulb to rule out a fixture issue.
• Ampul Titriyor:
  • Ensure the bulb is fully inserted into the socket.
  • Aydınlatma armatüründe veya kablolarda gevşek bağlantı olup olmadığını kontrol edin.
  • If using a dimmer, ensure it is compatible with halogen bulbs and not overloaded.
• Short Bulb Life:
  • Doğru ses seviyesini doğrulayıntage (6V) is being supplied to the bulb. Overvoltage can significantly reduce bulb life.
  • Ensure the bulb is not being touched with bare hands during installation, as skin oils can cause premature failure.
  • Check for excessive vibration or heat in the fixture, which can shorten bulb life.

Özellikler

Key technical specifications for the Philips 7388 Halogen Bulb:

Garanti ve Destek

For warranty information or technical support regarding your Philips 7388 Halogen Bulb, please refer to the official Philips Lighting webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Satın alma belgenizi saklayın.

Daha fazla bilgi için Philips Mağazasını ziyaret edebilirsiniz: Amazon'da Philips Mağazası