giriiş
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your AIKE Commercial Jet Hand Dryer, Model AK2005H. Please read this manual thoroughly before use and retain it for future reference.
Güvenlik Bilgileri
- Ensure proper grounding and electrical installation by a qualified professional. All wiring must comply with local electrical codes.
- Do not operate the hand dryer with wet hands on the power cord or plug.
- Keep children away from the device during operation.
- Do not cover the air inlets or outlets during operation.
- Herhangi bir bakım veya temizlik yapmadan önce elektrik bağlantısını kesin.
Ürün Özellikleri
- Powerful 1750-2050W commercial jet hand dryer.
- Achieves fast drying in 7-10 seconds.
- Equipped with a built-in two-stage HEPA filter that captures 99.97% of dust and allergens.
- Constructed with an extremely durable, impact-resistant ABS polycarbonate cover.
- Features smart warm wind technology and two options for air velocity.
- Intelligent LED display shows drying time countdown and error codes.
- Includes safety features such as overheat protection, timeout protection, and Smartwarm functionality.
- Designed with dual air outlets for efficient drying.
- Integrated drain tank to collect excess water.
- Features a hidden switch for internal settings.
- Hardwired friendly design for easy electrical connection.
Paket İçeriği
- AIKE Commercial Jet Hand Dryer Unit
- Montaj Plakası
- Installation Hardware (screws, expansion tubes)
- Kullanım Kılavuzu
Kurulum ve Yükleme
Professional installation is recommended for this hardwired unit.
- Montaja Hazırlık: Unscrew the screw at the bottom of the hand dryer unit and carefully remove the mounting plate.
- Mark Positions: Hold the mounting plate against the desired wall location. Use a pencil to mark the positions for drilling holes.
- Matkap Delikleri: Use an appropriate drill bit to make holes at the marked positions. Insert the provided expansion tubes into the drilled holes.
- Güvenli Montaj Plakası: Fix the mounting plate to the wall using the provided screws, ensuring it is level and securely fastened.
- Electrical Connection (Hardwired Friendly): The unit is designed for hardwiring. Access the connector panel (often behind a hidden switch or cover). Connect the Live (L), Neutral (N), and Ground (H) wires from your electrical supply to the corresponding terminals on the hand dryer. Ensure all connections are tight and secure according to local electrical codes.
- Üniteyi Monte Edin: Carefully align the holes on the back of the hand dryer unit with the mounting plate. Hang the machine onto the plate.
- Final Securement: Screw back the bottom screw to fully secure the hand dryer to the mounting plate. The installation is now complete.
Kullanım Talimatları
The AIKE Commercial Jet Hand Dryer is designed for automatic, touch-free operation.
- Ellerinizi yıkayın: Ellerinizi sabun ve suyla iyice yıkayın.
- Activate Dryer: Place your wet hands into the drying chamber. The built-in sensor will automatically detect your hands and activate the high-speed air flow.
- Kuru eller: Move your hands gently up and down within the drying chamber to ensure all surfaces are exposed to the air. The intelligent LED display on top of the unit will show a countdown of the remaining drying time (typically 7-10 seconds).
- Tamamlama: Once your hands are dry, remove them from the chamber. The dryer will automatically shut off.
Bakım
Regular maintenance ensures optimal performance and longevity of your hand dryer.
- Dış Temizlik: Clean the exterior surface of the hand dryer regularly with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the ABS polycarbonate cover.
- Drain Tank Maintenance: The hand dryer is equipped with an internal drain tank to collect excess water. Periodically check the drain tank and empty it to prevent water overflow and maintain hygiene. The drain tank is typically located at the bottom of the unit (refer to Figure 3).
- HEPA Filter Inspection: iki-stage HEPA filter is crucial for air quality. Inspect the filter regularly for dust and debris buildup. Clean or replace the filter as needed to ensure efficient air filtration and drying performance. Access to the filter may be behind the hidden switch panel (refer to Figure 4).
- Sensör Temizleme: Keep the sensor area clean and free from obstructions to ensure proper automatic activation.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Kurutma makinesi açılmıyor | No power supply; Hands not detected by sensor | Check electrical connections and circuit breaker. Ensure hands are placed correctly in the sensor area. |
| Zayıf hava akışı | Air inlets/outlets obstructed; Clogged HEPA filter | Clear any obstructions. Inspect and clean/replace the HEPA filter. |
| Çalışma sırasında olağandışı gürültü | Internal component issue; Loose parts | If persistent, disconnect power and contact AIKE customer support. |
| Error code displayed on LED | System malfunction; Specific error condition | Note the error code and consult AIKE customer support for specific guidance. |
| Water overflowing from unit | Full drain tank | Empty the drain tank. Increase frequency of drain tank checks. |
Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | AK2005H |
| Marka Adı | AIKE |
| Kökeni | Çin anakarası |
| Güç (W) | 1750 |
| Anma Gücü | 1750-2050W |
| Cilttage | AC100-130V / AC220-240V (110/220V) |
| Motor Tipi | Fırça motoru |
| Motor Gücü | 750W |
| Kasa Malzemesi | ABS Plastik |
| Kuruma Süresi | 7-10 saniye |
| Hava Hızı | 90m/s |
| Hava Sıcaklığı | 20-40℃ |
| Başvuru | Hotel, Commercial, Household |
| Boyutlar | 300x220x685mm |
| Net ağırlığı | Yaklaşık 8.5 kg |
| Koruma Sınıfı | Sınıf II |
| Su Geçirmezlik Derecesi | IP24 |
| Sensör | Evet |
| Sertifikasyon | CB, CE, RoHS |
Garanti ve Destek
AIKE provides a 2-year worry-free replacement guarantee for this product. In the event of non-human damage, AIKE will supply new parts and service free of charge.
For any support inquiries, troubleshooting assistance, or warranty claims, please contact AIKE customer service directly.
Kullanıcı İpuçları
- For optimal drying results, shake off excess water from your hands before placing them into the dryer.
- Ensure the sensor area is kept clean and unobstructed to guarantee immediate and consistent activation.
- Regularly check and empty the drain tank to prevent water accumulation and maintain a hygienic environment.
