Aftermarket Products & Services
Start-up & Training
A TPS technician inspects the installation of your equipment and performs onsite adjustments prior to giving hands-on training to operator and maintenance personnel. Start-up and training services may be included with turn-key installation packages.
Instrument Calibration
TPS can provide complete calibration services for your equipment, to include:
- A2LA certifications
- ISO 17025 calibration certification
TPS MAX Program
The TPS MAX Program allows the customer to purchase future service and/or parts without the need to have a purchase order approved and released when parts or service of any kind is needed. These funds are then available to be used on any parts or service items at any time in the future, which will save you and your company valuable down-time. Enrollment also entitles the customer to the many other advantages listed below. Enrollment into the TPS MAX Program can be initiated with a minimum purchase of $5,000.00. Any amount above $5,000.00 will be accepted. Funds do not expire. No overtime charges will be billed for work or travel performed Monday through Friday.
- 10% Off Service Labor (Including: Training, Installation, Preventive Maintenance)
- 10% Off Travel Time
- 10% Off Calibration
- 10% Off Parts
- 10% Off Ground Shipping on Parts
- 10% Off Mileage
Preventive Maintenance
Preventive Maintenance (PM) is a service program in which wear and tear is anticipated. A PM program minimizes premature deterioration of equipment through corrective actions that ensure peak efficiency and performance. TPS technicians will customize a PM program for your equipment that involves a plan of systematic inspection, adjustment, lubrication, and replacement of components, as well as performance testing and analysis. Items that may be included in a PM Program:
- Recertification of temperature uniformity
- Cleaning and adjustment of burners to improve efficiency
- Replacement of parts, or recommendation of replacement of part
Temperature Uniformity
TPS can adjust your equipment for proper airflow balance and heat distribution, providing a tighter temperature tolerance. Consideration is given to air pressure (positive or negative) in your building, which can impact uniformity. In many cases, profile testing and associated adjustments can be completed in a single work day. On-site Profile Testing may include:
- Calibrated and non-calibrated testing
- Moving, parts, and static testing
GAMP Documentation
From the clients URS, TPS offers development and execution of the full range of GAMP documentation including FRS, HDS, SDS, FAT, SAT, and, IQ/OQ.
Relocation
Looking to move your equipment within your facility or to a new location? The experienced TPS aftermarket team is trained to handle your thermal processing equipment relocation from start to finish. This includes disconnection, tear down, transportation, installation, debugging and start-up. With TPS relocation services you can rest assured that your industrial oven, furnace, or test chamber is safely moved to its new location.
Online Parts Store
The TPS online parts store features an extensive inventory of replacement parts.
Visit the parts store for your next order.
store.thermalproductsolutions.com
Installation Supervision
Refurbished Equipment
Rental UnitsRenting equipment can be a cost effective alternative to buying a unit. Rental units are available for quick delivery and for a variety of time frames.
thermalproductsolutions.com/rentalunits
»Blue M »Gruenberg »Lindberg/MPH »Lunaire
»Redline Chambers »Tenney »Wisconsin Oven
www.thermalproductsolutions.com
2821 Old Route 15 | New Columbia, PA 17856 | USA | P: 570-538-7200 | F: 570-538-7380
Documents / Resources
 |
TPS MAX Program Test Chamber Aftermarket Services Web [pdf] User Guide MAX Program Test Chamber Aftermarket Services Web, Program Test Chamber Aftermarket Services Web, Test Chamber Aftermarket Services Web, Chamber Aftermarket Services Web, Aftermarket Services Web, Services Web, Web |