tp-link UH5020C USB Type 5 Port Hub

Product Usage Instructions

• This hub supports Plug and Play. Connect the USB-C connector to your host device.
• Once the hub is connected to your host device, plug your external peripheral devices into the corresponding ports on the hub.
• If you wish to charge your host device using a PD charger:
• Before unplugging the hub from your host device, make sure to remove all external peripherals connected to the hub.

FAQ

• Q: What should I do if the hub is not recognized by my device?
• A: Make sure the hub is securely connected to your host device and that all drivers are up to date. Try using a different USB port on your device.
• Q: Can I use this hub with a smartphone?
• A: The hub is compatible with smartphones that support USB-C connections. Ensure your smartphone’s operating system is supported by the hub.
• Q: Do I need a separate power adapter for the hub?
• A: The hub does not require a separate power adapter for basic functionality. However, if you need to charge your host device using the hub, you may use a PD charger meeting the specifications.

Product Overview

(1) USB-C Connector	For connecting to your host device.
(2) USB-C PD (Power Delivery) Port*	For unidirectionally charging your host device when connected to a PD charger. PD 3.0; Up to 100W * Does not support data transfer.
(3) USB-C Port	USB 3.0; Up to 5 Gbps data transfer
(4) HDMI Port	Up to 4K@60Hz (backward compatible)
(5) USB-A Ports ×2	USB 3.0; Up to 5 Gbps data transfer

Note: The ports’ actual performance may vary based on your host device specifications.

Input	PD: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A USB-C Connector: 5V/3A
Supported Systems	Windows, iOS, macOS, iPadOS, Nintendo OS, Chrome OS, Linux, Android.
Plug and Play	USB-C PD port, USB-C port, HDMI port, USB-A ports.

Using the Hub

This hub supports the Plug and Play feature. Plug the USB-C connector into your host device, then plug in your external peripheral into the corresponding port of the hub.

Note: A PD charger (not included) is not required. If you wish to use a PD charger to charge your host device, please refer to Tips (2B).

Tips

1. When not in use, please unplug or remove the external peripherals from the hub first, and then unplug the hub from your host device.
2. If you need to connect a PD charger to the hub’s USB-C PD port, please:
   • A) Notice that it only has the charging function and is input only.
   • B) Use an original or certified PD charger to charge your host device. The output of the PD charger should meet the input specifications of the USB-C PD port.

CE Mark Warning

• This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
• The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress, and HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

• TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/30/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
• The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/
• TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016.
• The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

Safety Information

• When the product has a power button, the power button is one of the ways to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Keep the device away from water, fire, humidity, or hot environments.
• This equipment can be powered only by pieces of equipment that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.

Operating Temperature: 0°C~40°C (32°F~104°F), Storage Temperature: -40°C~60°C (-40°F ~140°F)

FCC Statement

FCC Compliance Information Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
We, TP-Link Systems Inc., have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Industry Canada Statement

Type designation (Type): UH520C
Ｕnit	Restricted substances and their chemical symbols
	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent chromium (Cr+6)	Polybrominated biphenyls (PBB)	Polybrominated diphenyl ethers (PBDE)
PCB	○ ○ − −	○ ○ ○ ○	○ ○ ○ ○	○ ○ ○ ○	○ ○ ○ ○	○ ○ ○ ○
Note 1： “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of the presence condition. Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

Explanation of the symbols on the product label
Symbols may vary from product.
Note: The product label can be on the product and its I.T.E. power supply.

CONTACT

• Product Name: USB Type-C 5-Port Hub
• Model Number: UH5020C
• Responsible party:
• TP-Link Systems Inc.
• Address: 10 Mauchly, Irvine, CA 92618
• Website: http://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail: sales.usa@tp-link.com

Documents / Resources

tp-link UH5020C USB Type 5 Port Hub [pdf] User Guide UH5020C USB Type 5 Port Hub, UH5020C, USB Type 5 Port Hub, Type 5 Port Hub, Port Hub, Hub

References

• User Manual