tp-link UE300C USB to Ethernet Network Adapter User Guide

Installation
This adapter supports Plug and Play feature. Simply plug the adapter into a USB port and wait for a few seconds for it to be ready to use.

Driver Installation
Depending on the model and operating system, follow these steps to install the required drivers:

UE300C: Download and install the driver from the official website for Windows 7/8/8.1 and Mac OS X 10.8.
UE330, UE200: Click to install the driver if prompted for Windows 7/8/8.1. For Mac OS X 10.8, download and install the driver from the website.

UE306, UE300: Download and install the driver from the official website for Windows 7/8 and Mac OS.

FAQ
Q: How do I know if the adapter is properly connected?
A: Check the white LED indicator; if it is on, the adapter is properly connected and ready to use.

User Guide
USB to Ethernet Network Adapter
©2024 TP-Link 1910013818 REV1.0.0

ATTENTION

When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

Keep the device away from water, fire, humidity or hot environments.
This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source(LPS) defined in the standard of IEC 62368-1. Recycling

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/

For technical support, replacement services, the user guide and more information, please visit https://www.tp-link.com/support, or simply scan the QR code.

Using the Adapter

This adapter supports Plug and Play feature. Plug in and wait for seconds. Then this adapter is ready to use.

UE300C

For Windows 7/8/8.1, Mac OS X 10.8 and older version, please download and install a driver from our official website www.tp-link.com, and search the model number. UE330 and UE200:
For Windows 7/8/8.1, please click to install a driver if prompted to do so. For Windows 7, please click CANCEL if prompted “The program might not have installed correctly” after installation.
For Mac OS X 10.8 and older version, please download and install a driver from our official website www.tp-link.com, and search the model number.

UE306 and UE300

For Windows 7/8 and Mac OS, please download and install a driver from our official website www.tp-link.com, and search the model number.
* Works with Nintendo Switch (Supported by UE306 ONLY)
wired network

LED Explanation

LED (for UE330)	Status	Indication
White	On	The adapter is properly connected and hub is ready to use
Yellow	On	The Ethernet cable is properly connected
Green	Flashing	Network data is being transferred

LED (for UE300C, UE300, UE200, UE306)

White	On	Both the adapter and Ethernet cable are properly connected
White	Flashing	Network data is being transferred

FCC Compliance Information Statement

Product Name: USB 3.0 to Gigabit Ethernet Network Adapter
Model Number: UE300
Responsible party:
TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234

Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Operating Temperature: 0°C~40°C (32°F~104°F), Storage Temperature: -40°C~60°C (-40°F ~140°F)

Explanation of the symbols on the product label

Symbols may vary from products.
Note: The product label can be on the product and its I.T.E. power supply.

Documents / Resources

tp-link UE300C USB to Ethernet Network Adapter [pdf] User Guide
UE300C USB to Ethernet Network Adapter, UE300C, USB to Ethernet Network Adapter, Ethernet Network Adapter, Network Adapter, Adapter

References

User Manual

tp-link UE300C USB to Ethernet Network Adapter

Product Usage Instructions