tp-link RV30 Robot Vacuum and Mop
Product Information
- Model: Tapo RV30 Max Plus
- Suction Power: 5300Pa
- Navigation System: LiDAR + IMU Dual Navigation System
- Dust Bin Capacity: 3L
- Noise Level: 52 dB
- Battery Life: Up to 150 minutes
- Hurdle Capacity: Up to 22 mm / 0.87 in
- Cleaning Modes: Multi-Floor Cleaning
Product Usage Instructions
- Setup and Preparation:
Before using your Tapo RV30 Max Plus Robot Vacuum and Mop, ensure the device is fully charged and the dustbin is empty. - Smart Cleaning Features:
Utilize the Tapo IQ+ Smart CleaningTM to tailor your cleaning routine, set up daily cleaning schedules, and customize cleaning preferences for different rooms. - Maintenance:
Follow the maintenance guidelines provided in the user manual to ensure optimal performance of the robot vacuum. Regularly clean or replace parts as recommended. - Mapping & Navigation:
Take advantage of the LiDAR + IMU Dual Navigation System for accurate mapping of your house, efficient cleaning routes, and obstacle avoidance features. - Voice & Remote Control:
You can control the robot vacuum using voice commands through smart speakers or remotely via the Tapo app for added convenience.
FAQs
Q: How often should I replace the dust bag?
A: The dust bag should be replaced every 3-6 months or when it is full, depending on usage.
Q: Can the robot vacuum navigate different floor types?
A: Yes, the Multi-Floor Cleaning feature allows the device to recognize and adapt to different floor surfaces without manual intervention.
Q: How long does the battery last on a single charge?
A: The high-performance battery provides up to 150 minutes of continuous cleaning, allowing for thorough cleaning in one run.
DeepVac™ for Better Dust Removal
- LiDAR + IMU
Dual Navigation System - Self-Emptying with 95% Debris Removal†
- 2 Months Hands-Free with 3L Dust Bag
- 52 dB Quiet Clean†
Highlights
Tapo IQ+ Smart Cleaning™
Tailor Your Cleaning Routine
- Abundant Cleaning Options
Set the water volume, suction power, and number of cleanings for every room. - Customizable Carpet Preferences
Optimize your mopping and navigation preferences to either avoid carpets or clean them efficiently. - Precise Scheduling
Set daily cleaning schedules to fit your preferred routine.
Dust-Free, Stress-Free
- Better Dust Removal Efficiency
Deep Vac™ tech allows smoother dust flow to enhance dust removal efficiency on various floors. - No Spots Missed
Employs Mesh Grid™ to conduct more comprehensive and deeper cleaning, effectively avoiding missed spots. - LiDAR + IMU Dual Navigation System
Accurately maps out your house in minutes, avoids omissions and repeated cleaning, and even works well in the dark. - 5300Pa Powerful Suction
Sweeps away debris sandwiched between gaps and dust hidden in carpets for a deeper, powerful clean. - Up to 2-Month Hands-Free with 3L Dust Bag
Automatically empties the dustbin with 95% debris removal to keep your hands free for up to 2 months. † - 52 dB Quiet Clean†
Lower noise level to 52 dB – quieter than a running microwave, ensuring a hushed cleaning experience. - Up to 150 min Continuous Cleaning†
The high-performance battery provides up to 150 minutes of continuous cleaning to clean your house in one run. - Up to 22 mm / 0.87 in Super Hurdle Capacity
Effortlessly climbs over thresholds and obstacles under 22 mm / 0.87 in to provide a more thorough cleaning experience. - Up to 4 Multi-Floor Cleaning
Accurately recognizes different floors faster with local-stored maps without the need for a manual switch. - Voice & Remote Control
Simply send voice commands via smart speakers or control via the Tapo app.
Specifications
Care and Maintenance
To maintain optimal performance, maintain the robot vacuum according to the following guidelines.
Part |
Maintenance Frequency |
Replacement Frequency* |
Dustbin | Clean/wash as needed | / |
Filter | Once a week | 3-6 months |
Main Brush | Every 2 weeks | 6-12 months |
Main Brush Cover | Every 2 weeks | 6-12 months |
Side Brush | Once a month | 3-6 months |
Dust Bag | / | Replace when full |
Mop Cloth | After each use | 2-3 months |
Caster Wheel | Clean as needed | / |
Main Wheels | Once a month | / |
Sensors | Once a month | / |
Charging Contacts | Once a month | / |
Replacement frequency may vary depending on the actual situation. Parts should be replaced if visible wear appears.
- Mapping & Navigation Features
- Mapping/Path Planning: LiDAR + IMU Dual Navigation
- High-Precision Map: Yes
- Obstacle Avoidance: LiDAR
- Barrier-Cross Height: 22 mm/0.87 in
- Anti-Drop Protection: Yes
- Dock Features
- Auto Dust Collection: Yes
- Suction Power of Auto-Empty Dock: 17000 Pa
- Dust Bag Capacity: 3 L
- Vacuuming Features
- Max Suction Power: 5300 Pa
- Suction Level Adjustment: 5 levels
- Dustbin Capacity: 300 ml
- Dustbin Detection: Yes
- HEPA Filter: H11
- Carpet Boost: Yes
- Noise: 52dB (Quiet mode), 55 dB (Default/Standard)
- Mopping Features
- Wet Mopping: Yes
- Mopping Type: Electric Water Flow Control
- Water Level Adjustment: 3 levels
- Water Tank Capacity: 300 ml
- Battery
- Battery Capacity: 2600 mAh
- Vacuum Max Battery Life: 150 min per charge (Quiet Mode)
- Recharge & Resume: Yes
- App Features
- Real-Time Tracking: Yes
- Multi-Floor Mapping: Yes
- Scheduled Cleaning: Yes
- Virtual Walls: Yes
- No-Go Zones: Yes
- Zone Cleaning: Yes
- Physical
- Product Dimensions:
- Robot Vacuum: Φ330 × 100 mm (Φ13 × 3.9 in)
- Auto-Empty Dock: 228 × 164 × 330 mm (9 × 6.5 × 13 in)
- Product Dimensions:
Package Contents
- Robot Vacuum Cleaner ×1 (Includes HEPA Filter x1and Side Brush x1)
- Auto-Empty Dock ×1(Includes 3L Disposable Dust Bag ×1and Cleaning Brush ×1) Mopping Attachment ×1
- Power Cable ×1
- User Manual
Others Information
- Wireless Connection:
IEEE 802.11 b/g/n, 2.4 GHz band only; Bluetooth 4.2 (only for onboarding) - Rated Input Voltage: 100-120 VAC, 50/60 Hz (JP/US version), or 220-240 VAC, 50/60 Hz
- Max Charging Power Consumption: 10 W (DC20 V 500 mA)
- Max Working Power Consumption:
- Robot Vacuum: 45 W
- Auto-Empty Dock: 650 W
- Works with Google Home: Yes
- Works with Amazon Alexa: Yes
Overview
Robot Vacuum
Power/Clean
- Press and hold for 3 seconds: Turn on/off the robot vacuum.
- Press once: Start/pause cleaning.
Dock
- Return to the dock to charge.
- Empty the dustbin when docked.
Spot Cleaning/Child Lock
- Press once: Start spot cleaning.
- Press and hold for 5 seconds: Turn on/off the child lock.
Combo Button
- Press and hold simultaneously for 5 seconds: Enter setup mode to configure the network.
- Press and hold simultaneously for 10 seconds: Restore to factory default settings.
LED
- Red: Battery level < 20%; Error
- Orange: Battery level between 20% and 80%
- Green: Battery level > 80%
- Do NOT add any cleaning agents.
- Wipe the water tank dry after adding water.
Auto-Empty Dock
For support and warranty, please visit: https://www.tapo.com/support
- Based on internal testing by Tapo Lab. Actual results are subject to change due to the usage and environmental factors.
- Testing is conducted by Tapo Lab using Tapo RV30 Max Plus compared to Tapo RV30 Plus on rough wood floors. Actual results may vary according to the home environment.
Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their respective holders.
@2024 TP-Link
Documents / Resources
![]() |
tp-link RV30 Robot Vacuum and Mop [pdf] Instruction Manual RV30 Robot Vacuum and Mop, RV30, Robot Vacuum and Mop, Vacuum and Mop, Mop |