tp-link Router Gateway OC
Specifications
- Product Name: Router/Gateway/OC
- Installation Types: Desktop, Rack, Pole, Wall Mounting
- Power Options: Power Cord/Adapter, Standard PoE Device, USB Power Source
Images may differ from actual products.
Installation
Desktop Installation
Rack Installation (Only for Certain Models) 
Pole Mounting (Only for Certain Models) 
Wall Mounting (Only for Certain Models) 
Installation
Refer to the installation section at the beginning of the guide to install the device.
Typical Network Topology
Note: For Hardwre controller, a DHCP server (typically a router/gateway) with DHCP function enabled is required to assign IP addresses to the EAPs and the Hardware Controller in your local network. 
Power On
Via Power Cord/Power Adapter
Connect your device to the power source via the power cord/power adapter. 
Via Standard PoE Device (If Supported)
Connect an Ethernet cable from the ETH1 (PoE IN) port of your device to a standard 802.3af or 802.3at or 802.3bt PoE device, such as a TP-Link PoE switch.
Via USB Power Source (If Supported)
Connect a USB cable (not provided) from the micro USB port of your device to the USB power source. 
Configuration
The device can be configured and monitored centrally via a controller. For details, refer to the manual for the relevant product, and controller. You can get the controller from https://www.omadanetworks.com or contact the sales staff.
Safety Information
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use a damaged charger or USB cable to charge the device. (For products powered by adapters)
- Do not use any other chargers than those recommended. (For products powered by adapters)
- The adapter shall be installed near the equipment and shall be easily accessible. (For products powered by adapters)
- Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid. (For outdoor products)
- Keep the device away from water, fire, humidity or hot environments. (For indoor products)
- Do not use the device where wireless devices are not allowed. (For wireless products)
- The socket outlet shall be installed near the equipment and shall be easily accessible. (For products powered by a power cord)
- Place the device with its bottom surface downward. (For desktop products)
- Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
For wired product:
Class A and Class B powered by PoE / Micro USB: TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
Class B
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
For a wireless product
Class A
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives (EU)2015/863, 2014/53/EU and 2011/65/EU. The original EU declaration of conformity may be found at https://www.tp-link.com/support/ce.
Class B
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives (EU)2015/863, 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at https://www.tp-link.com/support/ce.
For technical support, the user guide, and other information, please visit https://support.omadanetworks.com/or simply scan the QR code.
FAQs
Q: What is the typical network topology for this device?
A: A DHCP server with the DHCP function enabled is required for assigning IP addresses to EAPs and the Hardware Controller in the local network.
Q: Where can I find more information about configuration and setup?
A: Refer to the manual for detailed instructions or visit https://support.omadanetworks.com for additional resources.
Documents / Resources
 |
tp-link Router Gateway OC [pdf] Installation Guide Router Gateway OC, Gateway OC, OC |