TP-Link C310 Security Camera
This manual section covers key regulatory compliance statements and essential safety guidance for TP-Link Omada security camera models, including FCC/CE/UKCA/Canadian compliance and operating/safety requirements.
Specifications (From Source)
| Product name | Security Camera |
|---|---|
| Model numbers | Omada 8MP Bullet; Omada 8MP Turret; Omada 5MP Bullet; Omada 5MP Turret; Omada 12MP Bullet; Omada 12MP Turret |
| FCC compliance | Class B digital device (part 15) |
| Operating temperature | -30℃ to 60℃ |
| ErP (Networked standby power, all wired network ports connected) | 8MP Bullet: 2.7 W; 8MP Turret: 2.7 W; 5MP Bullet: 2.3 W; 5MP Turret: 2.2 W; 12MP Bullet: 5.3 W; 12MP Turret: 5.4 W |
| Recommended power adapters (EU regions) | Omada 8MP Bullet/Turret/T120100-2C1 (TP-Link); Omada 5MP Bullet/Turret/T120100-2C1 (TP-Link); Omada 12MP Bullet/Turret/T120150-2C1 (TP-Link) |
Quick Setup & Use (Safety-Grounded)
- Use only the original power supply or a power source type specified for the product.
- Before cleaning, unplug the power cable; avoid liquids/aerosol cleaners and do not use a wet cloth.
- Do not submerge the product in water or any other liquid.
- Ensure ventilation openings are not blocked or covered to prevent overheating.
- Power the device using a supply that complies with IEC 62368-1 Power Source Class 2 (PS2) or Limited Power Source (LPS) for PoE cameras.
- Use the included/approved power adapter; do not use a damaged adapter or USB cable.
- For indoor/outdoor placement: keep the device away from water/fire/humidity/hot environments; for outdoor cameras, do not immerse in water.
- Operate within the stated operating temperature range: -30℃ to 60℃.
- Please use the original power supply or use this product only according to the power source type specified on the product.
- Before cleaning this product, please unplug the power cable. Do not use liquids, aerosol cleaners, or wet cloths for cleaning.
- Do not submerge this product in water or any other liquid.
- Slots and openings are provided for ventilation to ensure reliable operation of the product and prevent overheating. Do not block or cover these openings.
- Do not place this product near heat sources. It should not be placed in an enclosed space unless there is proper ventilation.
- Do not open the casing or attempt to repair the product yourself; if the product malfunctions, please contact the manufacturer or your local distributor.
- The power adapter should be used indoors where the ambient temperature is 40°C or below.
Features
Motion Detection and Notifications
Receive instant notifications and check feeds when motion is detected. This helps you protect your home day and night.
3MP Ultra-High Definition
With 3MP high resolution, Tapo C310 delivers vivid images, helping identification and recognition from fay away
IP66 Weatherproof
The Tapo C310 is well-suited even in harsh environments with rain and dust.
Sharp Night Vision
Provides a visual distance of up to 98 ft (30 m) even in total darkness to always keep tou safe.
Safety Information
- Keep the device away from water, fire, humidity, or hot environments (for indoor cameras).
- Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid (for outdoor cameras).
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- This product can be powered only by power supplies that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) of IEC 62368-1 (for PoE cameras).
- Do not use a damaged power adapter or USB cable to charge the device.
- Do not use any power adapters other than those recommended.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Use only power supplies that are provided by the manufacturer and in the original packaging of this product. If you have any questions, please contact us.
- Operating Temperature: -30℃ to 60℃
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanations of the Symbols on the Product LabelNote: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary by product.
| Symbol | Explanation |
|---|---|
| [Symbol 1] | Class II equipment |
| [Symbol 2] | Class II equipment with functional earthing |
| [Symbol 3] | Alternating current |
| [Symbol 4] | Direct current |
| [Symbol 5] | Polarity of d.c. power connector |
| [Symbol 6] | For indoor use only |
| [Symbol 7] | Dangerous voltage |
| [Symbol 8] | Caution, risk of electric shock |
| [Symbol 9] | Energy efficiency marking |
| [Symbol 10] | Protective earth |
| [Symbol 11] | Earth |
| [Symbol 12] | Frame or chassis |
| [Symbol 13] | Functional earthing |
| [Symbol 14] | Caution, hot surface |
| [Symbol 15] | Caution |
| [Symbol 16] | Operator’s manual |
| [Symbol 17] | Stand-by |
| [Symbol 18] | “ON”/”OFF” (push-push) |
| [Symbol 19] | Fuse |
| [Symbol 20] | Fuse is used in neutral N |
| [WEEE Symbol] | RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. The user has the choice to give his product to a competent recycling organization or to the retailer when buying a new electrical or electronic equipment. |
| [Volume Symbol] | Caution, avoid listening at high volume levels for long periods |
| [Disconnect Symbol] | Disconnection, all power plugs |
| m | Switch of mini-gap construction |
| μ | Switch of micro-gap construction (for US version). Switch of micro-gap / micro-disconnection construction (for other versions except US) |
| ε | Switch without contact gap (Semiconductor switching device) |
| Product Model | Power Model | Manufacturer |
|---|---|---|
| Omada 8MP Bullet | T120100-2C1 | TP-Link |
| Omada 8MP Turret | T120100-2C1 | TP-Link |
| Omada 5MP Bullet | T120100-2C1 | TP-Link |
| Omada 5MP Turret | T120100-2C1 | TP-Link |
| Omada 12MP Bullet | T120150-2C1 | TP-Link |
| Omada 12MP Turret | T120150-2C1 | TP-Link |
- For Omada 8MP Bullet: Power consumption in networked standby when all wired network ports are connected: 2.7 W
- For Omada 8MP Turret: Power consumption in networked standby when all wired network ports are connected: 2.7 W
- For Omada 5MP Bullet: Power consumption in networked standby when all wired network ports are connected: 2.3 W
- For Omada 5MP Turret: Power consumption in networked standby when all wired network ports are connected: 2.2 W
- For Omada 12MP Bullet: Power consumption in networked standby when all wired network ports are connected: 5.3 W
- For Omada 12MP Turret: Power consumption in networked standby when all wired network ports are connected: 5.4 W
Troubleshooting
- If the product malfunctions or needs service, do not open the casing or attempt repairs yourself—contact the manufacturer or local distributor.
- For FCC-related interference concerns (radio/TV reception), try: reorient/relocate the receiving antenna, increase separation from the receiver, connect to a different circuit outlet, or consult a dealer/experienced radio/TV technician.
- If you notice overheating risk, ensure ventilation openings are not blocked/covered and avoid placing the device near heat sources or in enclosed spaces without proper ventilation.
- If power issues occur, do not use a damaged power adapter or cable; use only manufacturer-provided power supplies in the original packaging and ensure the adapter is installed near the equipment and is easily accessible.
Documents / Resources
 | C310 Security Camera |
References
- Link: The wallet for the AI economylink.com
- tp-link.com/www.tp-link.com
- tp-link.com/en/support/ce/www.tp-link.com
- Regulatory Compliance | TP-Linkwww.tp-link.com
- tp-link.com/us/www.tp-link.com
- User Manualmanual.tools
Published: July 18, 2026
Updated: July 20, 2026