TOZO S2 Smart Watch User Manual
TOZO S2 Smart Watch

Introduction

  • Front Side
    Product Overview
  • Back Side
    Product Overview
  1. Open the package and check the product.
  2. Package contents: (1) TOZO S2 Smartwatch (with built-in lithium battery);(2) User guide; (3) Charging cable.
  3. Connect the contact points of the magnetic charging cable to the contact points of the watch to charge and activate the device, and to turn it on.
  4. Search for “TOZO FIT” in your mobile app store and download, or scan the QR code(on the Right) to install the app.
    QR Code Icon
  5. Open the app, tap the “More” icon in the upper right corner, select “Add Device”, select the device category, and select the device you wish to link in the corresponding search list. You may also link the device directly by scanning the device’s QR code using the scan function.

Health

App

  1. Start “TOZO FIT”, enable the Bluetooth feature, and grant the GPS positioning permission;
  2. Light up the bracelet screen and bring it close to your phone;
  3. Click “Bind Device” on the App, and select the bracelet model in the search results to bind;
  4. Confirm the binding request on the bracelet; 5.Fill in your information and set your step goal on the App to complete the binding.

Watch

  1. Record your data, measure your heart rate, Sp02 and stress test. Monitor your heart rate and sleep day and night.
  2. Start an exercise
  3. Start the sports App on the bracelet, click the Icon of sports type and the the goal to exercise.

Basic Operations

  1. Wear it correctly: make sure that the bottom sensor is properly attached to the skin, and the strap shall be one finger away from the wrist.
  2. Touch operation: TOZO S2 supports full-screen touch operations. Single click: select long press: enter or confirm.
  3. Touch key: TOZO S2 has a touch key. Short press: return or close a notification.
    Basic Operations

Function Description

Dial

You can switch between different dials in the “Dial Settings”. And you can download and install more dials in the “Dial Market”.

Sports

14 Sports modes are provided:

Outdoor run Indoor run\Outdoor walk Indoorwalk1Fliking \ Outdoor cycle\Indoor cycle\ Cricket Wool swim\ Open water swiml Yoga \ Rower\ Ellipticall Workout You can choose to show or hide any sports mode in “TOZO FIT” has the Intelligent Sports Detection function, and can detect if the user is running or walking; this function can be enabled or disabled in the App. The Sports Summary of TOZO S2 contains a variety of sports data, and the details can be viewed In the “TOZO FIT”.
Sports

Apps

Swipe up or down to select an icon. The icons include: Message, Health Data, Workout Heart Rate, Stress, Sp02, Sleep, Relax, Music, Time, and Settings.
Apps

Alexa

TOZO FIT APP-Alexa

  1. App can click the amazon alexa area to enter the login tutorial interface.
  2. Jump to the Amazon dedicated alexa account login interface for account binding authorization:
    TOZO FIT APP-Alexa
  3. After binding authorization, you can view part of the operation introduction and set different national languages;
  4. Click the log out button to log out of Alexa, you can log in again at any time.
    TOZO FIT APP-Alexa

The watch-alexa
watch-alexa

  1. The watch is Alexa-enabled. On Listening interface, if you ask a question or say a voice command, it turns to Thinking interface and returns an answer or executes the command. Currently via Alexa you can turn on the stopwatch, alarm clock, countdown, event reminder services on the watch.
  2. A corresponding prompt is displayed In case the request is timed out, the voice Is not recognized, the account is not logged In, the network connection Is unstable, or the Bluetooth is not connected.

Health Data

It supports viewing the daily accomplishment of the following info: Steps, Calories, Distance and Activity.
Health Data

Heart Rate

  1. It supports measuring your heart rate any time or viewing the daily monitoring data. Also, you can set the measurement frequency in the App settings;
    Heart Rate
  2. After you start the heart rate measurement App, you should keep your arms and wrists still during the measurement.

Stress

After you start the stress measurement App, you should keep your arms and wrists still during the measurement.
Stress

Sp02

After you start the Sp02 measurement App, you should keep your arms and wrists still during the measurement.
Sp02

Sleep

You can view the most recent sleep record and sleep status at each stage.
Sleep

Relax

  1. Enter the Relax App and choose the duration;
  2. Click to start, then follow the vibration frequency and animation instructions to adjust your breathing and it will help you relax.

Stopwatch

Stopwatch
stopwatch and a timer are provided.

Alarm
Alarm

  1. The watch can be set to add, delete, turn on/off the alarm; you can also set the alarm to the watch through the APP; you can also set the label you need in the alarm to identify the alarm
  2. You can set the alarm delay time and times in the APP to decide how long you want to delay and how many times to delay.

Timer

You can set a timer with a preset duration on the watch, and the timer will remind you when the timer expires; you can customize the timer time.
Timer

Weather

Supports three-day weather viewing, you can view today’s ‘current weather, highest and lowest weather values” and the “highest and lowest weather values” for the next two days.
Weather

Music

  1. When the watch is connected to the APP, you can control the mobile music player to perform the functions of “next, previous”, “play\ pause’ and “volume increase and decrease”.
  2. This function can be displayed\ hide in the APP settings.
    Music

Exercise Record

You can view your recent exercise records on the watch, including detailed data about your exercise; you can also view the exercise records on the APR
Exercise Record

Fine Phone

  1. When the watch is connected to the App, you can make your phone ring.
  2. Click the icon to end the ringing.
  3. This function can be displayed\hide in the APP settings.
    Fine Phone

Settings

  1. You can set your wrist-lifting screen, real-time heart rate, and do not disturb switch on the watch This function can be displayed\ hide in the APP settings.
  2. You can switch the locally stored watch face on the watch.
  3. You can set the brightness of the watch and the length of time the screen is on on the watch; you can set the switch to reduce the brightness at night.
  4. You can control the shutdown, restart, and factory settings of the watch on the watch (after restoring the factory settings, all data in the watch will be cleared and the binding relationship with the phone will be released).
    Settings

Message

The watch supports multiple reminder modes, including message reminder, incoming call reminder, walking reminder, drinking reminder, exercise goal reminder, exercise center rate warning reminder, etc.
Message
Message

Icons
Thank you for purchasing the TOZO authentic product.
For more latest products, parts and accessories,
please visit: www.tozostore.com
For any assistance please contact Email: [email protected]

Company Logo

 

Documents / Resources

TOZO S2 Smart Watch [pdf] User Manual
S2, 2A3N3-S2, 2A3N3S2, S2 Smart Watch, Smart Watch

Leave a comment

Your email address will not be published.