INSTALLATION INSTRUCTIONS
TOUCHÉ LIGHTING CONTROLS

SMART OCCUPANCY SENSOR
PART # SMAOS-L/H

FRONT OF OCCUPANCY SENSOR

BACK OF OCCUPANCY SENSOR

NOTE: LABELED INPUT AND OUTPUT PORTS ARE FOR CABLE IDENTIFICATION ONLY – PORTS ARE ELECTRICALLY IDENTICAL & CAN BE INTERCHANGED.

RECESSED MOUNTING

4 SQUARE WITH MUD RING MOUNTING

SYMBOLS AS SHOWN
ON SUBMITTAL AND
CONSTRUCTION
DOCUMENTS

NOTES

1. PIR FRESNEL LENS AND LED INDICATOR (SEE CONNECTIVITY PAGE FOR LED INDICATION)
2. SMART PORTS – MINIMUM CAT 5 CABLE – DO NOT CONNECT TO BRANCH PORTS
3. 3-1/2″ DIAMETER OPENING. 3-5/8″ HOLE SAW FOR 3″ CONDUIT IS ALLOWED
4. MOUNTING SPRINGS
5. STANDARD 4 SQUARE BOX
6. CIRCLE MUD RING FOR 4 SQUARE BOX
7. HEXAGONAL ELECTRICAL BOX
8. SNAP RING REQUIRED FOR MOUNTING TO HEXAGONAL ELECTRICAL BOX (SOLD SEPARATELY)

HEXAGONAL ELECTRICAL BOX MOUNTING

SMART OCCUPANCY SENSOR CONNECTIVITY

CABLE TYPES
LINE ID	DESCRIPTION	TYPE	NOTES
	SMART	CAT 5 (MIN)	TOTAL SMARTNET LENGTH NOT TO EXCEED 400′

LED INDICATION
LED COLOR	DESCRIPTION	SENSES OCCUPANCY	RECOMMENDATION(S)
	BLUE	INDICATION MEANING	NONE
	GREEN	SENSOR IS FORCED VACANT	NONE
BLINK	BLINKING GREEN	SENSOR HAS POWER BUT  IS NOT COMMUNICATING WITH  CONTROLLER	CHECK PATCH CABLE
	RED	CONNECTED TO BRANCH PORT	CONNECT TO SMARTNET
	OFF	NO POWER	CHECK PATCH CABLE

Touché Lighting Controls (a Product of ESI Ventures)
A: 2085 Humphrey Street, Fort Wayne, IN 46803
W: ToucheControls.com

Documents / Resources

Touch SMAOS-L Smart Occupancy Sensor [pdf] Instruction Manual SMAOS-L Smart Occupancy Sensor, SMAOS-L, Smart Occupancy Sensor, Occupancy Sensor, Sensor

References

• User Manual