TOUCARE CIEL T10S Multifunctional Bluetooth Helmet Intercom
Product Usage Instructions
Installation:
Before starting the installation process, ensure that the product is placed in a suitable location with proper ventilation.
Powering On:
Connect the power source to the device and press the power button to turn it on. Wait for the device to boot up completely before use.
Functionality:
Utilize the control panel or remote (if applicable) to navigate through the different functions and settings of the product.
Maintenance:
Regularly clean the product using a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals that may damage the device.
FAQ
Q: What should I do if the device does not power on?
A: Check the power source and connections to ensure they are secure. If the issue persists, contact customer support for further assistance.
Q: How often should I clean the product?
A: It is recommended to clean the product every few weeks to prevent dust buildup and maintain optimal performance.
PRODUCT OVERVIEW
INSTALL
METHOD NO. 1: USE DOUBLE-SIDED TAPE TO ATTACH TO THE HELMET, THEN HANG THE “CIEL TIOS” ON THE BACK CLIP
METHOD NO. 2: CLAMP THE BACK CLIP TO YOUR HELMET, THEN HANG THE “CIELTIOS” ON THE BACK CLIP
BASIC OPERATION
- Power on/Power off
- Pairing with phone
When the “CIEL T1OS” is power off
- Reconnect the phone
- Turn up the volume
- Turn down the volume
PHONE OPERATION
- Answer the call
= 8s automatic answer
- Reject the call =
- End the call =
- Redial=
- Answer third call while talking
- Voice dial =
- Check T10 battery capacity
- Switch auto answer setting
MUSIC CONTROL
- Music Play/Music Pause =
- Next song =
- Last song
TWO T10 MUSIC SHARING,DOUBLE PRESS THE DOWN BUTTON OF TWO T10, THEY WILL CONNECT AND LISTEN TO THE SAME SONG
- Music sharing
- Disconnect music sharing
FM RADIO
- FM on/off
- Up/down searching
UNIVERSAL BLUETOOTH
- Universal pairing(when power on)
- Search universal devise
- Start universal talk when pairing successful
- End universal talk
BLUETOOTH INTERCOM
(4 riders)
Four T10 Bluetooth intercom.
- Intercom No.1, No.2, No.3, No.4 to search
- No.1 or No.2 or No3 or No.4 Wait some times, until pair end
- Start bluetooth intercom (No.1 or No.2 or No3 or No.4)
- End bluetooth intercom
- Clear the pairing memory
TIPS
WHEN BATTERY LEVEL VERY LOW,HEADSET WILL MAKE A WARNING EVERY 5 MINUTES.
TECHNICAL SPECIFICATIONS
BLUETOOTH 5.1
- WORKING HOURS: 10 HOURS
- STANDBY TIME: 260 HOURS
- CHARGING TIME: 3 HOURS
- SUPPORT HSP. HFP. A2DP• AVRCP. AGHSP
- BATTERY: LITHIUM BATTERY 520MAH,3.7V
FCC
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Documents / Resources
 |
TOUCARE CIEL T10S Multifunctional Bluetooth Helmet Intercom [pdf] User Manual 2AQN2-CIEL-T10S, 2AQN2CIELT10S, CIEL T10S Multifunctional Bluetooth Helmet Intercom, CIEL T10S, Multifunctional Bluetooth Helmet Intercom, Bluetooth Helmet Intercom, Helmet Intercom, Intercom |