ToSee Security Home Screen Click on The Smart Icon User Guide
Installation Instructions
- From the home screen click on the Smart icon at the bottom of the menu
- Press on Automation
- Press on “When Device Staus Changes”
- Choose the device, for example “Door Sensor”
- Select “Status”
- Select “Open” (if PIR select Motion Sensor and then Alarm)
- Select “Run Device”
- Select device (for Alarm Kit, choose Siren)
- Select “Alarm Period”
- Adjust how long you wish to have the Siren sound for by pressing the + button and save
- Select “Alarm Switch”
- Choose the action, (e.g when door sensor opened turn on Siren.) and press save
- Click “next”
- Completed, this is where you can rename or edit the automation.
- Click “Save”
- All Automations will be on this page, you can go back and edit by pressing on the …
Documents / Resources
 |
ToSee Security Home Screen Click on The Smart Icon [pdf] User Guide Home Screen Click on The Smart Icon |
