TooQ TQC-5701U3C-B ATX Semi Tower Case 

INSTALLATION

1. To remove the side panels, unscrew the screws at the rear and slide the panels out.
   
2. You can install up to 2 x 3.5″ hard disks in the available slots. By aligning the holes of the hard disk and securing them with the 4 screws. If necessary, to facilitate installation, you can remove the disk bracket by unscrewing the 2 screws at the bottom.
3. You can install up to 2 x 2.5″ hard disks in the available slots. By aligning the holes of the hard disk and securing them with the 4 screws.
   
4. 3 x 5.25” holes available (2 internal and 1 external).
5. Ventilation system
   Front: 3 x 120 mm (not included).
   Side: 1 x 120/140 mm (not included).
   Rear: 1 x 120 mm (Included).
   
6. Front USB I/O connectors
   1 x USB3.0 / 2 x USB2.0 / HD Audio.

CUSTOMERS SUPPORT

All specifications are subject to change without notice. Please check with your supplier for exact offers. Products may not be available in all markets. Product color and bundled software versions are subject to change without notice.
Brand and product names mentioned are trademarks of their respective companies.

Manuals available at: www.tooq.com

Documents / Resources

TooQ TQC-5701U3C-B ATX Semi Tower Case [pdf] Instruction Manual TQC-5701U3C-B ATX Semi Tower Case, TQC-5701U3C-B, ATX Semi Tower Case, Semi Tower Case, Tower Case

References

• User Manual