TOMMATECH Cloud App
Specifications
| Feature | Description |
|---|---|
| App Compatibility | Available on Google Play Store and App Store |
| WiFi Connection | Connects within 10 seconds of power on |
| Device Interface | Includes parameter settings, power data, data query, mode setting, start/stop |
Download the App
Download the TommaTech Cloud app from the Google Play Store or App Store. Alternatively, you can download it by clicking the download buttons below.
Account Registration
WiFi Connection
WiFi Connection (Step 1)
By default, it can connect within 10 seconds after the power is first turned on.
- Method
Access the Wi-Fi interface on the heat pump control panel, click the QR code button, and add the device by scanning the QR code from the app. - Method 2
When you turn on your phone’s Bluetooth feature, you can see that the device is in pairing mode. If you cannot see it, click the WiFi reset button.
WiFi Connection (Step 2)
- Click on the + in the right-hand corner, then click on Add device.
- Click Add or select the Smart Heat Pump from the list
WiFi Connection (Step 3)
- Enter your Wi-Fi password Select Your Wi-Fi Network
- If your device has been successfully added, you can access it from the Household section.
Application Interface
- You can dynamically view the heat pump’s power data from the home page.
- When you click on the heat pump icon, you can see the heat pump’s instantaneous power data graph.
Device Interface
Frequently Asked Questions
How do I reset the device?
To reset the device, press the WiFi reset button or follow the reset instructions in the app.
Can I monitor multiple heat pumps with the app?
Yes, you can add and monitor multiple heat pumps through the app by following the same setup process for each device.
Documents / Resources
 |
TOMMATECH TOMMATECH Cloud App [pdf] User Guide TOMMATECH Cloud App, App |