Token TR3TBK Biometric Authentication Ring
Specifications
- Strongest MFA with user convenience
- Protection against phishing, social engineering, malware attacks, and data breaches
- USB-C to USB-A charging cable
- Status indicator LED
- NFC and Bluetooth connectivity
- Fingerprint sensor
- Battery fully charges in 90 minutes
Charging Cable Setup
Remove the charging cable from the box and plug it into a continuous power source. The USB-C end can be plugged in directly or used with the included USB-C to USB-A adapter.
Connecting the Ring
Remove the Token Ring from the package and connect it to the charging cable. The cable and Ring are keyed to prevent misalignment. The LEDs will display a rainbow pattern when charging begins.
Locate your PIN
The PIN number is located on the product box and inside the packaging. It can also be derived from the serial number engraved inside the Ring.
Initializing
When the Ring is connected to the charging cable, a rainbow pattern will display on the LEDs indicating charging has started. The LEDs will pulse with the battery status color while charging. A solid green LED indicates a full charge, which takes 90 minutes.
Fingerprint Registration Tips
- Avoid applying excess pressure during scans.
- Ensure fingers and ring are clean, dry, and not too cold.
- Select a finger for scanning that is less likely to be damaged.
Mac Compatibility
Mac does not natively support FIDO authentication over Bluetooth. Download the Token Desktop Utility from the Mac App Store for setup, including Bluetooth pairing and fingerprint enrollment.
“`
Charging Cable Setup
Remove the charging cable from the box .and plug it into .a c. ontinuous power source. The .USB-C can be plugged in directly or used with the included .USB-.C to .USB-A adapter.
6
Connecting the Ring
Remove the Token Ring from the package and connect it to the charging cable. The cable and Ring are keye.d to prevent misalignment. The LEDs will display a rainb.ow pattern when charging begins.
Locate your PlN
The Pl N number is located on the produ.ct box and inside the packaging. It can .also be .derived .from the serial number engraved inside the Ring, as seen above.
8 Initializing
—-..–
Battery is high Battery is okay
Battery is low
When the Ring is connected to the charging cable, a rainbow pattern will display on the LEDs indicating charging will begin.
While the Ring is charging, .the LEDs will pulse with the battery status color. When th.e LEDs turn solid green th.e .charge is full and you .may continue with first time setup. The Ring .fully charges in 90 minutes.
If the rai.nbow LEDs do not illuminate when the Ring is connected to the charging cable, double check the alignment of the charging cable pins and ensure they align with the grooves in the Ring.
7
Once your Ring is fully c.harged and displays solid .green LEDs, you are ready to begin the flngerprint enrollment process. Using your mobile device download the Token Ring app, or scan the QR code below. Mac users – please download the Token D.esktop .U.tllity from the Mac App Store. See page 10 for more details. The Token Apps are simple step-by-step guides fo.r setting up and using your Token Ring. For flngerprlnt enrollment .tips and access to the video tutorials, please see the next page.
Android
.8
10S
.Token Desktop Utility
_·
Fingerprint Registration- Tips Setup Video
Watch the Setup Tutorial
For optimal fingerprint registration, avoid applying excess pressure to the sensor during scan_s. Think ‘touches’ not pressing _a button.
It is best to perform fingerprint registration _when both your fi.nge. r and_ ring are clea. n, dry, and not .overly .co.Id.
If your hands take a lot of abuse due to hobbies try selecting a fi.nger for scanning that Is less likely to be damage.d.
tokenring.com/setup
9
Mac d.oes not natively support FIDO authentication over Bluetooth.
Token Desktop Utility
.Token .Deskt.op Utility Whatlslt?
· The Token Desktop Utility provides Mac users with the Bluetooth functionality for FlDO authentication.
· Jt is also a simple step.-.by-step .guide to setting up and using your Token Ring.
G.ettlng Started 1. Download the Token Desktop Utility from the Mac App Store.
2. Open the opp and accept the Autofill &. Passwords permissions presented by the Token Identity Service pop up.
3. Follow the on-screen prompts to complete setup; which includes Bluetooth pairing and fingerprint enrollment.
lO
*HOLD*
x2 = Authenticated
*HOLD*
… —
—- -,,,,,,
x2 = Authentication Failed
How to Authenticate
· ·
Double tap the fingerprint sensor The LEDs will turn solid .white – this means it’s ready
to scan yo.ur fingerprint.
· ·
Place the f. inger you registered .on the sensor. When you. see two green blinks, you’ve successfully
· ·
authenticated.. The Ring will then pulse purple or blue (NFC or .BLE). Note: lf the Rin.g .do.es not blink green right away,
small adjustments to finger position can be made.
Seeing Red LEDs?
If the Ring blinks re.d twice, it did not recognize your fingerprint.
Tr·· yDAadogjauublsnlte:ytoaupr
the sensor. finger position
slightly.
lf··ltCMfahaieklscekasgtuharaeint.y:tohuersfeinngseorr
is is
clean, dry, clean and
and dry.
not
cold.
ll
Token Ring supports both NFC and BLE (Bluetooth) .for s.ecure wirel. ess c. ommunication. T he two mo.des .are interchangeable; yo.u have the choice of which you want to use.
Afte.r successful authen. tication, th.e Ring w. ill display .its .current mode with pulsin.g lights:
:-:::/-_-‘”.-….. P.urpJe = NF.C
To switch the mode, tap the sensor once.
.T he .Ring will remember your last used mode and start in that mode at the .next authentication.
12
NFC
…
….
—
—
rrrrrtfl
-=– .,,,,.,
B.LE
…
-,,,,,,, .,,,.
*TAP*
— ……. .,,.,-
Checking Battery Status
To check you. r battery status, do a single tap on the fingerprint senso.r. The LEDs will illuminate with the corresp.onding b.attery status color.
.Cancelling Any Action
Any active function can be canceled by pressing a. nd _holding the fingerprint sensor until the LEDs tu.rn _o_ff (approximately l second).
13
+
Navigate to the Bluetooth settings on your device.
Wlndo.ws users: Locate the Device Settings section. Jf 4’Bluetooth devices discovery” is present, switch Default to “Advanced’.
*Note: lf you do not see this se.ction you may continue to the next step.
Mac users: T he Token Desktop Utility will perform BLE pairing with your Ring during first time setup (see page 10).
14
You are now ready to pair your Token Ring.
Select “Add device”.> ln the pop up window choose “Bluetooth”.
Authenticate to your Ring – double tap and scan fingerprint during the solid white LEDs. Pulsing blue LEDs Indicate Bluetooth mode, if you see purple LEDs, tap. sensor once to switch modes (see pag.el2).
Once your Ring is in Bluetooth mode, double tap the fi.ngerprint sensor to .enter pairing mode. Indicated by red/ blue .flashing lights.
Select your Ring from the list of available devices, enter your PlN, and c. lick “Connect’.
Note: Your PlN can be found inside the box or derived from the serial number engraved Inside the Ring (see page 6).
Secure your online accounts and applicatio. ns in 3 .easy steps
Stepl Login to the opp or service you wish to secure and verify that it supports the use of FID02 security keys.
Step2 Navigate to the Account Security settings and find the option to add a security key as your two or multifactor authentication. If security key is not an option, choose passkey.
Visit tokenring.com/works-with for a full list of supported applications.
Step3 Follow the on-screen prompts. You may use NFC or BLE to register your Ring. Note: BLE requires pairing first (see page 14)
15
Choose an App or S.ervlce
Go to the login .screen. Make .sure your .Ring ls paired to your device (see page 14) and registered with the .service (see page 15). Select the option to login _using a .security key or passkey – instructi.on.s ma.y vary between operati.ng systems.
16
Logging In With Your Ring
When prompted, single tap the .sensor to activate the Ring, this will begin the BLE connection to your device. Follow the on screen prompt to touch your security key, the Ring will display solid white LEDs, indicating it i.s ready for fing. erprint authentication.. Scan your fin. gerprint.
.S.uccessfu.l Authe.nti.cation
Succe.s.sful authentication will display two green blinks, you are now .securely logged in! If _authentication wa.s not successful, you will be prompted to try again, the Ring will display solid white LED.s for a.nether fi.ngerprint scan.
NFC
….,., .,
0 ot<en
,Enable .NFC on, Your D.evice.
.You may use your device’s built-in N.FC or conn.ect an external reader.
iBne· y.souurred..·N.eFvCI·.cecosmettm·Inugnsi.cation ls enabled
Actlvat.e ,NF.C Mode on .the Ri:ng
Authenticate to yo.ur Ring by .double t.applng the sensor and scanning your :fingerprint d,urlng the solid white LEDs.
Successful authentication will display fw.o green blinks then p.ulse purple. indicating NFC mode. Ifthe pulse Is.blue, top :o,nce (see page 12 for more details).
,Complete Login Using NF_C
.Place .t.he .bottom .of the Ring very .close to .or touch the NF.C reader for 3-4 seconds. Some re.aders may beep upon scanning, leave the Ring ln place until .the login prompt clears. Yo.u .are now securely Jogge.d Jn!
17
The Token Ring can be easily .updated o. ve.r a se. .c.ure Bluet. .oot.h connection.
How to Update your Rlng:
1. Open the Token App. 2. Locate the Details section. 3. lf an update is available, select Update. 4.. You will be prompted to place the Ring on the
charger and click Let’s do it!
· The Token Ap. ps are updated in the same way other applications are; when an update is available it .appears in your App store or .automatically updates depending on your device settings.
18
‘
Using t.he Ring While Charging
The Token Ring can b.e used while connected to the charging cable. lf the battery is fully drained, it may take a few moments for the Ring to wake up.
Changing Your Sca.nned Fing.erprint
To .use a different finger, .at this time you’ll need to .do .a factory reset. Warning! This .will .erase aU stored .credentials. Go to Settings > F.actory Reset In the mobile app or Utility to begin. See page 9 for fingerprint r egistration tips.
19
·
Logging into Multiple Accounts
Token Ring can store .up to 100 digital credentials, which can be used. .with many .accounts-personal, work, or managed. Simply set it up as your security key in each application (see page 15).
20
Replacing Your Phone or Laptop?
No problem! The Token Ring stores all credentials and
biometric data inside its Se.cure Element. To pair your Ring
with a new phone or device, simply download the
creogrrisetseproendddinegvicTeo,k,.eJnf
App your
and during setup select “Pair device is lost or inaccessible,
a you
can still use your Ring for authentication.
(Q)
If the Ring Doesn’t P.ower On
Jf the LEDs .don’t rainbow when the Ring is connected to the charger, double check the cable alignment and po.w.er source. Jf sufficient, leave lt .on. the charger for at le.est 30 minutes, then try again. lf the LEDs still don’t turn on, please contact support.
Repeat.e.d Issues or ‘_Stuck’ Ring?
If you’re experiencing repeated unexplained issues or your Ring is ‘stuck’, place it .on the charger. The rainb.ow lights indicate charging has begu, n, b.ut also performs a ‘soft reset’ of the Ring.
If further assistance or troubleshooting is needed please visit tokenring.com/suQQOrt
.Trouble Authenticating
Token Ring scans your finger multiple ti.mes in Jess th.an a secon.d. Jf you .are consistently failing fingerprint authentication try using a clean cloth to .ensure both your finger and the fingerprint sensor are clean, .dr. y, and not overly cold. Also be sure you are using the correct finger.
21
The fingerprint ,s.e.n.s.o.r works, best when it’s .clean..
_. .Use the included p.urple’· rnicroflb:er cloth to .wip.e .fh.e sel’Sor.,
· .F.o.r .d.e.ep.e.r .cleanin.g., .yo.u .m.ay .use Jso.p.ropyl .alcoh.o.l or
a small amount .of.mil.d .han.d so.a.p.. Dry the ring .co.m.plete.ly.
_. Wamlng! .D.o not .use ultrasonic .cl.eon.e.rs .o.rjewelr:y .g.ra.d.e solvents – .t.hese .ca.n .d.amage t.he s.e.nso.r .a.n.d :void f.he warranty.
· .Fo.r .b.est results,, .use t.he ring .wlth .cl.e.o.n, .d.ry,..an.d wa.rm hands.
22
· Avoid leaving the Ring exposed to extreme hot or .cold environments, such as In a _car during the heat of summer or the cold of winter.
· To prevent scratching the finish of the Ring, avoid coarse, rough surfaces (such as brick, sand, concrete) and sharp metal (such as car keys, key chains, other jewelry).
— AI I I I I
23
Authenti.cation
Waiting for fingerprint Authenticated Authentication failed NFC mo.de BLEmode
0
(Q)x2
x2
‘IQ'”: : /……
24
O.ther
B.attery level BLEmode pBaluireitnogomthode
Power Management Battery off charger
Battery on charger
Battery level high 40.-10.0% Battery level medium 20-39% Battery level low <20%
:/·,: :/·,:
Soflreset/ charging
—
Battery fully charged
Battery level high .Battery level medium
__/'(Q)’/_:_-
Battery level low
Note: The Token App will display the exact battery percentage with a single tap or anytime using BLE.
Errors
HlongH HJongH
Verification failed
Critical error
:’l(i<: x4 /’
25
If you need further guidance, a refresher on setting up security keys, or you encountered any issues, please contact us:
Visit our support page: tokenring.com/support Email us at: support@tokenring.com
Call us at: 866-328-7464 for assistance.
We regularly add additional written and video implementation guides to our support page. Please let us know if your favorite software is missing
and we will assist you.
26
FCC Regulatory Information
This device (FCC ID: 2AVVU-TOKEN-TR3TBK) complies with Part 15 of the FCC Rules. Op.eration is subject to the following two conditions: (l) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital .device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea – sonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause regul.atory harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver ls connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this device not exper ssly approved by Tokenize, Jnc could void the user’s authority to operate the device. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
RF .exposure safety This product is a radio transmitter and receiver. lt’s designed not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission. This transmitter must not be co-located or operating in conjunction with any other antenna .or transmitter.
Responsible party for FCC Compliance: Tokenize, Jnc 4545 East River Road, Suite 310 West H.enrietta, NY 14586 585-625.-8059 support@tokenring..com
27
Documents / Resources
 |
Token TR3TBK Biometric Authentication Ring [pdf] User Guide TR3TBK, TR3TBK Biometric Authentication Ring, Biometric Authentication Ring, Authentication Ring |