Todaair 2 Mesh Router

Jiangmen Todaair Electronics Co., Ltd

• Address: 6th Floor, Electronic Building, No. 1 Guangdeli, Pengjiang District, Jiangmen City, Guangdong Province China 529000
• Tel: +86-750-3135725
• www.todaair.com

Supporting product information

Please scan the QR code to obtain the electronic manual for detailed instructions.

Interface Description

TD-MRT42

1. ORST: Press and hold for 8 seconds until the indicator flashes to restore factory settings successfully.
2. Mesh: Press and hold for 3-5 seconds for quick pairing.
3. WAN/LAN: Adaptive network interface.
4. ALAN: Connect to PC or other wired devices.
5. Power: 12V 1.5A Power Input.

TD-MRT43

1. Mesh: Press and hold for 3-5 seconds for quick pairing.
2. LAN: Connect to PC or other wired devices.
3.  WAN/LAN: Adaptive network interface(Standard PoE 48V power supply).
4. RST: Press and hold for 8 seconds until the indicator flashes to restore factory settings successfully.
5. Power: 12V 1-1.5A Power Input.

TD-MRT45

1. OWAN (PoE) : WAN network port(Standard PoE 48V power supply).
2. LAN: Connect to PC or other wired devices.
3. BRST: Pretor and hold for seconds until the indicator flashes to restore factory settings successfully.

Indicator Status Description

TD-MRT42

TD-MRT43

TD-MRT45

Mobile Phone Configuration

Main Router Configuration

After the device is powered on and wait for the device to startup completely. Then plug the Ethernet into the WAN port of the device. When the network cable of the optical modem is connected to the router, check whether the IP login address of the optical modem is 192.168.1.1 or not. If so, do not connect the optical modem to set the router first. If not, you can normally connect to configure the router.

Step 1
Connect the default WiFi of the main router by mobile phone: Mesh Wireless The default password is Admin 12345.

Step 2
Enter the IP address of the device of the mobile browser: 192.168.1.1 to the page. The default login password is admin.

Mobile Phone Configuration

Step 3
Enter the configuration guide, select the operating mode of the device “Router”, and the click “Next” button.

Step 4
After the WAN is connected the optical modem, select the “Dynamically obtaining addresses”, and click “Next” to set the wireless parameter. If this router is used for dial-up Internet access, select the “POE” and then click “Next”.

1. PPPOE: If using the main router to dial-up, you can fill in external network account information on this page.
2. Dynamically Obtaining Addresses: Automatically obtain the IP address assigned by the superior.
3. Static IP Address: Fixed an IP address.

Step 5
Set the wireless name and password and click “Next” button to finish the setting.

Step 6
Click “Complete” button to finish the setting and guide of the configuration, it will jump into the main page of the Mesh router.

Add Sub-router Configuration
The sub-router must be powered on before the Mesh connection. If there are many sub-routers needed to achieve the Mesh connection, it needs all sub-routers to be powered on at the same time.

Step 5
Set the wireless name and password and click the “Next” button to finish the setting.

Step 6
Click the “Complete” button to finish the setting and guide of the configuration, it will jump to the main page of the Mesh router.

Add Sub-router Configuration
The sub-router must be powered on before the Mesh connection. If there are many sub-routers needed to achieve the Mesh connection, it needs all sub-routers to be powered on at the same time.

Step 1
Connect to the main router WiFi that has been set up. The WIFI account and password is based on the setting of Step 5. Enter the IP address of the device again with the mobile browser: 192.168.1.1 to enter the page. The default login password is admin.

Step 2

1. Click “Network.”
2. Click”” in the top left corner.
3. Click “Edge AP”to expand the sub-router.

Step 3
Click button of “Find New Router”to jump to the page of”Add Edge Router”. It needs to wait 3-5 mins to add the sub-router and nothing else needs to be operated while it’s waiting. If a new device is displayed after the search, click the ” Finish” button and the sub-router is added successfully. If the device search fails, reset the sub-router, and wait until the startup is complete, then search again according to the preceding steps. After the device is added, you can click the device to view the added sub-router.

Warranty Terms

Dear customer:
Hello! First of all, thank you for purchasing our company’s products. We would like to express our sincere gratitude! In order to provide you with high-quality and satisfactory after-sales service, while also better protecting your rights and interests. Please read this clause carefully.

Quality Commitment
Our store adheres to the principle of “users are God” and provides customers with high-quality and satisfactory after-sales service. We promise to provide a one-year free warranty service for all products sold by our company. The specific regulations are as follows:

1. Within one year from the date of purchase of the product, our company provides free warranty services for any defective faults that occur during normal use and proper operation based on relevant technical information;
2. If the purchase date of the product exceeds one year, our company provides paid maintenance services;
3. Anyone who purchases our company’s products can enjoy our company’s most professional technical service support and provide the latest upgrade software package service for free;
4. Failures and damages caused by force majeure factors (such as fire, lightning strikes, floods, etc.) are not covered by the warranty;
5. During the warranty period, if the product is severely damaged and cannot be repaired, or if the supply of this type of accessory has stopped, our company will provide other products of equivalent value for replacement. For replacement products, if there is a price difference between them, the customer will make up for the difference. The replaced products no longer enjoy nonproduct malfunction exchange services.

Regulations:If the product has the following situations, it is not within the scope of free full warranty, exchange, or return. Even if the product is within the warranty period, our company will charge relevant repair fees.

1. The repaired products have the following phenomena:
   • Burn marks;
   • Defect or damage of components;
   • Solder pad defect.
2. Negligence in operation includes: damage caused by incorrect wiring of the crystal head failure to wear an anti-static bracelet (for bare boards), and product damage caused by factors such as chip burning, damage to the main board, shielding cover, and RF head;
3. Other problems and malfunctions caused by abnormal use (mainly in the power supply part or noncompany standard power supply);
4. Failure to follow the installation, design, and patch instructions in the manual for subsequent work;
5. When the motherboard is severely burned and cannot be repaired, it is necessary to purchase a new motherboard for replacement.
6. Damage caused by users disassembling, repairing or changing the circuit themselves;
7. The product information is incomplete, such as the warranty label/MAC address/SN code on the body being removed, damaged or altered, and the model sticker being torn off;

Customer Information

Note

1. The shipping costs of return repair are paid by both parties. This means that the customer is required to pay for the return shipping costs and we are responsible for the outgoing shipping costs.
2. For repaired products, please feedback the quality abnormalities within 7-day after receiving the products (with the courier number as date) or we will not take responsibility for the overdue.
3. The cost of return repair should be confirmed and paid by the customer within 7 days. If the cost is not paid after the deadline, our company will regard it as an abstention of repair and send back as is and we will not keep the return repair in warehousing. WE RESERVES THE FINAL INTERPRETATION RIGHT OF THE CONTENTS IN THIS PRODUCT WARRANTY TERM.

Documents / Resources

Todaair 2 Mesh Router [pdf] Instruction Manual 2 Mesh Router, Mesh Router, Router

References

• User Manual