TMS-218 Waxing Kit with Wax Heater

Model No.: TMS-218

PACKAGE CONTENTS

1. Lid
2. Machine
3. Iner-pot
4. User manual
5. AC power cord

ELECTRONIC PANEL INSTRUCTION

OPERATING INSTRUCTIONS

1. Connect AC power cord.
2. Put the wax in the inner-pot.
3. Touch Power On/Off to start the machine.
4. Switch °C/° F as your habit.
5. Touch Solid/Liquid to heat the wax to pre-set temperature, or touch Increase/Reduce to the proper temperature ( The proper temperature differs as user’s endurance).
6. The machine will heat to ll0°C/230° F to melt the wax first, then it will back to your setting temperature and stays (the machine will “beep” when it reach your setting temperature).

TECHNICAL INFO

1. Capacity: 500ml
2. Max temperature: 120°C/248° F
3. Power: 100W
4. AC input: 100-240V 50/60HZ

CAUTIONS

1. Do not touch the inner-pot when the machine is on working status, and keep it away from child or pets.
2. Keep dry around the machine, do not place it in water or pour water into the machine.
3. Do not use when the machine appears El/E2/E3/E4 (cut off the power and reconnect again when it happens).
4. Do not use it to boiling water.

Documents / Resources

TMS TMS-218 Waxing Kit with Wax Heater [pdf] User Manual TMS-218 Waxing Kit with Wax Heater, TMS-218, Waxing Kit with Wax Heater, Kit with Wax Heater, Wax Heater

References

• User Manual