TinyGlow BB2013 Auto Swing User Manual

TinyGlow BB2013 Auto Swing

Production specification

Product features

1. Swing from side to side, with five gears mimicking human movement.
2. Protecting baby’s spine design on the basis of human engineering.
3. Power suppled by safe 5.8—6V ow voltage adapter.
4. Simple and convenient to use.
5. Seat cover made of environmental-friendly super soft fabric and non-textile, cozy, breathable and safe removable and machine washable seat fabric.
6. Made of aluminum alloy base with light weight and strong hardness guaranteeing safety for baby.
7. Controlled by front panel or remote controller, easy to operate.
8. With motion lock and safety belt for protection.
9. With built-in soft nature sounds & Bluetooth enabled for music.
10. Automatic motion detection.

Parts List

Make sure that all of the follow parts listed are included in the box. If any parts are missing, please contact us before use via E-mail: tinyglow@yeah.net

1. Pillow x 1
2. Toys x 2
3. Toy bar x 1
4. Seat pad x 1
5. Remote controller x 1
6. Adapter
7. Seat frame & seat cover x 1
8. Foot tube x 2
9. Base bracket x 1
10. USB cable x 1
11. Screws x 4
12. Screwdriver x 1
13. User manual

Assembly Instruction

Assembly & Disassembly

l. Base bracket
Step 1: Insert the left and right foot tubes into the base, making sure that the screw holes on the leg tubes are aligned with the screw holes on the bottom of the base
Step 2: Secure the foot tubes using the screwdriver with screws provided in the accessory polybag. As shown in figure below.WARNING
Caregiver should take good care of your child, prohibit to play accessories and avoid to get hurt or swallow!

Seat frame

Assembly:

1. Step 1: Connect the top tube to the bottom tube.
2. Step 2: Insert the seat frame in the base bracket with ” O shape components aligned.
3. Step 3: Place seat cover over the seat frame.
4. Step 4:
   • Snap the buttons.
   • Buckle the buckle.
5. Disassembly:
   • Keep pressing the sheet metal on the back of base bracket and pull up the seat frame.

Pillow & seat pad
Assembly:

• Step 1: Place the seat pad on the seat, thread safety belt through the pad and fasten the buckle.
• Step 2: Attach the pillow to the top retaining ring of the seat and fasten the Velcro

Disassembly:
Pull off the Velcro to detach the pillow and unfasten safety belt by pressing the center button.

Toy bar with toys
Assembly:

• Step 1: Attach the toys on the bar, fix the toys with Velcro.
• Step 2: Located the holes on both sides of seat cover, and then fix the toy bar to the seat frame using the clasps on both sides. As shown in the figure below
• Incline angle: The toy bar has three gears of incline angle, you can set the suitable incline angle by keeping holding the top part of toy bar and push downwards or upwards.

Disassembly:
Loosen the clasps at both sides, and unfasten the Velcro to remove toys.

WARNING
NEVER lift or carry baby in the product by toy bar. The toy bar is not intenfed to be used as a handle

Usage Introduction

Safety belt Fasten:
Place the baby into the product, pass his arms through the shoulder straps and thread his legs through both sides of crotch support restraint, fasten all buckles, then turn the crotch  support cover down and stick with Velcro.

Adjust length:
Adjust the safety belt buckle up and down or left and right to make the length meet the need of your baby’s safe.

Unfasten:
press the center button to release the safety belt when you need to pick up your child from the seat.

WARNING
ALWAYS use restraints. Adjust to fit snugly.

Motion lock
Fix the seat in place by switching the lock mechanism.
Unlock: upwards
Lock: downwards (will not swing side to side in this setting)

NOTE: Motion lock is only for use while motion mechanism is deactivated.

Power supply
There are two power supply options: adapter and power bank(not included).

Option 1: adapter

• Input: AC 100v-240v 50/60 Hz
• Output: DC 5.8v-6.Ov/1A

NOTE: ONLY use the adapter provided by the manufacturer, DO NOT use an adapter with an output voltage greater than 6 volts.

Option 2: Power bank
Connect the power bank to the product using the USB cable, and supply power to the product.
NOTE: The product does not come with a power bank. lease choose a safe power bank.

Button description

ON/OFF: Press this button and the indicator light will be turn on. Press it  again to turn off the product.
SWING: Press this button to make product swing side to side and setting swing gear. There are five gears with indicated by digital light.
TIMER: Press this button to set the working time. there are three timing options available: 8 minutes, 15  minutes, 30 minutes. Once the specified time arrives,the product will automatically shut down. You can also choose not to set a timer and the product will keep working indefinitely.MUSIC: Press this button to play the built-in music..
Tap to play or pause music.
Long-press for 3 seconds to switch music.
SWITCH: Press this button to switch to next song.
VOLUME +1-: Press this button to increase or decrease the volume gradually.
AUTO: The default state is gear 2 with timer 15 minutes
NOTE: This product is equipped with Bluetooth function. You can turn on the Bluetooth on your mobile phone and connect with ” BB2013 “, a “beep” indicates the product is connected successfully, and you can play the music on your phone by this product.

Remote control

WARNING
This product contains a button or coin cell battery. A swallowed button or coin cell battery can cause internal chemical bums in as little as two hours and lead to death.

• Dispose of used batteries immediately.
• Keep new and used batteries away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical

attention

• Replace the coin cell battery:
• The remote control contains a CR2025, DC 3v coin cell battery.
• You can unscrew the screw at the bottom of the remote controller with a screwdriver, and replace the battery.

NOTE:

1. Install the replacement battery correctly and make sure the positive and negative polarities are in the correct positions.
2. The effective range Of the remote control is about 13 feet (4 meters),

WARNING

FALL and STRANGULATION HAZARDS: Infants have suffered head injuries falling from swings and have strangled in straps.

• ALWAYS use restraints. Adjust to fit snugly.
• STOP using product when the infant attempts to climb out  (approximately 9months)
• Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
• ALWAYS place the swing on floor. Never use on any elevated surface.
• NEVER leave infant unattended.
• NEVER lift or carry baby in product.
• Adjust the volume to an appropriate level when playing music with this product.
• ONLY be operated by the caregiver; this product is not a toy.
• Check the product regularly before every use. Stop using it if damaged or broken.
• ONLY be used with the recommended power adapter.

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of Children
• Seek immediate medical attention if a battery is suspected to be swallowed inserted inside any part of the body.

WARNING

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children.
• Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Call a local poison control center for treatment information.
• This product contains a CR2025, DC 3v coin battery.
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above 1320F(600C) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
• Ensure the batteries are installed correctly according to polarity (+ and -).
• Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
• Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
• Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

FCC STATEMENT

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Cautions: changes or modifications not expressly approved by the party responsible for compliance could void the user’s  authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

IC warning:
This device contains licence-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with IC’s RF Exposure guidelines. This device and its antennas must not be co-located or operation in conjunction with any other antenna or transmitter

Troubleshooting

Fast self-inspection solution below

NOTE:

1. For other problems, please contact our customer service for help.
2. NEVER attempt to disassemble any parts not mentioned in the user manual nor repair the product unauthorized.

Cleaning & Maintenance

I. Cleaning

1. Clean the base bracket and seat frame with wet cloth and a mild detergent. Dry thoroughly then. Please do not use corrosive cleaner.
2. Removable and washable fabric:

• Seat fabric: Clean it with wet cloth and a mild detergent, and dry it.
• Pillow: Tear the Velcro off and take the pillow off. Put a little cleaner, wash it gently by hands, rinse it with clean water, hang it avoiding sun exposure.
• Seat pad: Unbuckle the safety belt to remove, you can put it in the washing machine to clean.

Maintenance

I. Please check regularly. Make sure all parts are connected.  Stop using for poor connection and connect/assemble it again if necessary.
2. This product contains electronic components, which should not be used in water or a humid environment. Please ensure the product is dry, and store it in a cool and dry place, avoiding prolonged exposure to direct sunlight.
3. To extend the service life of the product, please unplug the adapter when the product is not in frequent use.

MORE INFO

Brand Support
We understand the importance a strong support network can have on both parents and children. It makes all the difference to the healthy development of both you and your child when you are surrounded with the love and support of people who care. In today’s word the need for support is more important than ever, with working and at home mother alike facing pressures and tribulations, the world needs a modern brand to navigate the challenges parents face today. Our story gets personal. Although we do not having the history in the marketplace, we do have the experiences and understanding to know what it feels like to be helpless when things get tough. This experience extends beyond just parents, but b family and friends, all those in your support network who would do anything to show they care. we developed it from this story, a baby brand for the modern family. It takes a village, and our team just joined the community. If you want to join our circle of new parents, please kindly contact us with your Order ID via: tinyglow@yeah.net

After-sale Support
We support lifetime-friendly customer service guaranteed. If you have any questions, please contact us via E-mail (tinyglow@yeah.net) we will be happy to serve you and guarantee a 100 % satisfactory treatment plan. tinyglow@yeah.net