95mm Variable ND
95MM VARIABLE ND TILTA FOR TILTA MIRAGE
INSTALLING THE 95MM
VARIABLE ND FOR TILTA MIRAGE
Inserting the 95mm variable ND filter tray.
When taking out the 95mm variable ND filter tray ,pull the locking toggle to release the filter tray, then remove it from the matte box.
NOTES:
a: When inserting the 95mm variable ND filter tray, please make sure to align the front of the filter tray to avoid any damage to the product.
b: After taking out the 95mm variable ND filter tray , please insert the 95mm circular filter tray.
Manual control
Toggle the wheel located on the top right of the 95mm variable ND filter tray to adjust the ND for your exposure needs .
Documents / Resources
 | TILTA 95mm Variable ND [pdf] Instruction Manual 95mm Variable ND, 95mm Variable, Variable ND, Variable |
