R2L2 XS
Installation instructions
TYPE : R2L2 X
CLASS I 
(CL1) CLASS II 
IK09 IP66 
1
R2L2 XS
The luminaire with clear optic should be positioned so that prolonged staring into the luminaire at a distance <2 m is not expected.
|
R2L2 XS |
|
 MAX |
7.4 kg |
|
SCx |
0,05 m² |
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
2
- When closing
- Wrong position
- Correct position
- Please clip on the correct position
3
Change the working angle
5
4
a) Maintain the gear tray
b) Change to a new gear
5
Cable assembly
a) CL1 only
b) Compact design luminaire, the cable as short as possible
6
CLASS I
CLASS I HFX
|
DALI |
230V  D1 D250/60Hz   = |
 |
7
CLASS II
CLASS II HFX
|
DALI |
230V D1 D2 50/60Hz = |
|
8
(1) = ON 
(2) = OFF 
9
CLASS I / CLASS II
12Nm min
14Nm max
TOP
|
L |
|
| Ø60 |
50mm |
|
Ø76 |
35mm |
|
L |
|
| Ø34 |
50mm |
|
Ø42 |
50mm |
| Ø49 |
50mm |
|
Ø60 |
35mm |
SIDE 
12Nm min
14Nm max
|
R2L2 XS |
|
| Ø34 + reducer #96269015 (59005840) |  |
| Ø42 + reducer #96269015 (59005840) | |
| Ø49 | |
| Ø60 | |
-Replace any cracked protective shield.
-Class II luminaires must be installed so that exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
WARNING: Class I luminaires must be earthed.
-This luminaire operates at mains voltage which must be switched off before intervention in control gear.
-Any modification to this luminaire is forbidden.
-Lighted objects nearer than the minimal distance in the is forbidden
96370386 00 06/2024
Documents / Resources
 |
THRON R2L2 XS LED Luminaire [pdf] Instruction Manual 96370386z00, 59005840, 96370386 00, R2L2 XS LED Luminaire, R2L2 XS, R2L2 XS Luminaire, LED Luminaire, Luminaire |
