THITRONIK 100944 Wireless Cable Loop Instruction Manual

THITRONIK 100944 Wireless Cable Loop

THITRONIK 100944 Wireless Cable Loop

Introduction

The radio cable loop allows you to secure your mobile belonging outside of your vehicle against burglary. After having attached the holder to the vehicle, simply lay the cable around the item to be secured, pull it through the loop at the end of the cable and place the electronic unit into the holder. After having placed the electronic unit in the holder and arming the WiPro III is armed, an alarm will sound in case someone cuts the cable or takes the electronic unit out of the holder. This way, items like bicycles, camping furniture, surfboards, motorcycles, outboard motors etc. can easily be secured.

Interconnection with WiPro III

Proceed as described in the WiPro installation manual.

Range Test

Prior to installation check if the cable loop is able to establish a connection with WiPro III from the desired installation spot.
Please check as follows: Activate WiPro III, take the cable loop‘s electronic unit from the holder (press slightly on lower side of housing to unlock). This should result in an alarm. If this is not the case, change the position of the electronic unit or check whether the connection is shielded by metal.

Installation

The mounting surface must be level so that the holder has good contact.

  • Use the holder as a template and pre-drill if necessary.
  • Now fasten the holder by using the two supplied stainless steel screws.

NOTE: Please be sure to use the enclosed stainless steel screws, as screws made of other materials could impair the function of the wireless cable loop.

The cable loop can now be used.

Technical Data

Power supply: 3V (1xCR2032)
Radio range (in free space): approx. 75m
Transmission frequency: 868,35MHz
Transmission power: <10mW
Dimensions (W×H×D): 50×46×18mm
Weight: approx. 77g

Customer Support

Symbols

Thitronik GmbH hereby declares that this product complies with the requirements and regulations of the directive 2014/53/EU.
The full declaration of conformity is available for download: www.thitronik.de/support

Logo

Hersteller/Manufacturer/Fabricant:
Thitronik GmbH · Finkenweg 9–15 · 24340 Eckernförde · Germany www.thitronik.de

Symbols

QR Codewww.thitronik.de

Logo

Documents / Resources

PDF thumbnail100944 Wireless Cable Loop
Instruction Manual · 100944 Wireless Cable Loop, 100944, Wireless Cable Loop, Cable Loop, Loop

References

Published: January 3, 2025
Updated: January 6, 2025

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

THITRONIK G.A.S-pro III Gas Detection Alarm System Instructions
September 23, 2026
THITRONIK 106 Series Fingerprint Camplock VanLock Instruction Manual
July 24, 2026
THITRONIK BT-connect App User Guide
October 16, 2025
THITRONIK 105339 Cartridge With Mercedes Sprinter User Manual
August 26, 2025