THINKCAR VENU-i Pro TPMS Intelligent Detection Tool
Product Overview
- Flip-up Button:
Switch tires or turn pages upwards. - Flip down Button:
Switch tires down or turn the page. - On/Off Button:
Long press to turn on/off the device. - OK Button:
To activate the programming start button or to enter the function confirmation button. - Charging port:
TYPE-C charging port and development system debug USB port. - Charging Indicator:
An indicator shows red for charging. green for fully charged
Equipment parameters
Equipment start-up
Lung press tie Avon buton to tum on the service, une device budos to ind cate that it ist
Download the I-VENU mobile app
Usage
The Bluetooth icon will appear in the upper left corner of the Venue Pro device screen. after a successful connection.
TPMS Functions
VENU- -Pro can be used with a cell phone APP to activate sensors, program sensors, and cool sensor 1D function: with THINKCAH integrated diagnostic equipment to activate sensors, program sensors, learning, and diagnostic functions; the following is an example of using win think integrated diagnostic equ moment
Activation Sensor
Enter the Vehicle TPMS function screen as shown below:
Place the VENL-i Pro device next to the vehicle’s tire hub (location shown below) and press the device Ok button for vehicle sensor activation.
Tire pressure sensor activation for all four tires in turn.
Sensor Programming
Mode 1: Automatic creation of ID The system automatically creates the sensor ID, places the Star Card sponsor in the round hole above the device for programming, and then returns to the activation page after programming and presses the ok button on the VENU-I Pro device to activate it.
Tip: The (Learning) function is also required after the automatic creation of the sensor ID program is completed.
Mode 2: Manual ID
Creation If the current in-vehicle sensor ID is available, it can be programmed using the manual entry of the original vehicle sensor ID. Select the vehicle tires and click on Manually Create to enter the ID and program it.
Tip: If you choose to rate the sensor ID manually; you will need to perform a “Leam” function after
Mode 3: Activation Copy The original vehicle sensor needs to be activated first to get the original vehicle sensor ID and then write the original vehicle sensor ID to the sensor to be replaced by copying the sensor ID to the StarCard sensor.
- Activate the original vehicle sensor, the sensor data will be displayed on the device after
- Place the StarCard sensor near the top of the VENU-i Pro device and program it.
- Click the [OK button) to program the copied sensor data to be written into the sensor. Ine segramnee sponsor oy directly on tires to be installed on The Venice Ine vehicle IrMs warming indicator will automaucally tum on.
Tip: Before using activation copying, it is important to ensure that the original sensor can be activated.
Mode 4: OBD copying Connect the diagnostic equipment with the vehicle diagnostic seat first. Read the vehicle sensor data from executive iResd ECU |Di, and then went the regd vehicle sensor data into the star card sensor by copying.
- Connect the diagnostic equipment with the vehicle diagnostic seat and click [Read ECU IDI to read the ID information of the vehicle sensor. I
- Select the tire to be operated by dicking the [Copy by OBD ] function.
- Place the THINKCAR sensor near the top of the VENU-Pro unit and program it.
- ECU ID is written into the THINKCAR sensor after programming is completed
Learning
Click Leaming to view the vehicle’s learning methods and original sensor information.
Warranty Terms
Ins warranty Apple chiv to users and distributors who purchase 1HINK IPMS 160u products through normal procedures. Provide tree warranty within one year. THINKCARI Teon warrants are lis electronic procures or dama, as couscous oy obvious in materials on workmen. Damages to tie equipment or components caused by abuse, or unauthorized modification. using for nor-designed purposes, operational manner not specified in the Instructions, etc. are not covered oy unis warrant une compensation or dashboard damage caused by ine select of mis equipment is tried to repair or replacement. THINK- Chh TEch does not bear any indirect and incidental losses. THINKCAR TECH WIll ludo the nature or equipment damage score to us presence inspection metrics. No agents, employees business representatives, or thinking lech are authorized to make any confirmation, notice, or promise related to tHINKCAK I-CH products. Customer service email. succor@lnkcar.com Official Website: ww.thinkcar.com Products tutorial, mesos, Fau and coverage let are ave hole on innkeeper once wooste\ Sellow us on
Contact
- Service Line: 1-909-757-1959
- Customer Service Email: support@thinkcar.com
- Products tutorial, videos, FAQ, and coverage list are available on Thinkcar’s official website.
PS: VENU-i Pro is the model number of THINKCAR TPMS products
Documents / Resources
 |
THINKCAR VENU-i Pro TPMS Intelligent Detection Tool [pdf] User Guide VENU-i Pro TPMS Intelligent Detection Tool, VENU-i Pro, TPMS Intelligent Detection Tool, Intelligent Detection Tool, Detection Tool, Tool |
 |
THINKCAR VENU-i PRO Tpms Intelligent Detection Tool [pdf] User Guide VENU-i PRO Tpms Intelligent Detection Tool, Tpms Intelligent Detection Tool, Intelligent Detection Tool, Detection Tool |
