THINKCAR 500 Automotive Code Reader User Guide

THINKCAR 500 Automotive Code Reader

Product Usage Instructions

• Turn on the ignition of the vehicle.
• Ensure the device voltage is within the range of 9- 18V.
• Confirm that the throttle is in the closed position.
• Select Diagnosis.
• Click OK to enter the system diagnosis.
• Select the vehicle type.
• Enter the diagnosis function list.
• Select READ CODE and click OK to proceed with vehicle diagnosis.
• Visit the official website for product tutorials, videos, FAQs, and coverage lists.

Overview

1. Diagnostic Cable: Standard OBDII diagnostic cable
2. LCD Display: 2.8-inch display (240*320)
3. Code severity alert: Three status indicators
4. I/M Button: Quickly enter “I/M READINESS” to view the data flow
5. Help: About OBD instructions, about data flow instructions, about printing instructions, about exhaust ready instructions
6. Up, down, left, and right keys: used to select interactive functions
7. Return key: Return to the upper function
8. OK Return: Confirm button
9. Mini usb: Used to upgrade software and print functions

Code severity alert

• Code severity reminder: By reading the code, you can quickly determine whether your vehicle needs to be repaired immediately, By reading the code, you can quickly determine whether your vehicle needs to be repaired immediately or until you get home.
• LED indicator warning: There are three LED indicators on the barcode reader DTC: Your vehicle is in good condition.
• Pending DTC: You need to solve the problem and clear the code.
• Permanent DTC: There is a serious problem with your vehicle. If these problems cannot be resolved, you may fail the emission test.

Technical Specifications

• Display: 2.8-inch display
• Working Environment: 0℃ ~ 50 ℃ (32 ~ 122 ℉ )
• Storage Environment: -20℃ ~ 60℃ (-4 ~ 140 ℉ )
• Power Supply: 9- 18V vehicle power
• Supported Protocols: ISO9141, KWP2000 (ISO 14230), J1850PWM,J1850VPM and CAN OBDII protocol

Function Description

The most comprehensive personal OBD scanner

1. Compatible with vehicles after 1996 and vehicles with updated OBDII protocol
2. Read & clear DTCS, check and turn off the engine light
3. Live data stream in a graph for effective troubleshooting
4. O2 sensor, on-board monitor & EVAP system for emission inspection
5. Built-in DTC lookup library, no need to search for DTC definitions
6. View VIN, CID, and CVN, and quickly read vehicle identification
7. Supports 8 Languages including English, French, Spanish, German, Russian, Polish, Italian, and Portuguese
8. Prints the diagnostic data report immediately for your inspection

How To Use

Data Link Connector (DLC) Location

Note: Turn on the ignition of the vehicle, the voltage range of the device should be 9- 18V, and the throttle should be in the closed position.

Application Overview

When the code reader boots up, the Home screen opens. This screen shows all applications loaded on the unit. The following applications are preloaded into the code reader:

• Diagnostics: leads to OBDII screens for all 9 generic OBD system tests.
• IM Readiness: Option allows viewing a snapshot of the operations for the emission system on OBDII/EOBD vehicles.
• Lookup: leads to screens for diagnostic trouble code lookup.
• Review Data: leads to screens for access to the tested data files.
• Print: leads to screens for access to the printing function
• Help: You will find the device’s OBD function and system instructions
• Setup: leads to screens for adjusting default settings to meet your own preference when using the code reader.
• Info: leads to a screen that shows information about the code reader.

1. Select “Diagnosis”, click “OK” to enter the system diagnosis, select the vehicle type, and enter the diagnosis function list. Select “READ CODE” and click “OK” to select vehicle type to view DTC diagnostic data. Select “ERASE CODES” to clear the fault code  Select”
   I/M READINESS” and click “OK” to view the I/M data flow， Select “DATA STREAM” View all data streams, Next click “OK”, and finally you can view the graphics data flow， Select “FREEZE FRAME” and click “OK” to view the freeze frame data stream， Select “O2 SENSOR TEST” and click “OK” to view O2 Sensor data Stream， Select “ON-BOARD MONITORING” and click “OK” to view On-Board Monitor data streams， Select “EVAP SYSTEM” and click “OK” to view EVAP data streams.
2. Select” I/M READINESS” and click “OK” to view the I/M data flow.
3. Select “REVIEW” and click “OK” to enter the REVIEW DATA list. Select “Review DTC” and Next “OK to view diagnostic records and delete records.
4. Select “DTC LOOKUP” and click “OK” to query the fault code analysis
5. Select “Print” and click “OK” to enter the “UPLOAD RECORD” interface to view the prompts, click “Help and I/M” to view the prompts, and decide whether to delete the information.
6. Select “Help” and click “OK”. You will find the device’s OBD function and system instructions.
7. Select “Settings” and click “OK” to set the native language, unit of measure, record mode, and sound.
8. Select “info” and click “OK” to view local information.

Update
The tool can be updated via a USB cable.
Note: Make sure that your computer has an Internet connection.

1. Please log in to http://www.mythinkcar.com official website and find the “THINKOBD Updata TOOL”, download tool “Product Updata Tool Setup.exe” on your computer. Unzip and install it on your computer (compatible with Windows XP, 7, 8, and 10).
   When the installation is complete, connect one end of the USB data cable to the USB port of the computer, Type-c port on the other end of the tool.
2. First, insert the device into the computer identification port, then open the OBD500 upgrade tool. Find the “COMFLG.INI” file and open it, and change the “Serial Name” in the file to as same as the computer and device port “USB-COM name”
3. Finally, open the “CReaderV Plus Upgrade Tool.exe” of the OBD500 installation package file, and click “Start Upgrade” to complete the upgrade.

Warranty Terms

• This warranty applies only to users and distributors who purchase THINKCAR INC www.mythinkcar.com THINKCAR OBD500 products through normal procedures.
• Provide a free warranty for one year. THINKCAR warranty includes electronic products for damages caused by defects in materials or workmanship.
• Damages to the equipment or components caused by abusing, unauthorized modification, using for non-designed purposes, operation in a manner not specified in the instructions, etc.are not covered by this warranty.
• The compensation for dashboard damage caused by the defect of this equipment is limited to repair or replacement. THINKCAR does not bear any indirect and incidental losses.
• THINKCAR will judge the nature of the equipment damage according to its prescribed inspection methods.
• No agents, employees, or business representatives of THINKCAR are authorized to make any confirmation, notice, or promise related to THINKCAR products.
• Please contact Online Customers Service via the order interface.

CONTACT

• Service Line: 1-909-757-1959
• Customer Service Email: support@mythinkcar.com
• Official Website: www.mythinkcar.com
• Products tutorial, videos, FAQ, and coverage list are available onthe  THINKCAR official website.

FAQ

• How do I update the tool?
  • To update the tool, connect it to your computer via a USB cable and follow the instructions provided on the official website.
• What should I do if I encounter technical issues?
  • If you encounter technical issues, please contact Customer Service via phone at 1-909-757-1959 or email at support@mythinkcar.com for assistance.