TP360B, TP360 Bluetooth Thermometer/Hygrometer
“
Specifications
- Model: TP360B/TP360
- Display: Current humidity and temperature, maximum and minimum
recorded values - Battery: 1 AAA battery
- Comfort Level Icons: DRY, COMFORT, WET
- Design: Totally wireless tabletop and magnet-mountable
Product Usage Instructions
Before First Use
- Insert or Replace Battery: Insert two AAA batteries with
correct polarity. - Do not immerse product in water.
- The humidity and temperature monitor is now ready for use.
Care of Your Humidity/Temperature Monitor
Avoid extreme temperatures to prevent damage. Remove battery if
stored for over four months.
Setup Instructions
- Insert two AAA batteries into the battery compartment.
- The temperature and humidity will be displayed with the
Bluetooth icon flashing. - Launch ThermoPro Sensor APP and add the thermometer.
- Select the thermometer in the app to complete pairing.
- Once paired, the Bluetooth icon will stop flashing, displaying
current readings.
Declaration of Conformity
Manufacturer confirms compliance with Radio Equipment Directive
2014/53/EU, EMC Directive 2014/30/EU. Full declaration at EU
Declaration of Conformity.
Disposal Instructions
Dispose of the unit at approved facilities or local recycling
centers. Follow regulations and contact local authorities if
unsure.
FCC Statement
Any modifications not approved by the manufacturer may void the
operating authority. Complies with FCC Rules part 15.
FAQ
Q: How do I check the comfort level on the device?
A: The device displays icons for DRY, COMFORT, WET based on
humidity levels.
Q: What should I do if the Bluetooth icon keeps flashing after
pairing?
A: Press and hold the button for 2 seconds to reset the pairing
process.
Q: How do I prevent damage to the device?
A: Avoid exposing the unit to extreme temperatures and remove
the battery if storing for an extended period.
“`
Bluetooth Thermometer/Hygrometer
INSTRUCTION MANUAL
Introduction
Model No. TP360B/TP360 According to the operating system of your smartphone,
scan the following QR code to download and install. IOSANDROID
Congratulations on your purchase of a Smart, Remote Bluetooth-connected Thermometer/hygrometer. You will now be
able to remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your
smartphone.
Features
1. Display: Displays the current humidity and temperature, maximum and minimum humidity/temperature recorded in the past
2. °C/°F/Clear Button: Press once to change the temperature display unit in °C or °F. Press and hold for 2 seconds to clear the maximum and minimum humidity/temperature readings recorded in history.
3. Battery Compartment: Holds one 1 AAA battery to power the unit. 4. Comfort Level: 3 icons: DRY, COMFORT, WET
If humidity is below 10% to 30%: Dry If humidity is between 31% to 60% : Comfort If humidity is above 60% to 99%: Wet 5. Totally wireless tabletop and magnet-mountable design
BEFORE FIRST USE
1. Insert or Replace Battery: Insert tow AAA batteries in correct polarity (+) and (-) as indicated. 2. Do not immerse product body in water. 3. The humidity and temperature monitor is now ready to use.
CARE OF YOUR HUMIDITY/TEMEPRATURE MONITOR
Do not leave exposed to extreme high or low temperatures since this will damage electronic parts and plastics. Remove battery if stored for more than four months.
Specifications
1. Temperature range: -58 °F ~ 158°F (-50 °C ~ 70 °C). 2. Humidity range: 10% ~ 99%. 3. Comfort display: DRY, COMFORT, WET 4. Temperature display unit: °C °F selectable 5. Temperature Resolution: 0.1 °C/°F 6. Humidity Resolution:1% 7. Refresh rate10 seconds 8. Power supply: 2 X AAA 3.0V
Follow the simple steps below to set up your ThermoPro Bluetooth Thermometer/Hygrometer and remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your smartphone! Step 1: Download and install the “ThermoPro Sensor” App. Scan the QR code above, or search for “ThermoPro Sensor” on the Apple Store for IOS devices or on the Google Play Store for Android devices. Download the App and install it on your smartphone. *iPhone and iPad apps for IOS 9.0 and above. *Android app for versions 4.4 and above. *Android users need to allow all the requests about this app from Android system. Step 2: Enable Bluetooth on your smartphone under the smartphone Settings section. If your smartphone has Bluetooth enabled, you can skip this step.
Step 3: Insert two AAA batteries into the battery compartment on the back of the thermometer in correct polarity (+) and (-) as indicated.
Step 4: The temperature and humidity will be displayed on the screen and the Bluetooth icon will be flashing at the top
of the display. The Bluetooth icon pairing to your mobile phone.
will be flashing for 2 minutes which indicates that the thermometer is ready for
Step 5: Launch ThermoPro Sensor APP and press to add a thermometer. The thermometers will be shown on a list and select one to pair. Once pairing is complete, the Bluetooth icon on the thermometer display will stop flashing and the current temperature and humidity will show on the APP. If the Bluetooth icon stops flashing and you haven’t finished the pairing, press and hold the button for 2 seconds and the will be flashing again ready for pairing.
Done! Your ThermoPro Bluetooth Thermometer is ready for use! Any questions or need more help with setup, please feel free to contact us.
Declaration of Conformity Hereby, the manufacturer declares that this product with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://itronicsmall.com/eu-declaration-of-conformity/ complies
Disposal of the electronic appliance This electronic appliance should not be disposed of with normal household waste.
Dispose of the unit at an approved facility or at your local recycling center. Please observe the current rules and regulations when disposing of the appliance. Contact your local council if in doubt.
LIMITED ONE-YEAR WARRANTY ThermoPro warrants this product to be free of defects in parts, materials and workmanship for a period of one year, from date of purchase. Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product to ThermoPro. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. CUSTOMER SERVICE Telephone: 1-877-515-7797(USA & Canada only) Email: service@buythermopro.com Hours: Weekdays 9:00 AM- 6:00 PM EST
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receivingantenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
ThermoPro TP360B, TP360 Bluetooth Thermometer/Hygrometer [pdf] Instruction Manual TP360B, TP360, TP360B TP360 Bluetooth Thermometer Hygrometer, TP360B TP360, Bluetooth Thermometer Hygrometer, Thermometer Hygrometer, Hygrometer |