The Things Stack For LoRAWAN

Product Information

Specifications

• Product Name: The Things Stack
• Website: https://lora.alfaiot.com/console/gateways

Product Usage Instructions

Create a New User Account

1. Go to the website address https://lora.alfaiot.com/console/gateways
2. Click on “Create an account” to enter the new account and password interface
3. Input the new account information and click “Create account”
4. The new account will be created successfully

Login to Your Account

1. Input your username and password
2. Click on the login button

Application Configuration
Follow the steps below for application configuration:

1. Step 1
2. Step 2
3. Step 3
4. Application configuration will be successful

Add a Gateway
Follow the steps below to add a gateway:

1. Step 1
2. Step 2

Add a Device
Follow the steps below to add a device:
Note: Make sure the gateway is online before proceeding.

1. Gateway is online
2. Step 1
3. Step 2
4. Step 3
5. Step 4
6. Step 5
7. Device added successfully

Data Checking
To check data, trigger the meter to uplink data after the network join operation.

Command
To send a command, follow the steps below:

1. Take the remote valve control (close valve) command as an example
2. Check the command
3. Downlink command success
4. Trigger the meter to make valve control success

Frequently Asked Questions (FAQ)

• Q: How can I create a new user account?
  A: To create a new user account, follow the instructions provided in section 1 of the user manual.
• Q: How can I add a gateway?
  A: Refer to section 4 of the user manual for detailed instructions on adding a gateway.
• Q: How do I check data?
  A: Check section 6 of the user manual for instructions on how to trigger the meter to uplink data.
• Q: What if I encounter issues with command execution?
  A: If you face any issues with command execution, refer to section 7 of the user manual for troubleshooting steps.

USING

1. Create new user account
   Login the website address: https://lora.alfaiot.com/console/gateways
   Click Create an account to enter the New account and password interface
   Input the new account information and click Create account，the new account is creted completely
2. Login account
   Input username and password and login
3. Application configuration
4. Add the gateway
5. Add the device
6. Data checking
   Trigger the meter to uplink data after the network join operation
7. Command
   Take the remote vlave control (close valve)command as an example
   Check the command
   Trigger the meter to make valve control success

Documents / Resources

The Things Stack The Things Stack For LoRAWAN [pdf] User Manual The Things Stack For LoRAWAN, The Things, Stack For LoRAWAN, For LoRAWAN, LoRAWAN

References

• User Manual