F265-52DB Ceiling Fan with Light
“
Product Information
Specifications:
- Model: F265-52DB
- Usage: Ceiling Fan
- Power Source: Electric
- Compatible with: AAA 1.5V x2 batteries
Product Usage Instructions
1. Tools and Materials Required:
- External Hexagonal Wire Wrench
- Stripper
- Phillips Screwdriver
- Step Ladder
- Hanging Bracket Screws
- Main Body wood Blades Screws
- Bracket Spring Washer
2. Installing Fan Blades:
- Install the accessory large iron plate onto the motor.
- Before installing fan blades, remove the motor’s fastener that
is only used to protect the motor from damages in transit. - Install fan blades on the fan’s motor, aligning holes of blades
and motor. - Screw blades with provided screws. Confirm that all blades are
in correct places and tightly screwed.
3. Operating Instructions:
When the remote control cannot control the fan light, follow
these steps:
- Turn off the power switch (wall or main switch).
- Turn it back on after 10 seconds.
- Once you see the light on, immediately press and hold the FAN
OFF button on the remote control for 5 seconds to start the
fan.
Frequently Asked Questions (FAQ)
Q: Can I use a dimmer switch with this fan?
A: No, do not use the fan with a dimmer switch as per safety
guidelines.
Q: What should I do if I encounter issues with the remote
control?
A: If you face issues with the remote control, try replacing the
batteries with fresh AAA 1.5V x2 batteries and re-syncing as per
the provided instructions.
“`
F265-52DB
Contact a licensed electrician if you are not good at performing electrical work. It’s the licensed electrician who installs the fan, if required by the local code. Do not use the fan with a dimmer switch. Turn off power at breaker.
Tools and Materials Required
OFF OFF
External Hexagonal Wire
Wrench
Stripper
Phillips
Step Ladder
Screwdrive
Hanging Bracket Screws
Main Body
wood Blades Screws
Bracket Spring Washer
03
Installing fan blades
Inst all t he accessory large iron plat e ont o t he mot or,
Before installing fan blades, remove the motor’s fastener that is only used to protect the motor from damages in transit then install fan blades on fan’s motor, align holes of blades and motor, then screw blades with provided screws. Please confirm that all blades are in correct places and tightly screwed.
04
OOperat ing inst ruct ions
Operat ing inst ruct ions
Using AAA 1.5V x2 bat t ery When t he remot e cont rol cannot cont rol t he fan light , you can use t he follow ing met hod t o code: first t urn off t he pow er sw it ch (w all or main sw it ch), t hen t urn it back on aft er 10 seconds. Once you see t he light on, immediat ely press and hold t he ” FAN OFF” but t on on t he remot e cont rol for 5 seconds t o st art t he fan.do sstatrt the fan.
05
Documents / Resources
 |
The Home Depot F265-52DB Ceiling Fan with Light [pdf] Instruction Manual F265-52DB Ceiling Fan with Light, F265-52DB, Ceiling Fan with Light, Fan with Light, Light, Fan |