The Home Depot 73×1 Toddler Lyon Com Telhado

Specifications

• Product Name: Toddler Bed Lyon with Roof
• Model Numbers: DL1001 (White), DL1002 (Natural)
• Dimensions: 48 1/4″ x 32″ x 55″ (Option A) / 48 1/4″ x 32″ x 55″ (Option B)
• Weight Capacity: max 50 lbs

Product Usage Instructions

Assembly Instructions:

1. Ensure the space between the bed and solid objects is at least 12 inches to prevent suffocation risks.
2. Use a non-toxic finish specified for children’s products if refinishing the product.
3. To clean, use a mild soap and a damp cloth. Do not use harsh chemicals.
4. Store the bed in a cool place when not in use.

Important Notes:

1. Read all instructions carefully before starting the assembly process.
2. Always assemble the bed on a clean, soft surface to avoid damage.
3. Do not use power tools for assembly as it may damage the product and void any claims.

Tools Required:

• Screwdrivers (not included)
• Hammer/mallet (not included)

Assembly Steps:

1. Refer to the part list and ensure all components are available.
2. Follow the assembly diagram provided in the manual step by step.
3. Use the specified tools to tighten bolts and screws, but do not overtighten until fully assembled.

WARNING CAUTION NOTES

ASSEMBLYINSTRUCTIONS

• Thank you for purchasing this quality product.
• Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece by taking a few minutes to go through this booklet. It contains important information on our warranty and care tips to keep your furniture looking as good asnew.
• Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware.Compare with the parts list to be sure all parts are present.
• Hammer, mallet and screwdrivers are required for assembly.

SAFETY WARNINGS!

• Failure to follow these warnings and the assembly instructions could result in serious injury or death.
• Read all instructions before assembling. Keep instructions for future use.
• Uponcompletion of assembly,makesure all screws, bolts and fasteners have been securely tightened.
• Afrequent and periodically check should bemadeto confirm all the screws and nuts remain tight.
• Never use this product if there are any loose, missing fasteners, loose joints, broken parts, or torn mesh/fabric.
• Contact the distributor or dealer for replacement parts and instructional literature if needed.
• Never substitute parts; the product, including side rails, must be fully erected prior to use.
• Never use bed for infants; this toddler bed is not a substitute for a crib. The toddler bed is used for a child between the ages of 15 months to 5 years with a maximum weight of 50 pounds (22.7kg).
• Never use a plastic shipping bag or other plastic film as a mattress cover unless it is sold and intended for that purpose, as they can cause suffocation.
• Caution entrapment hazard: to avoid dangerous gaps, any mattress used in this bed shall be full size crib mattress at least 51 5/8 in (1310mm) in length, 27 1/4 in (690mm) in width and 5 in (127m) in thickness, or greater, but not exceed 6 in. (150mm).
• Never use a water mattress with this toddler bed.

WARNING: strangulation hazard: strings can cause strangulation!

• Never place a bed near a window where cords from blinds or drapes may strangle a child. Never suspend strings over bed.
• Never place items with a string cord, or ribbon, such as hood strings, pacifier cords, around a child’s neck. These items may catch on bed parts.

WARNING: Infants have died in toddler beds from entrapment. Openings in and between bed parts can entrap the head and neck of a small child. Never use a bed with children under 15 months. Always follow the assembly instructions.

• Do not use a bed if the space between bed and solid objects is less than 12in(31cm), a child could slide into the space and suffocate.
• If refinishing, use a non-toxic finish specified for children’s products. To wash, clean with mild soap and a damp cloth. To store, please keep in a cool place.

IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY

Toddler Bed Lyon with Roof

• DL1001 – White
• DL1002 – Natural

TOOLS REQUIRED

PART LIST

Environmental Responsibility
All wood used in our products comes from reforestation planted areas, without use of native forest.

TOOLS REQUIRED

Hammer, mallet and screwdrivers are required for assembly.

CAUTION: TO ALLOW FOR TOLERANCE DURING ASSEMBLY, DO NOT FIRMLY TIGHTEN BOLTS & SCREWS UNTIL COMPLETELY ASSEMBLED

INSTALLATION INSTRUCTION

FAQ

• Q: Can I use power tools to assemble the bed?
  • A: No, using power tools will invalidate any claim and may damage the product, making it unsafe.
• Q: What should I do if some parts are missing?
  • A: Contact customer support immediately to request the missing parts for assembly.
• Q: What is the weight capacity of the bed?
  • A: The bed has a maximum weight capacity of 50 lbs, please do not exceed this limit for safety reasons.

Documents / Resources

The Home Depot 73x1 Toddler Lyon Com Telhado [pdf] Installation Guide 73x1 Toddler Lyon Com Telhado, Toddler Lyon Com Telhado, Lyon Com Telhado, Com Telhado

References

• User Manual