2480-L3-1 Display Shelf
“
Product Specifications
- Product Name: Display Shelf
- Model Number: 25-08-08
- Maximum Load Capacity: As specified in the manual
- Material: Not specified
- Dimensions: Not specified
Product Usage Instructions
Assembly Instructions
- Remove cap (#2) from Part (#1).
- Make sure the holes on panel (#B) are facing backward.
- Assemble parts as per the provided diagram.
- Secure the unit onto the wall using the provided hardware for
safety.
Safety Guidelines
- Do not exceed the maximum load capacity to prevent instability
and collapse. - Avoid allowing children to climb on the unit.
- Place heavier items on lower shelves to maintain
stability.
Frequently Asked Questions (FAQ)
Q: What is the maximum load capacity of the display shelf?
A: The maximum load capacity is as specified in the manual.
Exceeding this limit can cause instability and product
collapse.
Q: How should I secure the unit onto the wall?
A: Please use the provided hardware to secure the unit onto the
wall for safety reasons.
“`
DISPLAY SHELF
25-08-08 1 / 4
WARNING: >This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. >DO NOT allow children to climb on unit. >Put heavier items on lower shelves.
2 / 4
A 1PC
1
ASSEMBLY INSTRUCTIONS
PARTS
B 2PCS
C 8PCS
1 5PCS
HARDWARE
2 5PCS
3 4PCS
4 6PCS
5 1SET
2 2
2
1
Remove cap (#2) from Part (#1).
Note: The holes on panel(#B) should be facing backward.
B
2
2
C C
C
C
B
C C
Note: The holes on panel(#A) should be facing backward.
C
C
1
2
1
A
1
1
1
3 / 4
2
ASSEMBLY INSTRUCTIONS
4 3
3
3 4
3 3
3 3
Top Front
3
WALL
For safety, please use the provided hardware to secure the unit onto the wall.
40
5
40
40
Top Front
4/ 4
Documents / Resources
 |
The Home Depot 2480-L3-1 Display Shelf [pdf] Installation Guide 2480-L3-1 Display Shelf, 2480-L3-1, Display Shelf, Shelf |