TV Stand Installation
Installation Guide
INSTALLATION MANUAL Tools You Vill Need:
Before the Installation
- Do not throw away packing materials until assembly is complete for small parts may come loose inside the carton during shipment. If parts are missing, please contact us.
- Assemble this item on a soft surface, such as carpet to protect the finish.
- Proper assembly of this item requires 2 people.
- Periodically check to ensure that all connections are tight.
- It is recommended that installation of the product be done by a qualified licensed plumber.
Care and Cleaning
- To protect the finish, avoid use chemicals and household cleaners.
- All hot serving dishes should be placed on a pad.
- Any liquid spilled onto the top should be cleaned up immediately with a damp cloth.
Parts List
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolt to misalign during assembly.
Put the screws (E) througn the metal wasners (F) and insert them into the holes on the bottom of the stand body (A) where the drawer Nas been pulled out in the step1. Align the leg (C) to the holes on the bottom of the stand body and secure it to the stand boay by tightening the screws with the Allen key (D).
Place the stand body (A) on the base (B) as you like,
Documents / Resources
 |
thdstatic 4bc931eb TV STAND Extendable Media Console [pdf] Installation Guide 4bc931eb TV STAND Extendable Media Console, TV STAND Extendable Media Console, Extendable Media Console, Media Console |
