RC3000 รีโมทคอนโทรล

JetWave Remote Controller User Manual

Provided by JetWave Technology Co., Ltd.

ข้อมูลจำเพาะ

The JetWave Remote Controller features a touch screen, intercom button, gear down button, audio speaker, microphone, OK/Power button, gear up button, wristband, NFC magnetic charging port, trigger, and lanyard hole.

• แสดง: หน้าจอสัมผัส
• การเชื่อมต่อ: NFC, Wireless (for board pairing)
• พลัง: Rechargeable via Magnetic Charging Port
• การควบคุม: Intercom, Gear Up/Down, OK/Power, Trigger
• เสียง: ลำโพงไมโครโฟน
• ความสามารถในการสวมใส่: Wristband, Lanyard Hole

คำแนะนำการใช้งาน

1. Connection & Pairing

การจับคู่รีโมทคอนโทรล

1. Press and hold the power button on the remote control for 3 seconds to power on. The remote will vibrate.
2. The remote will display “Device Searching…”. Ensure the Board Battery is inserted and the Board’s lid is closed.
3. Select “Search Pairing” on the remote.
4. Wait for the remote to search for devices.
5. Select your Board (e.g., “JWABCDE”) from the list.
6. Once connected and paired, the remote will display “GO km/h” and other ride information.

บันทึก: When the board is turned on for the first time, it will be automatically activated after the battery is installed (ensure a network connection). The remote control’s network must be normal for successful board activation.

อัปเกรดอุปกรณ์

JetWave devices support OTA upgrades. Regularly check for firmware upgrades for the best user experience. Refer to the “Advanced Operations” section for details.

2. Initial Device Binding (Recommended for Board Owners)

Binding your device with the app allows access to session records, safety zones, and warranty activation.

1. Ensure the remote control is successfully connected to the board.
2. Swipe down on the remote control screen to access “Remote Controller Settings”.
3. คลิก “เกี่ยวกับ”
4. Click “Bind ID”. This will display a QR code.
5. Open the JetWave App on your smartphone.
6. On the Device page, tap the “+” icon.
7. Scan the QR code displayed on the remote control with the app.
8. After successful binding, the app will display device information, and the controller will show the bound ID.

บันทึก: Additional warranty benefits beyond standard coverage are only available to the original owner after binding. See the JetWave webเว็บไซต์สำหรับเงื่อนไขการรับประกันที่สมบูรณ์

3. User Login (Optional)

Logging in allows you to view your ride sessions.

Login Method 1: Scan with APP

1. Swipe up on the remote control screen to access the login screen.
2. Select “Log In with APP Scan”.
3. In the JetWave App, go to “Personal Center” and tap the scan icon.
4. Scan the QR code displayed on the remote control.

Login Method 2: Account Login

1. Swipe up on the remote control screen to access the login screen.
2. Click “Account Login”.
3. Enter your JetWave ID.
4. กรอกรหัสผ่านของคุณ
5. Click “Submit” to log in.

เคล็ดลับ: Get your JetWave ID/password from the App’s Personal Center > Avatar > Personal Information. Riders can view sessions on devices they log into. Device owners can view all records for their devices.

4. Mode Selection & Gear Setting

Choose from three control modes: Beginner, Sport, and Wild.

1. Swipe down on the remote control screen to access “Settings”.
2. Select “Mode Settings”.
3. Choose your desired mode (Beginner, Sport, or Wild) based on your proficiency level.
4. Each mode has different gear settings. Press the “Gear Up Button” to increase the gear and the “Gear Down Button” to lower the gear.

5. Ending Your Ride

1. Hold the power button for 3 seconds to end your ride and sync data to the app.
2. To power off, continue holding the power button until the shutdown screen appears, then slide to confirm.
3. For a force shutdown, hold the power button for 10 seconds.

บันทึก: View your session log in the app (Personal Center > Ride History). Session records are only valid when logged in before riding.

การปฏิบัติการขั้นสูง

อัพเกรดเฟิร์มแวร์

1. Power on the remote control and ensure it is connected to the board and online.
2. Swipe down on the remote control screen to access “Settings”.
3. คลิก “อัพเกรดเฟิร์มแวร์”
4. Review the current versions. Click “Firmware Upgrade” to update all modules with a “NEW” status.
5. For a system upgrade, swipe left and click “Upgrade Now”.
6. Click “Check Version” to upgrade automatically. The remote will restart after the upgrade is complete.

การแก้ไขปัญหา

• รีโมทไม่เปิดใช้งาน: Ensure the remote is charged. Connect it to the magnetic charging port.
• Remote not pairing with board:
  • Ensure the board battery is inserted and the lid is closed.
  • Check if the remote control has a normal network connection.
  • Try restarting both the remote and the board.
  • ตรวจสอบให้แน่ใจว่าอุปกรณ์ทั้งสองอยู่ภายในระยะ
• App not binding device:
  • Ensure the remote is successfully connected to the board.
  • Check your app’s internet connection.
  • Ensure you are scanning the correct QR code (from “Bind ID” on the remote).
• Cannot log in:
  • Verify your JetWave ID and password.
  • Check your remote’s network connection.
  • If using app scan, ensure the app is connected to the internet.
• Session records not appearing in app: Ensure you were logged into your account on the remote control before starting your ride.

คำถามที่พบบ่อย

How do I power on the remote control?
กดปุ่มเปิด/ปิดค้างไว้ 3 วินาที
How do I power off the remote control?
Hold the power button for 3 seconds until the shutdown screen appears, then slide to confirm. For a force shutdown, hold for 10 seconds.
What are the different control modes?
There are three modes: Beginner, Sport, and Wild, each with adjustable gear settings.
Why should I bind my device to the app?
Binding allows you to access session records, set safety zones, and activate your product warranty.
ฉันจะตรวจสอบการอัปเดตเฟิร์มแวร์ได้อย่างไร?
Swipe down on the remote, go to “Settings,” then “Firmware Upgrade.”
Can I use the remote without logging in?
Yes, but you won’t be able to view your ride session history in the app.
Where can I find my JetWave ID and password?
In the JetWave App, go to Personal Center > Avatar > Personal Information.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

JetWave Remote Controller
JetWave Technology Co., Ltd.

ชื่อส่วนประกอบของผลิตภัณฑ์
รีโมทคอนโทรล

หน้าจอสัมผัส
Intercom button Gear Down Button

ลำโพงเสียง
Microphone OK / Power Button Gear Up Button

สายรัดข้อมือ

NFC Magnetic Charging Port
สิ่งกระตุ้น
รูคล้องเชือก
-

-Connection & Pairing
การจับคู่รีโมทคอนโทรล
Press and hold the power button on the remote control for 3 seconds, to poweron. Connect the paired Board according to the prompt .

NA km/h

E

NA

F

Press to Search

Device Searching… You need insert Board Battery and Close Lip

Press Power Button 3s (vibrates on)

Select “Search Pairing”

Waiting for search

เลือกอุปกรณ์
JWABCDE

GO

กม./ชม.
ผู้เริ่มต้น

E

%

F

การเดินทาง

km F LY I N G

km/h Max Speed

When it is turned on for the first time, the board will be automatically activated after the battery is installed (please ensure a network connection).
Check whether the network of the remote control is normal. Only when the network is normal can the board be successfully activated

Choose Board from list

เชื่อมต่อและจับคู่แล้ว

อัปเกรดอุปกรณ์
JetWave devices support OTA upgrades. We highly recommend regularly checking for firmware upgrades and updating to the latest version for a better user experience. Refer to P41 for details.
-

Initial Device Binding
For board owners, it is recommended to scan the QR code with the App to bind the device in order to enjoy more services, such as remotely accessing device session records, setting safety zones, and activating product warranty periods.
Open the QR code on the remote control when successfully connected to the board .

Scan the code with the APP to bind the device

Swipe down to pop up the Remote Controller Settings

คลิก “เกี่ยวกับ”

Click “Bind ID”

Show QR code.

2 In app, tap “+” on Device pageScan QR code.

11:03 น.

5G
สแกน

3 After successful binding, the APP device interface will display the bound device information; the controller will display the bound ID information.

Scan the QR code on Controller to login or bind the device

Warranty period varies by region and usage. Additional warranty benefits beyond standard coverage are only available to the original owner after binding. See JetWave webเว็บไซต์สำหรับเงื่อนไขการรับประกันที่สมบูรณ์
-

-Operation Guide

User Login (Optional)

Login Method 1: Open the “Login” interface on the remote control and log in by scanning the code with the APP.

11:03 น.

5G

Log In with APP Scan

Device SN: Account Login

Swipe up to access login screen

In APP, go to Personal Center and tap scan icon

Login Method 2: Enter the JetWave ID and password on the remote control screen to complete the login.

Log In with APP Scan
Device SN: Account Login

Click “Account Login”

Enter JetWave ID

กรอกรหัสผ่าน

Submit to login

Get your JetWave ID/password from APP Personal Center > Avatar > Personal Information. Riders can view sessions on devices they log into. Device owners can view all records for their devices.
-

Mode Selection & Gear Setting
Choose between three control modes (Beginner/Sport/Wild) based on your skill level.

Swipe down for Settings

Select Mode Settings

Mode Settings Mode

ผู้เริ่มต้น

กีฬา

ป่า

รั้วทางภูมิศาสตร์

Choose your mode

ผู้เริ่มต้น
กีฬา
ป่า
Select the corresponding mode according to your proficiency level

Each mode has different gear settings that you can adjust as needed.

1
2
3
4
5
6
7 8 Beginner
9
10
11
12
13
14
15

1
2
3
4
5
6 กีฬา
7
8
9
10

Wild 1

Press the button to increase gear

Pressing this button will lower the gear position —

การสิ้นสุดการเดินทางของคุณ
Hold the power button for 3 seconds to end your ride and sync data to the app.

To power off, hold until shutdown screen appears, then slide to confirm. For force shutdown, hold for 10 seconds.

Slide to Power Off

View Session Log in app (Personal Center Ride History). Note: Session records are only valid when logged in before riding.
-

– Advanced Operations
อัพเกรดเฟิร์มแวร์
Power on remote control,ensure connection to board and online. 2 Swipe down and select firmware upgrade option. 3 Review current versions. Click “Firmware Upgrade” to update all modules with “NEW” status.

Swipe down Settings

คลิก “อัพเกรดเฟิร์มแวร์”

Click “Upgrade Now”

อัพเกรดเสร็จเรียบร้อยแล้ว

4 For system upgrade, swipe left and click “Upgrade Now”. 5 Click “Check Version” to upgrade automatically. Remote will restart after upgrade.

การอัปเดตซอฟต์แวร์
Model RC2000
Hardware RC2000_MB_v1.0
OS RC2000-v1.0-20241207-19:13:12

การอัพเกรดระบบ
คลิกเพื่ออัปเกรด
The latest version RC2000-v1.0-20241207-19:13:12

Swipe left to system upgrade

Click “Upgrade Now”

Click “arrow” to start

Remote control battery must be above 50% before upgrading.

Wait for restart

-

Remote Control Re-Pairing
If the remote control loses connection or is replaced, you’ll need to pair it with the surfboard. Power on the board with battery installed.

2 Turn on the remote control, click search, find the board’s Bluetooth signal, and select it to connect.

NA km/h

E

NA

F

Press to Search

Device Searching… You need insert Board Battery and Close Lip

เลือกอุปกรณ์
JWABCDE

Turn on the device and click” search”

Click “Search & Pair”

Wait for the search

Select the board that need to be connected

-

การปรับเทียบการควบคุมระยะไกล
Power on remote control in end-of-session state 2 Go to Settings Remote Control Calibration 3 Follow prompts to calibrate throttle trigger by fully pressing and releasing multiple times

Fully Release & Press Trigger,Rrpeat Twice
การสอบเทียบ

Swipe down for Settings

Click “Remote Control Calibration”

คลิก "ปรับเทียบ"

Remote Control Network Status Checking
Network must available at first power-on for successful board activation. Power on remote control, swipe down for settings.
2 Go to System Parameters Network Settings. 3 Check network status – contact support if not normal.

Press and release throttle fully

Swipe down Settings

Click “System Parameters” Click “Network Settings” Check “Network Status”

JetWave provides 2 years of free 4G data. After expiry, users should renew their subscription or use a WiFi hotspot.

-

– Technical Specifica

รายการ
Model Screen Touch Audio Buttons Sensor Mobile Network Bluetooth Wi-Fi NFC GNSS Vibration Motor Gyroscope Protection Rating Operating Time Battery Charging Specs Operating Temperature

RC3000

ข้อมูลจำเพาะ

2.8-inch 240×320, Transflective Screen

มัลติทัช

ไมค์ในตัว, ลำโพง

PTT button, OK button, Up button, Down button

เซนเซอร์ Hall

4G data communication, built-in eSIM

รองรับ

รองรับ

รองรับ

จีพีเอส, GLONASS, กาลิเลโอ, เป่ยโต่ว

รองรับ

รองรับ

IP68

6 ชั่วโมง

3.65V, 3500mAh, 12.78Wh

Magnetic contact charging, fully charged in 2 hours

055

-

– Compliance Information
คำชี้แจงของ FCC
อุปกรณ์นี้สอดคล้องกับส่วนที่ 15 ของกฎ FCC การทำงานอยู่ภายใต้เงื่อนไขสองประการ: (1) อุปกรณ์นี้ต้องไม่ก่อให้เกิดการรบกวนที่เป็นอันตราย และ (2) อุปกรณ์นี้ต้องยอมรับการรบกวนใดๆ ที่ได้รับ รวมถึงการรบกวนที่อาจก่อให้เกิดการทำงานที่ไม่พึงประสงค์
การเปลี่ยนแปลงหรือการปรับเปลี่ยนที่ไม่ได้รับการอนุมัติอย่างชัดแจ้งอาจทำให้สิทธิ์ในการใช้งานอุปกรณ์ของผู้ใช้เป็นโมฆะ
ข้อมูล SAR
This Smart Controller meets government requirements for radio wave exposure. The FCC SAR limit is 1.6 W/kg averaged over one gram of tissue.
FCC ID: BQTS-RC Highest reported SAR value: . W/kg (body-worn) This device was tested for body-worn operation with the back of the device kept 0 mm from the body. To maintain FCC RF exposure compliance:
Use accessories that keep a 0 mm separation between the body and the back of the device. Belt clips, holsters, and similar accessories must not contain metal components. Avoid using accessories that do not meet these requirements.
การผ่าตัดแบบสวมร่างกาย
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0 mm must be maintained between the user’s body and the device, including the antenna.
Third-party belt clips, holsters, and similar accessories used with this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
-