FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productข้อมูลจำเพาะ

  • ชื่อสินค้า :
    FlySpark F4 V1 BLS 60A สแต็ค
  • คุณสมบัติ AI:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • การสนับสนุนซอฟต์แวร์:
    Betaflight, INAV, Ardupilot, EMU-flight, SkyBrush
  • ESC Communication:
    BLHeli_S บลูทูธและ USB-C
  • การเชื่อมต่อ:
    3-6S LiPo
  • มิติ:
    47.8มม. (ยาว) x 47.5มม. (กว้าง) x 18.3มม. (สูง)
  • การติดตั้ง:
    30.5 x 30.5 มม. ขนาดรู 4 มม
  • น้ำหนัก:
    34กรัม

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

คำแนะนำการใช้ผลิตภัณฑ์

ตัวควบคุมการบิน FlySpark F4 V1

เค้าโครง:
Refer to the user manual for the layout of the flight controller.

การเชื่อมต่ออุปกรณ์ต่อพ่วง:
Connect peripherals as per the provided diagram.

การกำหนดค่าแอปและ FC:
Use the recommended apps and follow the configuration instructions.

อัพเดตเฟิร์มแวร์ FC:
Connect the flight controller to a PC via USB for firmware updates.

ฟลายสปาร์ก BLS 60A 4-IN-1 ESC

เค้าโครง:
Check the layout guide in the manual for proper installation.

การเชื่อมต่อกับมอเตอร์และสายไฟ:
Connect motors and power cables securely.

การกำหนดค่า ESC:
Use the FlySpark app for ESC configuration settings.

อัพเดตเฟิร์มแวร์ ESC:
Follow the provided steps to update the firmware for ESC.

FlySpark F4 V1 BLS 60A สแต็คFlySpark-F4-V1-Stack-Flight-Controller-fig-1

สเปกเกินviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

บรรจุุภัณฑ์FlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • ตัวเก็บประจุ ESR ต่ำ 35V 1000uF x 1
  • น็อตไนล่อน M3 x 4
  • สายเคเบิล SH 1.0 มม. ยาว 25 มม. 8 พิน (สำหรับการเชื่อมต่อ FC-ESC) x 1 สายเคเบิล SH 1.0 มม. ยาว 75 มม. 6 พิน* x 1
  • สกรูอินเนอร์-หกเหลี่ยม M3*30 มม. x 4
  • สาย DJI 6 พิน (80 มม.) x 1
  • สายไฟ XT60 (100 มม.) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

แผนผังการเชื่อมต่อ FCFlySpark-F4-V1-Stack-Flight-Controller-fig-6

คำแนะนำการเชื่อมต่อ FC และ ESC

วิธีที่ 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

วิธีที่ 2:

การบัดกรีโดยตรง

  • บัดกรีสายไฟ 8 เส้นเข้ากับแผ่น 8 แผ่นที่ปลายแต่ละด้าน โดยปฏิบัติตามคำจำกัดความของแผ่นด้านล่างFlySpark-F4-V1-Stack-Flight-Controller-fig-8

ข้อมูลจำเพาะของตัวควบคุมการบิน

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • ใช้สาย 6 พินที่มาพร้อมกับ O3 Air Unit FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • ใช้สายเคเบิล 6 พินมาพร้อมกับ FlySpark F4 V1 BLS 60A Stack

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an exampเล.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

บันทึก:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

การเชื่อมต่อกับมอเตอร์และสายไฟFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC อัพเดตเฟิร์มแวร์
ESC 8A 50 บิตนี้มาพร้อมเฟิร์มแวร์ BLHeliS ที่โหลดไว้ล่วงหน้าแล้ว แต่ยังสามารถแฟลชเป็นเฟิร์มแวร์ Bluejay ได้ด้วย ซึ่งรองรับการกรอง RPM และรองรับ Dshot แบบสองทิศทาง ทำตามขั้นตอนเหล่านี้เพื่ออัปเดตเฟิร์มแวร์:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. เชื่อมต่อกับพีซี:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

ข้อควรระวัง:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

คำถามที่พบบ่อย

ฉันจะอัปเดตเฟิร์มแวร์ ESC ได้อย่างไร?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

เอกสาร / แหล่งข้อมูล

FlySpark F4 V1 Stack Flight Controller [พีดีเอฟ] คู่มือการใช้งาน
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

อ้างอิง

ฝากความคิดเห็น

ที่อยู่อีเมลของคุณจะไม่ถูกเผยแพร่ ช่องที่ต้องกรอกข้อมูลมีเครื่องหมาย *