Provider of radio frequency wireless control solutions, specializing in LED strip lighting controllers, dimmers, and remote automation devices.
RF Wireless represents a specialized category of radio frequency control devices widely used in home automation and LED lighting applications. The brand encompasses a variety of wireless LED controllers, RGB strip remotes, and dimming modules designed for seamless integration with modern lighting systems. These products typically utilize frequencies such as 2.4GHz or 433MHz to provide reliable wireless signal transmission, eliminating the need for complex signal wiring in residential and commercial setups.
Common products found under the RF Wireless label include the P Series Easilight controllers and DZE series RGB driver modules. These devices are capable of managing single-color, RGB, RGBW, and RGBCW LED strips with features like soft-on fading, multi-zone synchronization, and programmable dynamic modes. Known for their versatility and card-type remotes, RF Wireless components are frequently used to create custom lighting atmospheres with adjustable speed, brightness, and color saturation.
คู่มือล่าสุดจาก manuals+ คัดสรรมาเพื่อแบรนด์นี้
คำถามที่พบบ่อยเกี่ยวกับคู่มือ การลงทะเบียน และการสนับสนุนสำหรับแบรนด์นี้
Typically, you must short press the 'ID learning' button on the controller unit. The load indicator will flash. Within 10 seconds, press a key on the remote (such as the Power button or a Zone key) until the indicator flashes quickly and stays on, indicating a successful pair.
To delete all paired remotes, press and hold the controller's ID learning button for approximately 6 seconds. The load light will usually flash quickly several times and then stay on to confirm the codes have been cleared.
Signal interference can reduce range. Avoid installing the receiver near large metal objects, corners, or inside metal enclosures. Ensure the distance between the product and metal structures is at least 15cm, and do not stack controllers on top of each other.
Many RF Wireless controllers support standard constant voltage LED strips including single color (DIM), color temperature (CT), RGB, RGBW, and RGBCW models, depending on the specific controller model (e.g., P Series).