ไฮเกอร์ HG273

hygger 150W Submersible Aquarium Heater User Manual

รุ่น: HG273 | ยี่ห้อ: hygger

คำแนะนำด้านความปลอดภัยที่สำคัญ

สินค้าเกินview

The hygger 150W Submersible Aquarium Heater (Model HG273) is designed to provide stable and consistent heating for 20-30 gallon freshwater or saltwater aquariums. It features a digital temperature controller for precise temperature management and includes advanced safety features such as overheat and out-of-water protection.

คุณสมบัติหลัก:

เนื้อหาแพ็คเกจ

ข้อมูลจำเพาะ

คุณลักษณะค่า
ชื่อรุ่นHG273
พลัง150วัตต์
ขนาดตู้ปลา20-30 แกลลอน
ช่วงอุณหภูมิ59-93°ฟาเรนไฮต์ (15-34°เซลเซียส)
ความแม่นยำของอุณหภูมิ0.5°ฟาเรนไฮต์ (0.5°เซลเซียส)
ความทนต่ออุณหภูมิ± 1 ° F (± 1 ° C)
Heating Rod Size8.1" x 1.06"
เล่มที่tageไฟฟ้ากระแสสลับ 110-120V/60Hz (มาตรฐานสหรัฐอเมริกา)
ความยาวสายไฟ2.6ft + 3.9ft / 0.8m + 1.2m
น้ำหนักสินค้า13.1 ออนซ์
วัสดุExplosion-proof Quartz Glass

การตั้งค่า

Follow these steps to properly install your hygger aquarium heater:

  1. แกะ: Carefully remove the heater and controller from the packaging. Inspect for any damage.
  2. การจัดวาง: Position the heater fully submerged in your aquarium. It can be placed vertically or horizontally. Ensure the heater is at least 5cm below the water surface.
  3. ปลอดภัย: Use the included strong suction cups to firmly attach the heater to the inside wall of your tank.
  4. ตำแหน่งการวางตัวควบคุม: Place the digital temperature controller outside the aquarium in a dry location. Remember, the controller is not waterproof.
  5. การเชื่อมต่อไฟฟ้า: Once the heater is securely placed and fully submerged, plug the power cord into a suitable electrical outlet.
Diagram showing correct vertical and horizontal placement of the hygger aquarium heater, emphasizing full submersion and keeping the controller dry.
Image: Proper placement of the hygger aquarium heater, illustrating both vertical and horizontal installation methods. Ensure the heater is fully submerged and the controller remains dry.
Close-up images highlighting the strong suction cups, water sensor for auto-shutoff, protective shell, and explosion-proof quartz sand glass features of the hygger aquarium heater.
ภาพ: รายละเอียด view of the heater's components, including suction cups for secure mounting, the water sensor for safety, the protective shell, and the explosion-proof quartz glass construction.

คำแนะนำการใช้งาน

Your hygger aquarium heater is designed for easy operation with its external digital controller.

การตั้งค่าอุณหภูมิ:

  1. Upon power connection, the controller will display the real-time water temperature.
  2. Press the "SET" button briefly to increase the preset temperature. Each press will cycle through the available temperature range (59-93°F).
  3. Once your desired temperature is displayed, stop pressing the "SET" button. The display will flash briefly and then return to showing the actual water temperature. The set temperature is now saved.

ไฟแสดงสถานะ:

Close-up of the digital temperature controller showing temperature setting, indicator lights, and instructions for setting the desired temperature.
Image: The external digital controller, illustrating how to set the desired temperature and the meaning of the red (heating) and green (standby) indicator lights.

วิดีโอสินค้า:

Video: An official product video demonstrating the features and operation of the hygger Small Aquarium Heater, including installation and temperature setting.

การซ่อมบำรุง

การบำรุงรักษาอย่างเหมาะสมจะช่วยให้เครื่องทำความร้อนของคุณมีอายุการใช้งานยาวนานและทำงานได้อย่างมีประสิทธิภาพ

การแก้ไขปัญหา

If you encounter issues with your hygger aquarium heater, refer to the following common problems and solutions:

รหัสข้อผิดพลาด / อาการคำอธิบายสารละลาย
"ER" displayed on controllerHeater is out of water or water level is too low (dry-run protection activated).Ensure the heater is fully submerged in water. If the water level is low, add water to the tank. The heater will resume normal operation once fully submerged.
"EE" displayed on controllerWater temperature exceeds 97°F (overheat protection activated).Check the ambient room temperature. If the tank is in a warm environment, consider moving it or using a chiller. The heater will stop heating until the temperature drops below the safety threshold.
เครื่องทำความร้อนไม่ร้อนThe red indicator light is off, and the water temperature is below the set point.Check if the heater is plugged in correctly. Verify the set temperature is higher than the current water temperature. Ensure there are no error codes displayed. If issues persist, contact customer support.
Image showing the hygger aquarium heater displaying 'Er' error code when partially out of water, demonstrating dry-run protection.
Image: The heater's controller displaying the "Er" error code, indicating that the heater is not fully submerged in water.
Image showing the hygger aquarium heater displaying 'EE' error code when water temperature exceeds 97°F, demonstrating overheat protection.
Image: The heater's controller displaying the "EE" error code, indicating that the water temperature has exceeded 97°F.

การรับประกัน

This hygger aquarium heater comes with a การรับประกันจากผู้ผลิต 2 ปี. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, or unauthorized repair.

สนับสนุน

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact hygger customer support through the retailer where the product was purchased or visit the official hygger webเว็บไซต์สำหรับข้อมูลการติดต่อ