Igloo Profile II Series 38-Can Roller Cooler Instruction Manual

1. บทนำ

This instruction manual provides essential information for the safe and effective use of your Igloo Profile II Series 38-Can Roller Cooler. Please read this manual thoroughly before using the product and retain it for future reference. This cooler is designed for keeping food and beverages cold during outdoor activities, travel, and events.

รูปที่ 1: ด้านหน้า view of the Igloo Profile II Series 38-Can Roller Cooler.

2. สินค้าหมดview

2.1 คุณสมบัติหลัก

• Wheeled Design: Equipped with durable wheels for easy transport.
• ที่จับเหลื่อม: Locking, telescoping handle allows for pushing or pulling and includes gear hangers for additional items.
• Cool Riser Technology: Elevated design to improve cooling performance by minimizing contact with hot surfaces.
• Integrated Pouring Channels: Liner features built-in channels for convenient draining of melted ice.
• Molded-in Side Handles: Provides additional grip points for easy lifting and unloading.

2.2 ส่วนประกอบ

Your Igloo Profile II Series Roller Cooler consists of the following main components:

• Cooler Body (Insulated)
• ฝา
• ล้อ (2)
• Telescoping Handle Assembly
• Molded-in Side Handles (2)

รูปที่ 2: ด้านข้าง view of the cooler with the telescoping handle extended.

รูปที่ 3: ย้อนกลับ view of the cooler, showing the fully extended telescoping handle.

3. การตั้งค่า

3.1 การเตรียมการเบื้องต้น

1. แกะ: นำวัสดุบรรจุภัณฑ์ทั้งหมดออก และตรวจสอบกล่องเก็บความเย็นว่ามีรอยชำรุดเสียหายหรือไม่
2. ทำความสะอาด: Before first use, wash the interior and exterior of the cooler with mild soap and warm water. Rinse thoroughly and allow to air dry.
3. Pre-chill (Optional but Recommended): For optimal performance, pre-chill the cooler by placing a bag of ice or ice packs inside for a few hours before loading your items.

4. คู่มือการใช้งาน

4.1 Loading the Cooler

• Place items that need to stay coldest at the bottom.
• Use block ice for longer retention or cubed ice for faster cooling.
• Fill the cooler as much as possible with ice and contents to minimize air space, which helps maintain cold temperatures.
• Close the lid securely after loading to ensure a tight seal.

4.2 การขนส่งเครื่องทำความเย็น

Figure 4: Demonstrating easy transport of the cooler using its wheels and telescoping handle.

1. ยืดด้ามจับ: Press the button on the handle grip and pull upwards to extend the telescoping handle to a comfortable height. Ensure it locks into place.
2. ม้วน: Tilt the cooler slightly and pull or push it using the extended handle. The durable wheels are designed for various terrains.
3. ยก: For lifting over obstacles or into vehicles, use the molded-in side handles. Ensure a firm grip, especially when the cooler is full.

4.3 การเพิ่มการกักเก็บน้ำแข็งให้สูงสุด

Figure 5: The cooler open, highlighting its insulated interior for effective cooling.

• Keep the lid closed as much as possible to prevent cold air from escaping.
• Store the cooler in a shaded area, away from direct sunlight.
• การใช้ประโยชน์จาก Cool Riser Technology by placing the cooler on an elevated surface when possible, to further reduce heat transfer from the ground.

Figure 6: Visual representation of key features including Cool Riser Technology, wheels, and telescoping handle. Note: This model uses integrated pouring channels for draining, not a traditional drain plug, despite some visual representations.

5. การบำรุงรักษา

5.1 การทำความสะอาด

• After each use, empty all contents and melted ice.
• Clean the interior and exterior with mild soap and warm water. For stubborn stains, a baking soda paste can be used.
• ล้างให้สะอาดเพื่อขจัดคราบสบู่ที่เหลือออกให้หมด
• Ensure the cooler is completely dry before storing to prevent mold or mildew growth.

5.2 Draining Melted Ice

This cooler features integrated pouring channels in the liner. To drain melted ice, simply tilt the cooler and pour the water out through the opening. There is no separate drain plug.

5.3 พื้นที่จัดเก็บ

• Store the cooler in a cool, dry place, away from direct sunlight.
• For long-term storage, leave the lid slightly ajar to allow for air circulation and prevent odors.

6 การแก้ไขปัญหา

6.1 Poor Ice Retention

• ตรวจสอบซีลฝาปิด: Ensure the lid is closed tightly and the seal is free of debris.
• Pre-chill: Always pre-chill the cooler before adding contents and ice.
• Fill Completely: A full cooler retains cold better than a partially filled one. Use extra ice or towels to fill empty space.
• ที่ตั้ง: Keep the cooler in the shade and off hot surfaces (utilize Cool Riser Technology).

6.2 Handle Issues

• Sticking Handle: Ensure the handle mechanism is clean and free of dirt or sand. Light lubrication with a silicone-based spray can help if needed.
• Handle Not Locking: Verify that the handle is fully extended or retracted until it clicks into its locked position.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

8.1 การรับประกันของผู้ผลิต

This Igloo cooler is covered by a รับประกันจากผู้ผลิต 1 ปี from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, or unauthorized modifications.

8.2 การสนับสนุนลูกค้า

For warranty claims, technical assistance, or general inquiries, please visit the official Igloo store or contact their customer service department. You can find more information and contact details at the Igloo Brand Store on Amazon.