1. บทนำ
This manual provides essential information for the safe and efficient operation of your DIHOOL Electric Lift Table, Model JP-DHLCE-S395A. Please read this manual thoroughly before installation and use to ensure proper function and to prevent injury or damage. Keep this manual for future reference.
2. ข้อมูลด้านความปลอดภัย
คำเตือน: การไม่ปฏิบัติตามคำแนะนำด้านความปลอดภัยเหล่านี้อาจส่งผลให้เกิดการบาดเจ็บร้ายแรงหรือความเสียหายต่อทรัพย์สิน
- Always ensure the lift table is placed on a stable, level surface before operation.
- Do not exceed the maximum load capacity of 200 kg (450 lbs). Overloading can cause damage to the unit and potential hazards.
- Keep hands, feet, and clothing clear of moving parts during operation to avoid pinching or crushing injuries.
- Ensure all power connections are secure and correctly wired according to the instructions.
- ตัดการเชื่อมต่อไฟฟ้าก่อนดำเนินการบำรุงรักษา ทำความสะอาด หรือปรับแต่งใดๆ
- Avoid continuous operation for more than 20 minutes. If the load exceeds 150 kg (330 lbs), continuous operation should not exceed 10 minutes to prevent overheating.
- Do not apply lateral force to the lift column, especially during ceiling installation, as this can cause instability and damage.
- If using for a desktop, ensure the desktop size does not exceed 80cm x 80cm. For larger desktops, using two lift columns is recommended. Always center the load on the desktop.
3. ส่วนประกอบผลิตภัณฑ์
The DIHOOL Electric Lift Table system typically includes the following components:
- Electric Lift Column (Model JP-DHLCE-S395A)
- DC Motor Controller (IPS-S2)
- Power Supply (AC Adapter or other compatible power sources)
- Remote Controller (optional, if purchased separately)
- Handle Controller (optional, if purchased separately)
- Mounting Hardware (M8*20 bolts, M8 nuts, M5*25 screws)
Refer to the 'Accessories Description' image for details on mounting hardware:
Image: Accessories Description. This image illustrates the included M8*20 bolts (8pcs), M8 nuts (8pcs), and M5*25 screws (16pcs). It also shows how to install the lift column to a wooden board using M5*25 screws and to a steel plate using M8*20 bolts and M8 nuts.
4. ข้อมูลจำเพาะ
The following table details the technical specifications for the DIHOOL Electric Lift Table, Model JP-DHLCE-S395A:
| พารามิเตอร์ | ค่า |
|---|---|
| แบบอย่าง | JP-DHLCE-S395A |
| Initial Height | 370มม. / 14.6นิ้ว |
| Final Height | 765มม. / 30.1นิ้ว |
| ความสูงของโรคหลอดเลือดสมอง | 395มม. / 15.6นิ้ว |
| ส่วน | 3 |
| เล่มที่tage | กระแสตรง20-32โวลต์ |
| ความเร็วขณะเดินเครื่องเปล่า | 10มม./วินาที |
| ความจุในการรับน้ำหนักสูงสุด | 200กก. / 450ปอนด์ |
| Self-Locking Force | 2500N (250KG) / 550LB |
| อุณหภูมิในการทำงาน | -10°C ~ +60°C |
| ลิมิตสวิตช์ | ในตัว |
| ความถี่ในการใช้งาน | 10% Work System, Max 20 Minutes Continuous Working |
| วัสดุ | Body Aluminum, Panel Iron |
| บันทึก | If load > 150KG (330LB), it cannot work continuously for more than 10 minutes. |
For a visual representation of the dimensions and parameters, refer to the image below:
Image: Parameters. This image displays a detailed table of specifications and a technical drawing illustrating the dimensions of the lift column, including initial height, final height, and stroke height for various models, with the DHLCE-S395A highlighted.
The lift column features a 3-section sleeve lifting structure made of alumina alloy material, treated with anodizing for corrosion, wear, and weather resistance. It also includes a built-in limit switch to prevent damage from over-extension.
Image: Lift Column Features. This image highlights the 3-section sleeve lifting structure, alumina alloy material, built-in limit switch, and quiet operation (30dB) of the lift column.
5. การตั้งค่าและการติดตั้ง
Carefully follow these steps for proper installation of your electric lift table.
5.1 Mounting the Lift Column
The lift column can be installed in various configurations. Ensure the mounting surface is strong enough to support the lift table and its maximum load.
Image: How to install in different environments. This image illustrates four installation methods: Forward Installation, Reverse Installation, Ceiling Installation, and Lateral Installation, with important notes for each.
- Forward Installation: Mount the lift column vertically with the top plate facing upwards. Ensure the desktop size does not exceed 80cm x 80cm. For larger desktops, use two columns. Always place the load's center of gravity at the center of the desktop.
- การติดตั้งแบบย้อนกลับ: Mount the lift column vertically with the top plate facing downwards. Similar desktop size and load centering recommendations apply.
- การติดตั้งฝ้าเพดาน: Use specialized expansion screws for installation. If the lift is suspended from the ceiling, adjust the parameters for up and down operating current. The load capacity for ceiling installation is less than 140KG. Do not apply lateral force.
- การติดตั้งด้านข้าง: Side mounting is prohibited. Any damage resulting from side mounting will not be covered under warranty.
5.2 Connecting the Controller and Power Supply
The lifting column is pre-wired for ease of use. Simply connect the power supply and controller.
Image: Multiple Power Supply Methods. This image shows various ways to power the lift table, including AC adapter (AC120V/AC240V), automotive power receptacle (DC12V input with booster for DC24V output), storage battery (DC24V), and power bank (>100W PD3.0/PD3.1).
- Connect the DC motor controller to the lift column.
- Connect the power supply to the DC motor controller. The system supports 12V, 20V-30V, 110V, or 220V power sources.
- If using a 12V power source, the actuator operates at 5mm/s with a maximum load capacity of 100kg. A boost converter (12V to 24V) can be used for full power operation.
- Connect the remote or handle controller to the DC motor controller if applicable.
6. คู่มือการใช้งาน
The DIHOOL Electric Lift Table offers various control methods for precise height adjustment.
6.1 การทำงานพื้นฐาน
Use the connected controller (remote, handle, or IPS-S2) to adjust the height of the lift table. Typically, there are 'Up' and 'Down' buttons for simple height adjustments.
6.2 Controller Settings (IPS-S2)
The IPS-S2 DC Motor Controller allows for advanced settings and programmable functions. Refer to the 'Controller Description' image for button layout and function details.
Image: Controller Description. This image provides an overview of the IPS-S2 DC Motor Controller, including its display, WiFi indicator, pairing button, and detailed tables for Function F1 (Motor Protection Settings), Function F2 (Signal Operation Settings), and Function F3 (Automatic Operation Settings).
- Function F1: Motor Protection Settings
Press and hold the F1 key for 3 seconds to enter the setting. Use the Up/Down buttons to switch between sub-functions and adjust values. This function allows setting parameters like current limit, running time, and voltagอี ลด - Function F2: Signal Operation Settings
Press and hold the F2 key for 3 seconds to enter the F2 sub-section settings. Click F2 to switch between sub-functions. This function controls parameters related to motor working time, pause time, and signal stopping. - Function F3: Automatic Operation Settings
Press and hold the F3 key for 3 seconds to enter the F3 sub-function settings. Click F3 to switch between sub-functions. This function allows programming automatic lifting cycles, including up working time, down working time, pause time, and number of cycles.
The system also supports remote control, handle control, IPS-S2 controller, and WiFi control. Additionally, Function F3 allows programmable automatic lifting, and IN2 IN3 I/O signal control buttons and Function F2 photoelectric switch control can be purchased separately.
7. การบำรุงรักษา
Regular maintenance ensures the longevity and optimal performance of your DIHOOL Electric Lift Table.
- การทำความสะอาด: Wipe down the lift column and controller with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- การตรวจสอบ: Periodically check all bolts and connections to ensure they are secure. Inspect the power cable for any signs of wear or damage.
- การหล่อลื่น: The internal mechanisms are generally maintenance-free. Do not attempt to lubricate internal components unless specifically instructed by DIHOOL support.
- การจัดการโหลด: Always operate within 80% of the maximum load capacity (160kg / 352lbs) for extended product life.
8 การแก้ไขปัญหา
If you encounter issues with your electric lift table, refer to the following common problems and solutions:
- Lift Table Not Moving:
- Check if the power cable is securely connected to both the power source and the controller.
- ตรวจสอบให้แน่ใจว่าแหล่งจ่ายไฟทำงานอยู่และจ่ายแรงดันไฟฟ้าที่ถูกต้องtagอี (DC20-32V)
- Verify that the controller is properly connected to the lift column.
- Check for any obstructions preventing movement.
- If the controller display shows an error code, consult the controller's specific manual or contact support.
- เสียงรบกวนที่ผิดปกติระหว่างการทำงาน:
- Ensure the load is evenly distributed and not exceeding the maximum capacity.
- Check for any loose mounting hardware.
- If the noise persists, discontinue use and contact support.
- การทำงานเป็นระยะ:
- This could indicate an overheating issue. Allow the unit to cool down if it has been operating continuously for an extended period, especially with heavy loads. Remember the 20-minute (or 10-minute for heavy loads) continuous operation limit.
- ตรวจสอบการเชื่อมต่อที่หลวม
For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact DIHOOL customer support.
9. การรับประกันและการสนับสนุน
For warranty information, please refer to the documentation provided with your purchase or contact the seller directly. DIHOOL is committed to providing quality products and support.
If you require technical assistance, have questions about installation, operation, or maintenance, please contact DIHOOL customer support through the retailer where you purchased the product or visit the official DIHOOL store on Amazon:
