TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer

1. บทนำ

The TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73) is designed for precise temperature monitoring in refrigerators, freezers, water baths, heating blocks, and incubators. This device simultaneously displays current, minimum, and maximum temperatures, offering a comprehensive overview of environmental conditions. Its built-in memory stores temperature data, and programmable alarms provide alerts for critical temperature deviations.

คุณสมบัติหลัก:

• Simultaneous display of current, minimum, and maximum temperatures.
• Built-in memory for tracking temperature conditions over time.
• Precise high and low temperature alarms, adjustable in 1° increments.
• Submersible temperature probe with a 10-ft (3-m) micro-cable.
• Multiple mounting options: hook-and-loop strips, wall-mount slots, or flip-open stand.
• NIST-traceable calibration certificate included.

2. เนื้อหาบรรจุภัณฑ์

Verify that all items listed below are present and in good condition:

• TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73)
• 1 5-mL Bottle Probe (submersible)
• ใบรับรองการสอบเทียบที่ตรวจสอบย้อนกลับได้ตามมาตรฐาน NIST พร้อมข้อมูล
• Hook-and-loop strips for mounting
• Magnetic strips for mounting
• แบตเตอรี่อัลคาไลน์ AAA หนึ่งก้อน

3. การตั้งค่า

3.1. การติดตั้งแบตเตอรี่

1. ค้นหาช่องใส่แบตเตอรี่ที่ด้านหลังของเครื่อง
2. ถอดฝาช่องใส่แบตเตอรี่ออก
3. Insert the supplied AAA alkaline battery, ensuring correct polarity (+/-).
4. ใส่ฝาปิดช่องใส่แบตเตอรี่กลับเข้าที่อย่างแน่นหนา

3.2. การวางตำแหน่งหัววัด

The bottle probe is designed to buffer rapid temperature changes, providing a more stable and accurate reading of the stored contents. The 10-ft (3-m) micro-cable allows the probe to be placed inside the monitored environment while the main unit remains outside.

• Place the bottle probe inside the refrigerator, freezer, or other environment where temperature monitoring is required. Ensure the probe is positioned to accurately reflect the temperature of the items being stored.
• The micro-cable is thin enough to allow refrigerator or freezer doors to close without damaging the cable or compromising the seal.

Image: A person placing a bottle probe inside a refrigerator, demonstrating proper probe placement.

3.3. การติดตั้งยูนิตหลัก

The main thermometer unit can be mounted in several ways:

• Hook-and-Loop Strips: Attach the adhesive-backed hook-and-loop strips to the back of the unit and a clean, flat surface (e.g., side of a refrigerator, wall).
• Magnetic Strips: Use the magnetic strips for attachment to metallic surfaces.
• Wall-Mount Slots: Utilize the integrated slots on the back of the unit to hang it on screws or hooks.
• Flip-Open Stand: For benchtop use, extend the integrated stand on the back of the unit.

Image: A hand pressing a button on the TRACEABLE thermometer, which is mounted on the exterior of a refrigerator.

4. คู่มือการใช้งาน

4.1. เปิด/ปิดเครื่อง

The unit powers on automatically upon battery installation. There is no dedicated power button. To turn off, remove the battery.

4.2. การอ่านค่าอุณหภูมิ

The large LCD display shows three temperature readings simultaneously:

• อุณหภูมิปัจจุบัน: The real-time temperature measured by the probe.
• อุณหภูมิต่ำสุด (MIN): อุณหภูมิต่ำสุดที่บันทึกไว้ตั้งแต่การรีเซ็ตครั้งล่าสุด
• อุณหภูมิสูงสุด (MAX): อุณหภูมิสูงสุดที่บันทึกไว้ตั้งแต่การรีเซ็ตครั้งล่าสุด

4.3. Switching Temperature Units (°F/°C)

กดปุ่ม °ฟาเรนไฮต์/°เซลเซียส button (if available, or a similar labeled button) to toggle between Fahrenheit and Celsius temperature scales.

4.4. Viewing and Clearing Min/Max Memory

The thermometer automatically records the minimum and maximum temperatures reached since the last memory reset. These values are continuously displayed.

• To clear the MIN/MAX memory and begin a new recording cycle, press the ชัดเจน button. The display will show the current temperature for MIN and MAX until new minimum and maximum values are recorded.

4.5. การตั้งปลุก

The thermometer features programmable high and low temperature alarms. An alarm will sound when the temperature exceeds the high set point or falls below the low set point. The alarm continues to sound even if the temperature returns to the non-alarm range until acknowledged.

1. กดปุ่ม ชุด ปุ่มเพื่อเข้าสู่โหมดการตั้งค่าการเตือน
2. ใช้ UP และ ลง arrow buttons to adjust the desired high temperature alarm limit.
3. กด ชุด again to confirm the high limit and proceed to set the low temperature alarm limit.
4. ใช้ UP และ ลง arrow buttons to adjust the desired low temperature alarm limit.
5. กด ชุด a third time to exit alarm setting mode and save the settings.
6. To enable or disable the alarm, press the เปิด / ปิดนาฬิกาปลุก button. An alarm icon will typically appear on the display when the alarm is active.
7. To silence a sounding alarm, press any button. The alarm will reactivate if the temperature remains outside the set limits.

5. การบำรุงรักษา

5.1. การทำความสะอาด

Regular cleaning helps maintain the accuracy and longevity of your thermometer.

• Wipe the main unit and probe with a damp cloth. A mild soap solution can be used if necessary.
• Do not use abrasive cleaners or solvents, as these may damage the plastic casing หรือจอแสดงผล
• Ensure the main unit does not get wet, as it is not waterproof. The probe is submersible.

5.2. การเปลี่ยนแบตเตอรี่

When the display becomes dim or the unit stops functioning, it is time to replace the battery. Refer to Section 3.1 for battery installation instructions.

5.3. Probe Care

The bottle probe is designed for durability. Avoid sharp bends or kinks in the cable, which could damage the internal wiring. The probe is freezer safe and can remain in the monitored environment continuously.

6 การแก้ไขปัญหา

If your thermometer is not functioning as expected, please refer to the following common issues and solutions:

7. ข้อมูลจำเพาะ

8. การรับประกัน

This TRACEABLE product is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage caused by accident, misuse, abuse, alteration, or improper operation. If service is required during the warranty period, please contact customer support.

9. การสนับสนุนลูกค้า

For technical assistance, warranty claims, or general inquiries, please contact TRACEABLE customer support. Refer to the contact information provided with your purchase documentation or visit the official TRACEABLE webเว็บไซต์สำหรับรายละเอียดการสนับสนุนล่าสุด

แหล่งข้อมูลออนไลน์:

• เยี่ยมชม ติดตามได้ webเว็บไซต์ for product information, FAQs, and additional resources.