Donner Adjustable Piano Bench EC7163 Instruction Manual

การแนะนำ

Thank you for choosing the Donner Adjustable Piano Bench, Model EC7163. This manual provides essential information for the proper assembly, operation, maintenance, and care of your piano bench. Please read these instructions thoroughly before use to ensure safe and optimal performance.

ข้อมูลด้านความปลอดภัย

• Always assemble the bench according to the provided instructions.
• ห้ามบรรทุกน้ำหนักเกินขีดจำกัดสูงสุดที่ 400 ปอนด์ (181 กิโลกรัม)
• To maintain the finish, avoid exposure to direct sunlight.
• Always keep the bench on a stable, level surface to prevent tipping.
• Be aware of the blue lubricant on the lifting mechanism during initial adjustments. It may transfer to surfaces if not wiped clean.

เนื้อหาแพ็คเกจ

ตรวจสอบว่าส่วนประกอบทั้งหมดอยู่ครบก่อนเริ่มประกอบ:

• Piano Bench Seat with integrated lifting mechanism
• 4 x Bench Legs
• ฮาร์ดแวร์สำหรับติดตั้ง (สลักเกลียว, แหวนรอง, น็อต)
• Wrench for assembly

คำแนะนำในการประกอบ

Assembly of the Donner Adjustable Piano Bench is straightforward and requires minimal tools. Follow these steps:

1. Turn the piano bench seat upside down, ensuring the bottom is facing upwards.
2. Align each leg with the corner brackets on the underside of the bench.
3. Insert the bolts through the leg and bracket, then thread the washers onto the bolts.
4. Thread the nuts onto the bolts.
5. Using the provided wrench, tighten all nuts securely. Ensure all legs are firmly attached and stable.

คำแนะนำการใช้งาน

Adjusting Bench Height

The Donner Adjustable Piano Bench features a metal lifting mechanism that allows for height adjustment. The seat height can be adjusted within a range of 18.9 inches (48 cm) to 22.8 inches (58 cm).

1. Locate the adjustment knobs on both sides of the bench seat.
2. Turn the knobs to raise or lower the seat to your desired height. Ensure both knobs are turned evenly to maintain a level seat.
3. Once the desired height is achieved, ensure the knobs are tightened sufficiently to secure the seat in place.

การซ่อมบำรุง

การทำความสะอาด

• For the wooden frame, use a soft, dry cloth to wipe away dust and dirt. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• For the high-density sponge cushion, use a slightly damp cloth with mild soap if necessary, then wipe dry immediately. Do not saturate the cushion.
• Regularly check the metal lifting mechanism for any dust or debris that might impede smooth operation.

การดูแลทั่วไป

• Periodically inspect all bolts and connections to ensure they remain tight. Retighten if necessary.
• Keep the bench away from extreme temperature changes and high humidity to prevent warping or damage to the wood.
• The non-slip rubber pads on the legs help protect your floor and provide stability. Ensure they are clean and intact.

การแก้ไขปัญหา

Bench Feels Unstable

• Ensure all leg bolts are securely tightened.
• Verify that the bench is placed on a flat, level surface. Uneven floors can cause instability.
• Check the non-slip pads on the bottom of the legs for wear or damage. Replace if necessary.

Difficulty Adjusting Height

• Ensure both adjustment knobs are loosened sufficiently before attempting to change the height.
• Check for any obstructions in the lifting mechanism.
• Apply a small amount of silicone-based lubricant to the metal parts of the lifting mechanism if it feels stiff. Wipe away any excess lubricant, especially the blue lubricant that may be present from manufacturing, to prevent staining.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For warranty information, technical support, or any inquiries regarding your Donner Adjustable Piano Bench, please visit the official Donner webหรือติดต่อฝ่ายบริการลูกค้า เก็บใบเสร็จรับเงินไว้เพื่อใช้ในการเคลมประกัน

เยี่ยมชมร้าน Donner บน Amazon