Dreo TurboPoly Fan 306 Instruction Manual (DR-HPF006)

1. การติดตั้งและการประกอบ

The Dreo TurboPoly Fan 306 is designed for straightforward assembly. Follow these steps to get your fan ready for use:

1. Attach the Column to the Base: Turn the column upside down. Align the column's bottom cutout onto the center jutting point of the base, then push it in.
2. ยึดเสาให้แน่น: Place the flat washer first, insert the screw, then tighten clockwise with the included screwdriver to secure the column to the base.
3. Insert Fan Body: Turn the assembled base and column right side up. Insert the fan body to the column, and rotate clockwise until tightened.
4. ปรับความสูง: Rotate the adjustment collar counterclockwise to adjust the height, then clockwise to secure it in place. The fan's height is adjustable between 33.8 and 41.3 inches.
5. Attach Remote Holder: Attach the remote control holder below the fan head and pedestal joint for convenient storage.

The fan's detachable design allows for easy assembly and disassembly, simplifying initial setup and future maintenance.

2. คู่มือการใช้งาน

The Dreo TurboPoly Fan 306 offers intuitive controls both on its top panel and via a convenient remote control. Familiarize yourself with the functions to optimize your comfort.

แผงควบคุมและฟังก์ชั่นการควบคุมระยะไกล:

• ปุ่มเปิด/ปิด: Turns the fan on/off. Long press for 10 seconds to restore factory settings.
• Fan Speed Button (1-3 Levels): Adjusts fan speed. Long press for 3 seconds to enter Auto Mode.
• ปุ่มสั่น: Press to activate or deactivate horizontal oscillation (80°).
• ปิดเสียง/เปิดเสียง: Silences or enables button beep sounds.
• ตัวจับเวลา: Sets a timer for automatic fan shutdown.

โหมดการทำงาน:

• โหมดปกติ: Fan runs at the fixed speed you select (1-3).
• โหมดอัตโนมัติ: Fan automatically increases speed when room temperature rises and decreases speed when temperature is lower. This mode provides a seamless comfort experience, increasing 1 wind speed whenever room temperature goes up 3°F.

การปรับทิศทางการไหลของลม:

In addition to 80° horizontal oscillation, the fan head can be manually adjusted vertically up to 90° (0°/15°/30°/45°/60°/75°/90°) to direct airflow precisely where needed.

การทำงานที่เงียบ:

The Dreo TurboPoly Fan 306 operates at a low noise level of only 25dB, making it quieter than a whisper. This ultra-quiet performance ensures minimal disturbance, ideal for bedrooms, offices, or any space requiring peaceful air circulation.

Official Product Video: How to Turn on Dreo Fan TWO WAYS!

3. การบำรุงรักษาและการทำความสะอาด

Regular cleaning ensures optimal performance and longevity of your Dreo TurboPoly Fan 306. The fan features a detachable design for easy access to components.

Cleaning the Fan Components:

1. Disassemble the Front Grill: Tilt the fan head all the way back. Locate the screw on the bottom of the fan head and remove it using a Phillips screwdriver. Twist the front grill counter-clockwise until the notch aligns with the open circle indicator, then gently pull it off.
2. Remove the Fan Blade: Twist the fan blade cap counter-clockwise to loosen and remove it. Then, carefully pull the fan blade off the motor shaft.
3. Remove the Rear Grill: Locate the two buttons on the sides of the motor housing. Push them both towards the center and twist the rear grill counter-clockwise to detach it.
4. ทำความสะอาดส่วนประกอบ: The front grill, fan blade, and rear grill can be washed with mild soap and water. Ensure all soap residue is thoroughly rinsed off and components are completely dry before reassembly.
5. ทำความสะอาดตัวเรือนมอเตอร์: Wipe down the motor housing carefully with a damp cloth, ensuring no water or cleaning solution enters the motor.
6. ประกอบกลับเข้าที่: Follow the disassembly steps in reverse order. Ensure all parts are securely reattached and the front grill is locked into place by twisting it clockwise until the notch aligns with the solid circle indicator. Replace the screw on the bottom of the fan head.

การดูแลรักษาแผ่นอโรม่า:

The fan includes a built-in aroma pad for adding fragrances. To access it, twist the center cap on the front grill counter-clockwise and pull it out. The aroma pad can be cleaned by rinsing it under water. Ensure it is completely dry before reinserting or adding essential oils.

Official Product Video: Let Me Show You How to Take it Completely Apart and Clean It!

4 การแก้ไขปัญหา

If you encounter any issues with your Dreo TurboPoly Fan 306, please refer to the following common troubleshooting tips:

• พัดลมไม่เปิด:
  • ตรวจสอบให้แน่ใจว่าสายไฟเสียบเข้ากับเต้ารับไฟฟ้าที่ใช้งานได้แน่นดี
  • Check if the power button on the fan or remote control has been pressed.
  • Verify there is no power outagอีในพื้นที่ของคุณ
• ลมพัดอ่อนหรือไม่พัดเลย:
  • เพิ่มการตั้งค่าความเร็วพัดลม
  • Ensure the fan grills and blades are clean and free from dust or obstructions. Refer to the Maintenance section for cleaning instructions.
  • Check if the fan head is properly tilted and oscillating to cover the desired area.
• Unusual noise or rattling:
  • Ensure all fan components (grills, blades, base) are securely assembled and tightened.
  • Check for any foreign objects caught within the fan blades or grills.
  • If the noise persists after checking these points, contact Dreo Support.
• การควบคุมระยะไกลไม่ทำงาน:
  • Check and replace the battery in the remote control (1 C battery required, included).
  • Ensure there are no obstructions between the remote control and the fan's receiver.
  • Try operating the fan using the control panel directly to confirm fan functionality.

For further assistance, please contact Dreo Support using the information provided in the Warranty & Support section.

5. ข้อมูลจำเพาะ

6. การรับประกันและการสนับสนุน

Dreo is committed to providing excellent customer support and product satisfaction. If you have any questions, concerns, or require assistance with your Dreo TurboPoly Fan 306, please reach out to our support team.

DREO Support Center:

• อีเมล: support@dreo.com
• Webเว็บไซต์: www.dreo.com
• โทรศัพท์: (888) 290-1688 (Mon-Fri, 9:00 AM - 5:00 PM PST/PDT)

Extend Your Warranty:

You can extend your product warranty to 30 months for free. Scan the QR code on the Quick Start Guide or visit dreo.com/warranty เพื่อลงทะเบียนผลิตภัณฑ์ของคุณ