Danfoss 077B2317L

Danfoss Thermostat 25T65 077B2317L Freezer Instruction Manual

1. บทนำ

This manual provides essential information for the installation, operation, and maintenance of the Danfoss Thermostat 25T65 077B2317L. This component is designed as a replacement part for various freezer and combined refrigerator models. Please read these instructions carefully before proceeding with installation or use to ensure proper function and safety.

2. ข้อมูลด้านความปลอดภัย

Always prioritize safety when working with electrical appliances. Improper installation or handling can lead to electric shock, injury, or damage to the appliance.

  • ตัดการเชื่อมต่อไฟฟ้า: Before any installation, maintenance, or repair, ensure the appliance is completely disconnected from the main power supply.
  • บุคลากรที่ผ่านการรับรอง: Installation and replacement should ideally be performed by a qualified technician.
  • จัดการด้วยความระมัดระวัง: The capillary tube is delicate. Avoid bending it sharply or damaging its insulation, as this can affect thermostat performance.
  • การเชื่อมต่อไฟฟ้า: Ensure all electrical connections are secure and correctly wired according to the appliance's wiring diagram.
  • สภาพแวดล้อม : Do not expose the thermostat to excessive moisture or extreme temperatures outside its operating range.

3. คำอธิบายและคุณสมบัติของผลิตภัณฑ์

The Danfoss 25T65 077B2317L is a mechanical thermostat manufactured in Europe, specifically designed for temperature control in freezers and combined refrigerators. It features a long capillary tube for precise temperature sensing and a signaling contact that activates when the temperature rises above a set point, indicating a potential issue or defrost cycle.

คุณสมบัติหลัก:

  • Model: 077B2317L
  • Capillary Length: 2600 mm
  • Electrical Connections: 6.3 mm / 4.8 mm terminals
  • Special Function: Signaling contact for temperature increase
  • Compatibility: Suitable for various models including R5351A, KB2039, K59L1137, 59KL1141, 077B6429, and 077B2317.
Danfoss Thermostat 077B2317L with capillary tube

ภาพที่ 1: เกินview of the Danfoss 077B2317L thermostat, showing the main body and the coiled capillary tube.

ด้านล่าง view of Danfoss Thermostat 077B2317L showing model number

ภาพที่ 2: ด้านล่าง view of the thermostat, clearly displaying the model number '077B2317L' and other markings.

4. การตั้งค่าและการติดตั้ง

The installation of a replacement thermostat requires careful attention to detail. It is recommended that this procedure be carried out by a qualified appliance repair technician.

  1. การตัดการเชื่อมต่อไฟฟ้า: Unplug the freezer or refrigerator from the electrical outlet to ensure no power is supplied to the unit.
  2. เข้าถึงเทอร์โมสตัทเก่า: Locate and carefully remove the access panel or housing that covers the existing thermostat.
  3. การเชื่อมต่อเอกสาร: Before disconnecting, take clear photos or make a diagram of the wiring connections to the old thermostat. Note the position of each wire (e.g., power, compressor, signaling contact).
  4. ลบเทอร์โมสตัทเก่า: Disconnect the electrical wires and carefully unmount the old thermostat. Gently remove the capillary tube from its sensing location, ensuring it does not get damaged or kinked.
  5. ติดตั้งเทอร์โมสตัทใหม่: Mount the new Danfoss 077B2317L thermostat in the same location as the old one.
  6. การเชื่อมต่อสายไฟ: Reconnect the electrical wires to the new thermostat's terminals (6.3 mm / 4.8 mm) according to your documented diagram. Ensure connections are firm and secure.
  7. Position Capillary Tube: Carefully route the new capillary tube to the exact same sensing location as the original. The placement of the capillary tube is critical for accurate temperature control. Avoid sharp bends or kinks.
  8. ยึดและประกอบกลับเข้าที่: Secure the thermostat and capillary tube in place. Reattach any access panels or housing removed earlier.
  9. ทดสอบ: Plug the appliance back into the power outlet. Set the thermostat to the desired temperature and monitor the appliance's operation to ensure it cools correctly and cycles on/off as expected.
ด้านข้าง view of Danfoss Thermostat 077B2317L showing electrical terminals

ภาพที่ 3: ด้านข้าง view of the thermostat, highlighting the electrical connection terminals.

อีกด้านหนึ่ง view of Danfoss Thermostat 077B2317L showing different electrical terminals

ภาพที่ 4: อีกด้านหนึ่ง view, providing a clearer look at the various electrical terminals for wiring.

5. คู่มือการใช้งาน

Once installed, the Danfoss 25T65 077B2317L thermostat operates automatically to maintain the set temperature within your freezer or refrigerator. Most appliances with this type of thermostat will have an external or internal dial for temperature adjustment.

  • การตั้งค่าอุณหภูมิ: Adjust the temperature dial (if present on your appliance) to your desired coldness level. Typically, a higher number on the dial indicates a colder setting.
  • การติดตาม: Allow several hours for the appliance to reach the new temperature setting. Use an appliance thermometer to verify the internal temperature.
  • Signaling Contact: The integrated signaling contact will activate if the temperature inside the appliance rises significantly, which can occur during defrost cycles or if there is a malfunction. This contact can be wired to an indicator light or alarm system, depending on the appliance's design.

6. การบำรุงรักษา

The Danfoss 25T65 077B2317L thermostat is designed for reliable, long-term operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

  • การตรวจสอบภาพ: Periodically inspect the thermostat and its capillary tube for any signs of physical damage, corrosion, or loose connections.
  • ความสะอาด : Ensure the area around the thermostat and the capillary tube's sensing point is free from ice buildup or debris, which could interfere with accurate temperature sensing.
  • การตรวจสอบอย่างมืออาชีพ: If you suspect a problem, have a qualified technician inspect the thermostat and the appliance's refrigeration system.

7 การแก้ไขปัญหา

หากเครื่องใช้ไฟฟ้าของคุณไม่สามารถรักษาอุณหภูมิที่ถูกต้องได้หลังจากเปลี่ยนเทอร์โมสตัทแล้ว โปรดพิจารณาสิ่งต่อไปนี้:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Appliance not cooling at allNo power, faulty wiring, compressor issue, or completely failed thermostat.Check power supply. Verify wiring connections. Consult a technician for compressor or thermostat testing.
Appliance too warmThermostat set too high, capillary tube improperly placed, or thermostat malfunction.Adjust temperature setting. Ensure capillary tube is correctly positioned. If problem persists, thermostat may need replacement.
Appliance too cold / constantly runningThermostat set too low, capillary tube dislodged, or thermostat stuck in 'on' position.Adjust temperature setting. Verify capillary tube placement. If problem persists, thermostat may need replacement.
Signaling contact constantly activeHigh internal temperature, defrost cycle, or faulty signaling contact.Check appliance temperature. Observe if it's during a defrost cycle. If not, investigate cooling system or thermostat.

หากขั้นตอนการแก้ไขปัญหาเบื้องต้นไม่สามารถแก้ปัญหาได้ ขอแนะนำให้ติดต่อช่างเทคนิคผู้เชี่ยวชาญ

8. ข้อมูลจำเพาะ

ข้อมูลจำเพาะรายละเอียด
ยี่ห้อDanfoss
หมายเลขรุ่น077B2317L
การอ้างอิงผู้ผลิต077B2317L
พิมพ์Mechanical Capillary Thermostat
ความยาวของเส้นเลือดฝอย2600 มม.
การเชื่อมต่อ6.3 mm / 4.8 mm terminals
ขนาดโดยประมาณ (ยาว x กว้าง x สูง)60 x 30 x 25 มม.
คุณสมบัติพิเศษSignaling contact for temperature increase
วัสดุสแตนเลสสตีล (ภายนอก)
การปฏิบัติตามEN 60730-2-9 (as per product title)

9. ข้อมูลการรับประกัน

Specific warranty details for replacement parts like the Danfoss 25T65 077B2317L thermostat typically depend on the retailer or the manufacturer's general policy for spare parts. Please refer to your purchase documentation or contact the seller for precise warranty terms and conditions. Keep your proof of purchase for any warranty claims.

10. การสนับสนุน

For technical assistance, installation guidance, or troubleshooting beyond the scope of this manual, please contact the retailer from whom you purchased the thermostat or a certified appliance repair professional. When seeking support, have your product model number (077B2317L) and any relevant appliance information readily available.

11. รูปภาพผลิตภัณฑ์

สูงสุด view of Danfoss Thermostat 077B2317L

ภาพที่ 5: สูงสุด view of the Danfoss 077B2317L thermostat, showing the main body and mounting points.

ทั่วไป view of Danfoss Thermostat 077B2317L

ภาพที่ 6: General perspective view of the thermostat, highlighting its compact design.

12. วิดีโอผลิตภัณฑ์อย่างเป็นทางการ

No official product videos from the seller are available for this item.

เอกสารที่เกี่ยวข้อง - 077B2317L

พรีview คู่มือการติดตั้ง Danfoss 077B7 Service Thermostats
คู่มือการติดตั้งเทอร์โมสตัทบริการซีรีส์ 077B7 ของ Danfoss ครอบคลุมรุ่นต่างๆ สำหรับตู้ไอศกรีม ตู้เย็นเชิงพาณิชย์ ตู้แช่ของเหลว และอื่นๆ รวมถึงข้อมูลจำเพาะทางเทคนิคและรายละเอียดการใช้งาน
พรีview คู่มือผู้ใช้ระบบทำความร้อนอัจฉริยะ Danfoss Ally™
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับระบบทำความร้อนอัจฉริยะ Danfoss Ally™ ครอบคลุมการติดตั้ง คุณสมบัติ ข้อมูลจำเพาะทางเทคนิค และการแก้ไขปัญหาสำหรับ Gateway, Radiator Thermostat, Room Sensor, Boiler Relay, Protect RA, Power Module และเทอร์โมสตัท Icon™/Icon2™
พรีview คู่มือการติดตั้งเทอร์โมสแตทบริการ Danfoss ประเภท 077B7
คู่มือการติดตั้งสำหรับเทอร์โมสตัทควบคุมอุณหภูมิ Danfoss รุ่น 077B7 (รุ่น 077B7001-077B7008) ให้รายละเอียดเกี่ยวกับข้อมูลจำเพาะ การตั้งค่าอุณหภูมิ ความยาวท่อแคปิลลารี และข้อมูลการใช้งานสำหรับตู้เย็น ตู้แช่แข็ง และตู้แช่เย็น
พรีview คู่มือการใช้งานเทอร์โมสตัท Danfoss Link™ และ Connect สำหรับการควบคุมความร้อน
คู่มือการใช้งาน Danfoss ฉบับนี้ให้ข้อมูลที่ครอบคลุมเกี่ยวกับระบบควบคุมความร้อน Danfoss Link™ และ Connect Thermostats ครอบคลุมส่วนประกอบของระบบ แนวทางทั่วไปสำหรับการจ่ายความร้อนและการจัดการห้อง และรายละเอียดการใช้งานสำหรับหม้อต้มน้ำ หม้อต้มน้ำส่วนกลาง ระบบทำความร้อนส่วนกลาง และปั๊มความร้อน เพื่อเพิ่มประสิทธิภาพการใช้พลังงานและความสะดวกสบายในที่พักอาศัย
พรีview คู่มือการติดตั้งและข้อมูลจำเพาะของเทอร์โมสตัทควบคุมการบริการ Danfoss 077B7
คู่มือการติดตั้งฉบับสมบูรณ์และข้อมูลจำเพาะทางเทคนิคสำหรับเทอร์โมสตัทบริการซีรีส์ Danfoss 077B7 รวมถึงรุ่น 077B7060-077B7068 สำหรับตู้เย็นเชิงพาณิชย์และตู้ไอศกรีม
พรีview Danfoss 077B Thermostat: Technical Specifications and Ordering Information
Detailed technical data, features, applications, and ordering codes for the Danfoss 077B thermostat, designed for precise temperature control in refrigerators, freezers, and coolers.