HOBBYWING EZRUN 1626SD-3500KV

HOBBYWING EZRUN 1626SD-3500KV Motor Instruction Manual

Model: EZRUN 1626SD-3500KV (Part Numbers: 30402653, 30402654, 30402655)

1. บทนำ

This manual provides essential information for the proper installation, operation, and maintenance of your HOBBYWING EZRUN 1626SD-3500KV motor. Please read this manual thoroughly before use to ensure safe and efficient operation.

ข้อควรระวังเพื่อความปลอดภัย

2. สินค้าหมดview

The HOBBYWING EZRUN 1626SD-3500KV motor is designed for high performance in RC applications, offering improved top speed, precise response, and high efficiency with cool operation. Its modular design facilitates easy cleaning and maintenance.

HOBBYWING EZRUN 1626SD-3500KV Motor

Image showing the HOBBYWING EZRUN 1626SD-3500KV motor, highlighting its compact design and connection points.

คุณสมบัติหลัก:

อะไรอยู่ในกล่อง:

3. การตั้งค่าและการติดตั้ง

Proper installation is crucial for the motor's performance and longevity.

การติดตั้งมอเตอร์:

Securely mount the EZRUN 1626SD motor into your RC vehicle's motor mount. Ensure that the motor is firmly attached to prevent movement during operation, which could lead to damage or performance issues.

การเชื่อมต่อสายไฟ:

Connect the motor to a compatible Electronic Speed Controller (ESC), such as the HOBBYWING EzRun Mini28 ESC. Ensure all connections are secure and correctly polarized. Loose connections can cause intermittent power delivery or complete loss of function.

For optimal performance and to utilize features like timing advance, connect the sensor cable from the motor to the ESC, if applicable to your ESC model.

การติดตั้งเฟืองตัวเล็ก:

Install the appropriate pinion gear for your application. Ensure the gear mesh between the pinion and spur gear is correctly set to avoid excessive wear or binding. Never operate the motor at full throttle without a pinion gear installed, as this can cause severe damage due to extremely high RPMs without load.

4. คู่มือการใช้งาน

The EZRUN 1626SD-3500KV motor is designed for smooth and powerful operation when paired with a suitable ESC.

การเพิ่มพลังเริ่มต้น:

After installation, perform a low-speed test to confirm all connections are correct and the motor operates smoothly. Gradually increase throttle to check for any unusual noises or vibrations.

Timing Advance (with EzRun Mini28 ESC):

When used with the HOBBYWING EzRun Mini28 ESC, the motor supports timing advance. This feature can be configured via the ESC settings to significantly increase top speeds. Refer to your EzRun Mini28 ESC manual for detailed instructions on adjusting timing advance.

ลักษณะการทำงาน:

5. การบำรุงรักษา

การบำรุงรักษาอย่างสม่ำเสมอจะช่วยให้มอเตอร์ของคุณมีอายุการใช้งานยาวนานและทำงานได้อย่างมีประสิทธิภาพสูงสุด

การทำความสะอาด:

The modular detachable structure of the EZRUN 1626SD motor allows for convenient daily cleaning. Regularly remove dust, dirt, and debris from the motor's exterior and cooling fins to maintain efficient heat dissipation.

การตรวจติดตามอุณหภูมิ:

Continuously monitor the motor's operating temperature. The motor case should not exceed 100 degrees Celsius (212 degrees Fahrenheit). Prolonged operation above this temperature can cause irreversible damage to the motor's internal magnets.

If the motor consistently runs hot, consider checking your gearing, ESC settings, or vehicle setup for potential issues causing excessive load.

6 การแก้ไขปัญหา

This section addresses common issues you might encounter with your EZRUN 1626SD motor.

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
มอเตอร์ไม่ทำงานหรือทำงานไม่สม่ำเสมอLoose wiring connections; ESC not properly configured; Damaged motor or ESC.Check all wiring for secure connections; Verify ESC settings and calibration; Inspect motor and ESC for visible damage.
Motor overheating (above 100°C / 212°F)Incorrect gearing (too high); Excessive load on the motor; Insufficient cooling; ESC timing too aggressive.Reduce pinion gear size or increase spur gear size; Reduce vehicle weight or resistance; Ensure adequate airflow to the motor; Adjust ESC timing settings.
การสูญเสียการควบคุมระหว่างการดำเนินงานLoose power connections; Radio interference; ESC or receiver malfunction.Inspect all power and signal connections; Check radio system for interference; Test ESC and receiver functionality.
Motor makes unusual noises or vibrates excessivelyImproper gear mesh; Damaged motor bearings; Bent motor shaft; Debris inside motor.Adjust gear mesh; Inspect bearings for wear and replace if necessary; Check motor shaft for straightness; Clean motor interior.

7. ข้อมูลจำเพาะ

ข้อมูลจำเพาะรายละเอียด
ชื่อรุ่นEZRUN 1626 Sensored Motor
เรตติ้ง KV3500KV
เสา2 เสา
เซลล์ลิโพ2S LiPo
น้ำหนักสินค้า2.46 ออนซ์ (ประมาณ 18 กรัม)
ขนาดสินค้า3.6 x 2.7 x 1.25 นิ้ว
วัสดุเหล็กอัลลอยด์
ผู้ผลิตฮอบบี้วิง เทคโนโลยี
หมายเลขรุ่นสินค้า30402653 / 30402654 / 30402655
ยูพีซี088718506243

8. การรับประกันและการสนับสนุน

For warranty information, technical support, or service inquiries, please contact HOBBYWING North America directly or visit their official webไซต์ โปรดเก็บใบเสร็จรับเงินของคุณไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกันใดๆ

Official HOBBYWING Webเว็บไซต์: www.hobbywing.com

เอกสารที่เกี่ยวข้อง - EZRUN 1626SD-3500KV

พรีview HOBBYWING EZRUN MAX8 V3 Brushless ESC User Manual
Comprehensive user manual for the HOBBYWING EZRUN MAX8 V3 Brushless Electronic Speed Controller, covering features, specifications, connections, setup, programming, and troubleshooting for RC vehicles.
พรีview คู่มือผู้ใช้มอเตอร์ไร้แปรงถ่านแบบไร้เซ็นเซอร์ HOBBYWING EZRUN 5690SL G2 / 56118SL G2
คู่มือการใช้งานฉบับสมบูรณ์สำหรับมอเตอร์ไร้แปรงถ่านแบบไร้เซ็นเซอร์ HOBBYWING EZRUN 5690SL G2 และ 56118SL G2 ประกอบด้วยคุณสมบัติ ข้อมูลจำเพาะ การติดตั้ง ระบบเกียร์ การประกอบ และรายการชิ้นส่วน
พรีview คู่มือผู้ใช้ตัวควบคุมความเร็วแบบไร้แปรงถ่านกันน้ำกระเด็น Hobbywing EZRUN Series
คู่มือการใช้งานสำหรับตัวควบคุมความเร็วแบบไร้แปรงถ่านกันน้ำกระเด็น Hobbywing EZRUN Series ครอบคลุมคุณสมบัติ ข้อมูลจำเพาะ การตั้งค่า การตั้งโปรแกรม ฟังก์ชั่นการป้องกัน การแก้ไขปัญหา และอุปกรณ์เสริมเพิ่มเติมสำหรับรถบังคับวิทยุ
พรีview คู่มือผู้ใช้มอเตอร์ไร้แปรงถ่านแบบมีเซ็นเซอร์ Hobbywing EZRUN G2 Series
คู่มือการใช้งานสำหรับมอเตอร์ไร้แปรงถ่านแบบมีเซ็นเซอร์ Hobbywing EZRUN G2 series รวมถึงรุ่น 4990SD G2, 5690SD G2 และ 56118SD G2 ครอบคลุมคำเตือน คุณสมบัติ ข้อมูลจำเพาะ การติดตั้ง ระบบเกียร์ และการประกอบ/ถอดชิ้นส่วน
พรีview คู่มือผู้ใช้ HOBBYWING EZRUN MAX5/MAX6: คู่มือการติดตั้งและการใช้งาน
คู่มือการใช้งานฉบับสมบูรณ์สำหรับตัวควบคุมความเร็วอิเล็กทรอนิกส์ HOBBYWING EZRUN MAX5 และ MAX6 เรียนรู้เกี่ยวกับคุณสมบัติ ข้อมูลจำเพาะ การเชื่อมต่อ การตั้งค่า การตั้งโปรแกรม และการแก้ไขปัญหาสำหรับ ESC ของรถ RC ของคุณ
พรีview คู่มือผู้ใช้ Hobbywing EZRUN MAX8 V3 150A Brushless ESC
คู่มือการใช้งานฉบับสมบูรณ์สำหรับ Hobbywing EZRUN MAX8 V3 150A Brushless ESC ครอบคลุมถึงบทนำ คำเตือน คุณสมบัติ ข้อมูลจำเพาะ การเชื่อมต่อ การตั้งค่า การกำหนดค่าพารามิเตอร์ และการแก้ไขปัญหาสำหรับรถบังคับวิทยุขนาด 1/8