Behringer 110 VCO/VCF/VCA Eurorack Module User Manual

1. บทนำ

The Behringer 110 VCO/VCF/VCA is a comprehensive Eurorack module designed to provide a full analog synth voice within a single 16HP unit. It integrates a Voltage Controlled Oscillator (VCO), a Voltage Controlled Filter (VCF), and a Voltage ควบคุม Amplifier (VCA), offering essential sound generation and shaping capabilities for modular synthesis systems. This module is ideal for users seeking a compact and versatile core voice for their Eurorack setup.

ภาพที่ 1.1: แผงด้านหน้า view of the Behringer 110 VCO/VCF/VCA Eurorack Module, showing its various controls and patch points.

2. คำแนะนำด้านความปลอดภัย

Please read and follow these safety instructions carefully to ensure safe operation and to prevent damage to the module or your Eurorack system.

• แหล่งจ่ายไฟ: Only connect the module to a Eurorack power supply that meets the specified voltage requirements (+12V, -12V, +5V if applicable) and provides sufficient current. Incorrect power can damage the module and other components.
• การติดตั้ง: Ensure the module is correctly oriented before connecting the power ribbon cable. The red stripe on the ribbon cable typically indicates -12V and should align with the corresponding pin on the module and your Eurorack bus board. Refer to your Eurorack case and bus board documentation for proper connection.
• สิ่งแวดล้อม: Operate the module in a dry environment, away from moisture, extreme temperatures, and direct sunlight.
• การบริการ: Do not attempt to service the module yourself. Refer all servicing to qualified personnel.
• การเชื่อมต่อ: Always power down your Eurorack system before installing or removing modules or making significant changes to power connections.

3. การตั้งค่า

3.1. การติดตั้งทางกายภาพ

1. อำนาจลง: Ensure your Eurorack case is completely powered off and unplugged from the mains.
2. Locate Space: Find an available 16HP space in your Eurorack case.
3. เชื่อมต่อพลังงาน: Carefully connect the 10-pin power ribbon cable to the header on the back of the 110 module. Ensure the red stripe on the ribbon cable aligns with the -12V pin on the module's power header. The -12V pin is usually marked with a white stripe or "RED STRIPE" indicator on the PCB.
4. Connect to Bus Board: Connect the other end of the ribbon cable to an available 10-pin header on your Eurorack bus board, again ensuring the red stripe aligns with the -12V rail.
5. โมดูลติดตั้ง: Place the module into the desired position in your case and secure it with Eurorack screws. Do not overtighten.
6. เปิดเครื่อง: Once securely installed, you can power on your Eurorack case. The module should illuminate if it has an indicator LED.

3.2. การเชื่อมต่อเบื้องต้น

To begin using the 110 module, you will typically need to make the following basic connections:

• VCO CV Input: Connect a 1V/Octave CV source (e.g., from a keyboard controller or sequencer) to the VCO CV IN 1 or VCO CV IN 2 jack to control the pitch of the oscillator.
• VCA Output: เชื่อมต่อ VCA HIGH OUT or VCA LOW OUT to an audio mixer or output module to hear the sound.
• Gate/Envelope: To control the VCA's amplitude over time, connect an envelope generator's output to the วีซีเอ ซีวี อิน.

4. Operating the Behringer 110

4.1. ฉบับtage ออสซิลเลเตอร์ควบคุม (VCO)

The VCO generates the primary sound source. It features two waveforms and multiple control voltage inputs for pitch and pulse width modulation.

• RANGE Switch: เลือกช่วงอ็อกเทฟของออสซิลเลเตอร์ (เช่น 32', 16', 8', 4')
• ปุ่มปรับเสียง: Fine-tunes the pitch of the oscillator.
• PULSE WIDTH Knob: Adjusts the width of the square wave output.
• PWM CV IN Jack: Input for an external control voltage เพื่อปรับความกว้างพัลส์
• VCO CV IN 1 & 2 Jacks: Inputs for control voltages (typically 1V/Oct) to control the pitch. These inputs are summed.
• SAW OUT Jack: Outputs the sawtooth waveform.
• SQUARE OUT Jack: Outputs the square waveform.

4.2. ฉบับtage ตัวกรองควบคุม (VCF)

The VCF shapes the timbre of the sound by attenuating frequencies above a certain cutoff point. It is a low-pass filter.

• CUTOFF Knob: Sets the filter's cutoff frequency. Frequencies above this point are attenuated.
• RESONANCE Knob: Adds a peak at the cutoff frequency, emphasizing it. High resonance can lead to self-oscillation.
• ENV MOD Knob: Controls the amount of modulation applied to the cutoff frequency from the VCF ENV IN.
• VCF CV IN Jack: Input for an external control voltage to modulate the cutoff frequency.
• VCF ENV IN Jack: Input for an envelope generator to dynamically control the filter cutoff.
• VCF IN Jack: Audio input for the filter. Connect the VCO SAW OUT or SQUARE OUT here.
• VCF OUT Jack: Outputs the filtered audio signal.

4.3. ฉบับtage ควบคุม Ampตัวฟอก (VCA)

VCA ควบคุมโดยรวม amplitude (volume) of the sound. It is typically modulated by an envelope generator to create dynamic sounds.

• กำไรลูกบิด: Sets the initial gain (volume) of the VCA.
• VCA CV IN Jack: Input for an external control voltage (typically an envelope) to modulate the VCA's gain.
• VCA IN Jack: Audio input for the amplifier. Connect the VCF OUT here.
• VCA HIGH OUT Jack: Outputs the amplified audio signal at a higher level.
• VCA LOW OUT Jack: Outputs the amplified audio signal at a lower level, suitable for certain mixers or effects.

5. การบำรุงรักษา

Proper maintenance ensures the longevity and optimal performance of your Behringer 110 module.

• การทำความสะอาด: Use a soft, dry cloth to clean the module's front panel. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
• พื้นที่จัดเก็บ: When not in use for extended periods, store the module in a stable environment, protected from dust, extreme temperatures, and humidity. If removed from the case, consider using an anti-static bag.
• แจ็คและลูกบิด: Periodically check patch cables and connections for wear. Ensure knobs and switches operate smoothly. Do not force controls.

6 การแก้ไขปัญหา

If you encounter issues with your Behringer 110 module, refer to the following common problems and solutions:

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

สำหรับข้อมูลการรับประกันโดยละเอียด การลงทะเบียนผลิตภัณฑ์ และการสนับสนุนทางเทคนิค โปรดเยี่ยมชมเว็บไซต์อย่างเป็นทางการของ Behringer website. You can find up-to-date information regarding service centers, FAQs, and contact options there.

เบห์ริงเกอร์อย่างเป็นทางการ Webเว็บไซต์: www.behringer.com

เก็บใบเสร็จรับเงินของคุณไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกันใดๆ