SCHLAGE 163604

Schlage 163604 Addison Front Entry Handleset with Accent Lever User Manual

รุ่น : 163604

1. บทนำ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.

Schlage 163604 Addison Handleset components laid out

Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.

2. ข้อมูลด้านความปลอดภัย

โปรดอ่านคำแนะนำทั้งหมดอย่างละเอียดก่อนการติดตั้งและการใช้งาน การไม่ปฏิบัติตามคำแนะนำเหล่านี้อาจส่งผลให้ผลิตภัณฑ์ ทรัพย์สิน หรือการบาดเจ็บส่วนบุคคลเสียหายได้

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง:

4. การตั้งค่าและการติดตั้ง

The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.

4.1 การเตรียมประตู

  1. Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
  2. If replacing an existing handleset, remove the old hardware.

4.2 Installing the Latch

  1. Insert the latch into the edge bore hole of the door.
  2. Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.

4.3 Installing the Exterior Handleset

  1. Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
  2. Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.

4.4 Installing the Interior Lever

  1. Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
  2. Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.

4.5 การติดตั้งแผ่นสไตรค์

  1. จัดตำแหน่งแผ่นรับกลอนให้ตรงกับสลักกลอนบนวงกบประตู
  2. Mark and chisel out the necessary area for a flush fit, if required.
  3. Secure the strike plate with the provided screws.

5. คู่มือการใช้งาน

To operate your Schlage Addison Handleset:

6. การบำรุงรักษา

การบำรุงรักษาอย่างเหมาะสมจะช่วยให้ชุดมือจับประตูของคุณใช้งานได้ยาวนานและราบรื่น

7 การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Lever/Thumbpiece is stiff or stickyLack of lubrication, dirt buildup, misaligned componentsApply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation.
Key does not turn smoothlyDirt in keyway, worn key, lock mechanism needs lubricationApply graphite lubricant to the keyway. Try a spare key.
ประตูไม่สามารถปิดล็อคได้อย่างถูกต้องStrike plate misalignment, latch bolt obstructionAdjust the strike plate position. Ensure no debris is blocking the latch bolt.
Handleset feels looseสกรูยึดหลวมขันสกรูยึดที่มองเห็นได้ทั้งหมดให้แน่น

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage webเว็บไซต์หรือดูบัตรรับประกันที่รวมอยู่ในผลิตภัณฑ์ของคุณ

หากต้องการความช่วยเหลือเพิ่มเติม โปรดไปที่ ร้าน SCHLAGE.