Cisco WS-C2960-48TT-L

Cisco WS-C2960-48TT-L Catalyst 2960 48-Port Managed Fast Ethernet Switch User Manual

การแนะนำ

This manual provides instructions for the Cisco WS-C2960-48TT-L Catalyst 2960 48-Port Managed Fast Ethernet Switch. It covers installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

ข้อมูลด้านความปลอดภัย

Always follow local and national electrical codes. Ensure proper grounding. Do not operate the switch in wet or excessively humid environments. Disconnect power before cleaning or servicing. Refer to official Cisco documentation for detailed safety guidelines.

การตั้งค่า

1. การแกะกล่อง

Carefully remove the switch from its packaging. Verify all components are present: the switch unit, power cord, and any included mounting hardware.

2. การติดตั้งทางกายภาพ

The Cisco Catalyst 2960 switch is designed for rack-mounting.

Secure the switch in a standard 19-inch equipment rack using the provided rack-mount brackets and screws. Ensure adequate ventilation around the unit.

3. การเชื่อมต่อไฟฟ้า

Connect the power cord to the AC power inlet on the rear of the switch and then to a grounded electrical outlet.

4. การเชื่อมต่อเครือข่าย

Connect Fast Ethernet devices (computers, servers, other network devices) to the 48 10/100 RJ45 ports on the front panel using standard Ethernet cables.

Utilize the 2 dual-purpose uplink ports for Gigabit copper or fiber connections to connect to your core network or other switches.

For initial configuration, connect a console cable to the console port and a computer running terminal emulation software.

Cisco WS-C2960-48TT-L Catalyst 2960 48-Port Managed Fast Ethernet Switch front view

ภาพ: ด้านหน้า view of the Cisco WS-C2960-48TT-L Catalyst 2960 switch, showing the 48 Fast Ethernet ports and uplink ports.

การใช้งานสวิตช์

1. เปิดเครื่อง

After connecting power, the switch will automatically power on. Observe the system LED indicators for status.

2. ไฟ LED

3. Basic Configuration (Cisco IOS)

The switch runs Cisco IOS software. Initial configuration typically involves setting up IP addresses, VLANs, and basic security. This is usually done via the console port or a web interface (if enabled). Refer to the Cisco documentation for detailed IOS configuration guides.

The switch supports Layer 2 switching with static Layer 3 routing capabilities, VLANs, Quality of Service (QoS), and various security features.

การซ่อมบำรุง

1. การทำความสะอาด

Keep the switch clean and free from dust. Use a soft, dry cloth for external cleaning. Do not use liquid cleaners.

2. การอัปเดตเฟิร์มแวร์

ตรวจสอบข้อมูลอย่างเป็นทางการจากซิสโก้เป็นระยะ website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow Cisco's instructions for firmware upgrade procedures.

3. สภาพแวดล้อม

Ensure the operating environment maintains a temperature below 40 degrees Celsius and appropriate humidity levels to prevent overheating and component damage.

การแก้ไขปัญหา

1. ไม่มีอำนาจ

2. No Network Connectivity on a Port

3. ประสิทธิภาพเครือข่ายช้า

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
แบบอย่างWS-C2960-48TT-L
ยี่ห้อซิสโก้
จำนวนพอร์ต48 Fast Ethernet 10/100 ports + 2 dual-purpose Gigabit uplink ports
อัตราการถ่ายโอนข้อมูล100 Megabits Per Second (Fast Ethernet), Gigabit (Uplink)
ประเภทอินเทอร์เฟซRJ45, เอสเอฟพี
การรองรับเลเยอร์Layer 2 switching with static Layer 3 routing support
ระบบปฏิบัติการCisco IOS software
ขนาดสินค้า20 x 15 x 5.5 นิ้ว
น้ำหนักสินค้า9.73 ปอนด์
คะแนนอุณหภูมิบน40 องศาเซลเซียส
วัสดุตัวเรือนโลหะ

การรับประกันและการสนับสนุน

This product is sold as an Amazon Renewed item. Renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee if not satisfied with the purchase.

For specific technical support, refer to the official Cisco support resources and documentation available on their website. For issues related to your Amazon Renewed purchase, please contact Amazon customer service or the seller, Global Phone Supply.

เอกสารที่เกี่ยวข้อง - WS-C2960-48TT-L

พรีview คู่มือการเปลี่ยนผ่านซีรีส์ Cisco Catalyst 2960/2960-SF/2960-S
คู่มือการเปลี่ยนจากรุ่นสวิตช์ Cisco Catalyst รุ่นเก่าไปเป็นซีรีส์ Cisco Catalyst 2960-L โดยเน้นที่คุณลักษณะและเส้นทางการไมเกรชัน
พรีview คู่มือการกำหนดค่า Cisco Smart Install
เรียนรู้วิธีการกำหนดค่า Cisco Smart Install สำหรับการใช้งานแบบ Zero-touch และการจัดการอิมเมจ/การกำหนดค่าของสวิตช์เครือข่าย Cisco ได้อย่างมีประสิทธิภาพ คู่มือนี้ครอบคลุมการตั้งค่า การจัดการไคลเอ็นต์ การกำหนดค่า DHCP/TFTP และกลยุทธ์การจัดกลุ่ม
พรีview คู่มือสวิตช์ Cisco: ครอบคลุมมากกว่าview ของโซลูชั่นการสลับ LAN
โอเวอร์view ของกลุ่มผลิตภัณฑ์สวิตช์ LAN ที่ครอบคลุมของ Cisco ซึ่งมีรายละเอียดเกี่ยวกับสวิตช์แบบโมดูลาร์ การกำหนดค่าคงที่ แบบเบลด และแบบเสมือนสำหรับ campเครือข่ายของเรา สาขา และศูนย์ข้อมูล เน้นย้ำถึงความสามารถในการปรับขนาด ความสามารถอัจฉริยะ และคุณสมบัติขั้นสูง
พรีview หมายเหตุการเผยแพร่สวิตช์ซีรีส์ Cisco Catalyst 3560-CX และ 2960-CX - Cisco IOS 15.2(7)Ex
หมายเหตุการเผยแพร่สำหรับซอฟต์แวร์ Cisco IOS เวอร์ชัน 15.2(7)Ex สำหรับสวิตช์ซีรีส์ Catalyst 3560-CX และ 2960-CX พร้อมรายละเอียดคุณลักษณะ ข้อควรระวัง และข้อกำหนดของระบบ
พรีview สวิตช์ซีรีส์ Cisco Catalyst 3560-CX และ 2960-CX: คุณสมบัติ ข้อมูลจำเพาะ และคำถามที่พบบ่อย
เอกสารคำถามที่พบบ่อยที่ครอบคลุมซึ่งให้รายละเอียดเกี่ยวกับคุณลักษณะ ข้อมูลจำเพาะ การเปรียบเทียบ การติดตั้ง ฮาร์ดแวร์ ซอฟต์แวร์ ความปลอดภัย พลังงาน ประสิทธิภาพการใช้พลังงาน และข้อมูลการรับประกันสำหรับสวิตช์เครือข่ายขนาดกะทัดรัดซีรีส์ Cisco Catalyst 3560-CX และ 2960-CX
พรีview คู่มือการตั้งค่า Cisco Catalyst 2960-L Series อย่างง่ายดาย
คู่มือทีละขั้นตอนเพื่อตั้งค่าสวิตช์ Cisco Catalyst 2960-L Series ได้อย่างง่ายดาย ครอบคลุมการเชื่อมต่อและการกำหนดค่าพื้นฐาน