1. บทนำ
This manual provides essential instructions for the safe and effective use of your Fulbat FTX16 12V 14.7Ah Sealed Lead Acid (SLA) battery. Designed for lawn and garden equipment, this battery offers reliable power and a maintenance-free experience. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.
2. ข้อมูลด้านความปลอดภัย
Always prioritize safety when handling batteries. Failure to follow these instructions can result in personal injury or damage to the battery or equipment.
- การปกป้องดวงตา: ควรสวมอุปกรณ์ป้องกันดวงตาที่เหมาะสม (แว่นนิรภัยหรือแว่นกันลม) ทุกครั้งเมื่อทำงานกับแบตเตอรี่
- ห้ามมีประกายไฟหรือเปลวไฟ: Keep sparks, open flames, and smoking materials away from the battery. Batteries can produce explosive gases.
- การระบายอากาศ : Ensure adequate ventilation when charging or working with batteries in enclosed spaces.
- เครื่องมือหุ้มฉนวน: ควรใช้เครื่องมือที่มีฉนวนหุ้มเพื่อป้องกันการลัดวงจรโดยไม่ตั้งใจ
- เก็บให้พ้นมือเด็ก: Batteries contain corrosive materials and should be stored safely away from children.
- การกำจัดที่ถูกต้อง: กำจัดแบตเตอรี่เก่าอย่างถูกวิธี ณ ศูนย์รีไซเคิลที่ได้รับอนุญาต ห้ามทิ้งรวมกับขยะในครัวเรือน
- ปฐมพยาบาล: In case of contact with battery acid, flush immediately with water and seek medical attention.
3. คุณสมบัติของผลิตภัณฑ์
The Fulbat FTX16 battery is engineered for high performance and convenience:
- Sealed Lead Acid (SLA) Technology: Provides maximum performance and safety.
- พร้อมใช้งาน: No initial acid filling or preparation required.
- 100% Maintenance-Free: Designed for hassle-free operation without the need for regular fluid checks.
- Non-Spillable (VRLA): The Valve Regulated Lead Acid design ensures the battery is completely sealed and non-spillable, allowing for flexible mounting.
- Optimal for Lawn & Garden: Ideal for various ride-on lawn mowers and garden tractors.

รูปที่ 1 : ด้านหน้า view of the Fulbat FTX16 12V 14.7Ah SLA Battery, highlighting its non-spillable design and specifications.
4. การตั้งค่าและการติดตั้ง
Follow these steps for safe and correct installation of your Fulbat FTX16 battery:
- การตระเตรียม: Ensure the ignition of your equipment is off and remove the key. Wear safety glasses and gloves.
- ถอดแบตเตอรี่เก่าออก: First, disconnect the negative (-) terminal cable, then the positive (+) terminal cable from the old battery. Carefully remove the old battery.
- Inspect Battery Tray: Clean the battery tray and terminal cables, removing any corrosion or debris.
- ตำแหน่งการติดตั้งแบตเตอรี่ใหม่: Place the Fulbat FTX16 battery securely in the battery tray. Ensure it is stable and does not move during operation. The non-spillable design allows for mounting angles up to +/- 90 degrees.
- เชื่อมต่อแบตเตอรี่ใหม่: First, connect the positive (+) terminal cable to the positive (+) terminal of the new battery. Then, connect the negative (-) terminal cable to the negative (-) terminal. Ensure all connections are tight and secure.
- การป้องกันเทอร์มินัล: ทาจาระบีฉนวนไฟฟ้าบางๆ หรือสเปรย์ป้องกันการกัดกร่อนที่ขั้วต่อเพื่อป้องกันการกัดกร่อน

Figure 2: The Fulbat FTX16 battery shown alongside its retail packaging, indicating its 'Lawn & Garden' application.

Figure 3: Diagram illustrating the permissible mounting angles for the Fulbat FTX16 battery, up to +/- 90 degrees, due to its non-spillable GEL technology.
5. คู่มือการใช้งาน
Once installed, the Fulbat FTX16 battery is ready for use. It is designed to provide reliable starting power for your equipment.
- การใช้งานเบื้องต้น: As a 'Ready to Use' battery, it typically does not require an initial charge before first use. However, if the equipment struggles to start, a full charge with a compatible charger is recommended.
- การดำเนินงานปกติ: The battery will recharge during normal operation of your equipment.
- พื้นที่จัดเก็บ: If the equipment will be stored for an extended period, especially in cold conditions, it is advisable to disconnect the battery and store it in a cool, dry place, ensuring it is fully charged. Periodically check the voltage and recharge if it drops below 12.5V.
6. การบำรุงรักษา
The Fulbat FTX16 is a 100% maintenance-free battery, meaning it does not require water refilling or specific fluid level checks. However, some general care practices will help prolong its lifespan:
- รักษาความสะอาด: Regularly inspect the battery and terminals for dirt, dust, or corrosion. Clean with a damp cloth and a mild detergent if necessary. Ensure terminals are dry before reconnecting.
- ตรวจสอบการเชื่อมต่อ: Periodically ensure that the terminal connections are tight and secure. Loose connections can lead to poor performance and potential damage.
- การชาร์จ: If the battery is discharged, use a charger specifically designed for SLA/AGM batteries. Avoid overcharging, as this can damage the battery. Refer to the charger's instructions for proper use. For standard charging, a rate of 1.4A for 5-10 hours is suggested, or a quick charge at 7.0A for 1 hour.
- หลีกเลี่ยงการตกขาวลึก: Do not allow the battery to fully discharge repeatedly, as this can shorten its lifespan.

Figure 4: The Fulbat FTX16 battery displayed on a dark surface, showcasinด้วยดีไซน์ที่กะทัดรัดและความทนทานasing.
7 การแก้ไขปัญหา
หากคุณพบปัญหาเกี่ยวกับแบตเตอรี่ โปรดพิจารณาขั้นตอนการแก้ไขปัญหาทั่วไปต่อไปนี้:
- Equipment Not Starting:
- Check battery terminal connections for tightness and corrosion.
- ตรวจสอบปริมาณแบตเตอรี่tage with a multimeter. If below 12V, the battery may need charging.
- Ensure the equipment's starter motor and charging system are functioning correctly.
- แบตเตอรี่ไม่เก็บประจุ:
- Confirm the charging system of your equipment is working.
- Ensure no parasitic drains are present when the equipment is off.
- The battery may have reached the end of its service life and require replacement.
- Swollen Battery Casing: นี่แสดงว่ามีการชาร์จไฟเกินอย่างรุนแรงหรือเกิดความเสียหายภายใน ควรหยุดใช้งานทันทีและเปลี่ยนแบตเตอรี่ใหม่
If problems persist after performing these checks, consult a qualified technician or contact Fulbat customer support.
8. ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| ยี่ห้อ | ฟุลบัต |
| แบบอย่าง | FTX16 |
| เล่มที่tage | 12 โวลต์ |
| Capacity (20h) | 14.7 อ่า |
| Cranking เย็น Amps (EN) | 230เอ |
| ขนาด (กว้าง x ยาว x สูง) | 150 x 87 x 161 มม. |
| น้ำหนัก | 5.8 กิโลกรัม |
| ประเภทแบตเตอรี่ | SLA (Sealed Lead Acid) / VRLA |
| ประเภทเทอร์มินัล | เอสเออี |
| การซ่อมบำรุง | ไม่ต้องบำรุงรักษา |
| ป้องกันการรั่วไหล | Yes, Non-Spillable |
| มุมติดตั้ง | Up to +/- 90 degrees |
9. การรับประกันและการสนับสนุน
For information regarding warranty coverage, claims, or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. You may also visit the official Fulbat website for general product information and contact details.





