Notifier FCM-1REL แอดเดรส Releasinคู่มือผู้ใช้โมดูลควบคุม g

1. บทนำ

This manual provides essential information for the proper installation, operation, and maintenance of the Notifier FCM-1REL Addressable Releasing Control Module. The FCM-1REL is designed to integrate with compatible FlashScan fire alarm control panels (FACPs) to provide addressable control for releasing applications, such as fire suppression systems.

It is imperative that all personnel involved in the installation, programming, and maintenance of this device are fully trained and qualified in fire alarm system procedures and local codes.

2. ข้อมูลด้านความปลอดภัย

WARNING: Risk of Electric Shock and System Malfunction.

• Installation and wiring must be performed by qualified personnel in accordance with all national and local electrical codes, regulations, and standards.
• Always disconnect power from the fire alarm control panel before installing, servicing, or removing the module.
• Ensure all connections are secure and correct to prevent system faults or improper operation.
• This module is part of a life safety system. Any modifications or improper installation can compromise the system's integrity and effectiveness.

3. สินค้าหมดview

The Notifier FCM-1REL is an addressable control module specifically designed for releasing applications within a FlashScan intelligent fire alarm system. It allows the FACP to activate releasing devices, such as solenoids for sprinkler systems or pre-action valves, based on programmed alarm conditions.

คุณสมบัติหลัก:

• Addressable communication with FlashScan compatible FACPs.
• Designed for releasinแอปพลิเคชัน g
• Monitors and controls external devices.

ส่วนประกอบ:

The module consists of a circuit board housed within a durable plastic casing, designed for mounting in a standard electrical box. It features terminal blocks for wiring connections to the Signaling Line Circuit (SLC) and the releasing device circuit.

รูปที่ 3.1 : ด้านหน้า view of the Notifier FCM-1REL module, showing terminal connections for auxiliary power and SLC, along with the mounting bracket.

4. การตั้งค่าและการติดตั้ง

The FCM-1REL module is designed for mounting in a standard 4-inch square electrical box. Ensure adequate space for wiring and proper ventilation.

ขั้นตอนการติดตั้ง:

1. การตัดการเชื่อมต่อไฟฟ้า: Before beginning installation, ensure all power to the fire alarm control panel and associated circuits is disconnected.
2. การติดตั้ง: Mount the FCM-1REL module securely into a compatible electrical box using the provided screws.
3. การเดินสายไฟ:
   • Connect the Signaling Line Circuit (SLC) wires to the designated terminals (e.g., T1, T2). Observe polarity.
   • Connect the releasing device circuit wires to the appropriate output terminals (e.g., T7, T8). Refer to the specific wiring diagram for your application.
   • Connect auxiliary power (if required) to the designated terminals (e.g., T10, T11).
   • Ensure all connections are tight and insulation is intact.
4. การตั้งค่าที่อยู่: Set the module's address using the rotary switches or dip switches (if present) according to the FACP's programming requirements.
5. การตรวจสอบ: After wiring, verify all connections are correct and secure before restoring power.

Figure 4.1: Notifier FCM-1REL module as supplied in its protective packaging, illustrating the rear view and terminal layout.

5. คู่มือการใช้งาน

The Notifier FCM-1REL module operates under the control of a compatible FlashScan fire alarm control panel (FACP). Its primary function is to receive commands from the FACP to activate connected releasinอุปกรณ์ g

การทำงานปกติ:

In a normal state, the module continuously monitors its connected releasing circuit and communicates its status to the FACP. The FACP will indicate a normal condition for the module's address.

เรเลasing Operation:

Upon receiving a release command from the FACP (triggered by programmed alarm conditions), the FCM-1REL will activate its output circuit, energizing the connected releasing device (e.g., solenoid). This action initiates the release of the fire suppression agent.

ตัวบ่งชี้สถานะ:

The module may feature an LED indicator (check specific model documentation) that provides visual status:

• ปกติ: Flashing green (typical).
• Alarm/Active: Solid red (typical).
• ปัญหา: Flashing amber (typical).

6. การบำรุงรักษา

Regular maintenance is crucial for the reliable operation of the FCM-1REL module and the overall fire alarm system.

การบำรุงรักษาที่แนะนำ:

• การตรวจสอบภาพ: Periodically inspect the module for any signs of physical damage, loose connections, or environmental issues (e.g., moisture, excessive dust).
• การทดสอบระบบ: Conduct regular system tests as required by local codes and manufacturer guidelines. This includes testing the functionality of the releasing circuit controlled by the FCM-1REL.
• การทำความสะอาด: If necessary, gently clean the module's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• เอกสารประกอบ: Keep accurate records of all inspections, tests, and maintenance performed.

Always refer to the fire alarm control panel's manual and relevant NFPA standards for comprehensive system maintenance procedures.

7 การแก้ไขปัญหา

If the FCM-1REL module or the associated releasing circuit reports a trouble condition to the FACP, follow these general troubleshooting steps:

• Check FACP Display: Note the specific trouble message displayed on the fire alarm control panel. This often provides valuable diagnostic information.
• ตรวจสอบสายไฟ: Power down the FACP and visually inspect all wiring connections to the FCM-1REL module and the connected releasing device. Look for loose wires, damaged insulation, or incorrect polarity.
• ตรวจสอบพลังงาน: Ensure that the module is receiving adequate power (if auxiliary power is used).
• ที่อยู่โมดูล: Confirm that the module's address is correctly set and matches the FACP programming.
• Consult FACP Manual: Refer to the fire alarm control panel's installation and programming manual for specific troubleshooting guides related to addressable modules and releasinวงจร g
• ความช่วยเหลือจากมืออาชีพ: If the trouble persists after performing basic checks, contact a qualified fire alarm technician or Notifier technical support for further assistance.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

Specific warranty information for the Notifier FCM-1REL module is not provided within this document. For details regarding warranty coverage, terms, and conditions, please refer to the original product packaging, purchase documentation, or contact Notifier directly.

For technical support, installation assistance, or to report issues, please contact your authorized Notifier distributor or a qualified fire alarm system professional.

You can also visit the official Notifier webเว็บไซต์สำหรับแหล่งข้อมูลเพิ่มเติมและข้อมูลการติดต่อ